*2013/12/16 15:30:11.49 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : UTC 2004/05/29 16:43:32.000 TIME INCREMENT : 0 0 0 0.416667E-01 0 ! (day hr min sec ms) NUMBER OF RECORDS : 54 DATA DESCRIPTION : CTD FILE TYPE : ASCII NUMBER OF CHANNELS : 8 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- --------------- -------------- -------------- 1 Pressure decibar 3.426667 55.97645 2 Temperature:Primary 'deg C (ITS90)' 8.404671 11.41009 3 Transmissivity %/metre 39.98571 53.14348 4 Oxygen:Dissolved:SBE mL/L 5.183033 6.905334 5 Fluorescence:URU mg/m^3 0.656 4.530364 6 PAR uE/m^2/sec 0.5573226 87.478 7 Salinity:T0:C0 PSS-78 31.27136 32.22178 8 Number_of_bin_records n/a 9 38 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 6 F ' ' 1 4 -99 ' ' 7 F ' ' 2 5 -99 ' ' 8 F ' ' 3 6 -99 ' ' 7 F ' ' 1 7 -99 ' ' 9 F ' ' 4 8 ' ' ' ' 5 I I 0 $END $REMARKS This file converted from Sea-Bird file: Q:\Cruise_Data\2004-09\CTD\derive\200 $END *ADMINISTRATION MISSION : 2004-09 AGENCY : IOS, Ocean Science and Productivity, Sidney, B.C. COUNTRY : Canada PROJECT : La Perouse / Copra SCIENTIST : Robert M. PLATFORM : John P. Tully *LOCATION GEOGRAPHIC AREA : WCVI / Cape Scott STATION : CS5 EVENT NUMBER : 71 LATITUDE : 50 56.02000 N ! (deg min) LONGITUDE : 129 0.00000 W ! (deg min) WATER DEPTH : 65.5 ALTIMETER (M) : 9.72 ! custom item $REMARKS Altimeter value is distance from bottom and is calculated as the median of the deepest 2 metres of data. $END *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-911plus SERIAL NUMBER : 0585 $TABLE: SENSORS ! Name Abs Depth Serial No ! ------------------------- -------------- ---------- temperature:primary ' ' 2023 conductivity:primary ' ' 1763 pressure ' ' 77511 temperature:secondary ' ' 2095 conductivity:secondary ' ' 1764 Fluorometer ' ' Seapoint Oxygen:SBE ' ' 0047 transmissometer:primary ' ' 333DR irradiance ' ' primary altimeter: ' ' ' ' $END $REMARKS SOFTWARE VERSION SEASAVE WIN32 V 5.30A $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- SBE_IOS 2.7 2004/09/01 18:52:33 7568 7568 CLEAN 4.7 2004/09/02 09:59:07 7565 7565 SHIFTDAT 3.3 2004/09/02 18:02:21 ? ? SHIFTDAT 3.3 2004/09/02 18:31:38 ? ? SHIFTDAT 3.3 2004/09/02 19:03:15 ? ? SHIFTDAT 3.3 2004/09/02 19:35:23 ? ? DELETE 6.3 2004/09/02 19:59:26 7565 1124 CTDEDIT 4.50 2004/09/09 14:51:36 1124 913 CALIB 11.4 2004/09/13 11:42:07 913 913 CALIB 11.4 2004/09/13 13:02:53 913 913 FILTERS 4.3 2004/09/13 13:47:02 913 913 BINAVE 4.0.1 2004/09/13 13:52:36 913 54 CLEAN 4.7 2004/09/13 14:15:22 54 54 CLEAN 4.7 2004/09/13 14:29:30 54 54 REMOVECH 6.0 2004/09/13 14:43:54 54 54 HDREDIT2 2.2 2004/09/13 14:58:37 ? ? CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:30:11 54 54 $END $REMARKS -CLEAN functions: Interpolation by Channel 1: Scan_Number [n/a] in Pressure Set event to last 4 characters of file name -The following SHIFT parameters were used. Shift Channel: Conductivity:Primary # of Records to Advance (-ve for Delay): At REC# 0 Shift= -0.20 Salinity was recalculated after shift -The following SHIFT parameters were used. Shift Channel: Conductivity:Secondary # of Records to Advance (-ve for Delay): At REC# 0 Shift= -0.20 Salinity was recalculated after shift -The following SHIFT parameters were used. Shift Channel: Oxygen:Dissolved:SBE # of Records to Advance (-ve for Delay): At REC# 0 Shift=120.00 Salinity was recalculated after shift -The following SHIFT parameters were used. Shift Channel: Fluorescence:Seapoint # of Records to Advance (-ve for Delay): At REC# 0 Shift= 36.00 Salinity was recalculated after shift -The following DELETE parameters were used: Surface Record Removal: Last Press Min Maximum Surface Pressure (relative): 10.00 Surface Swell Pressure Tolerance: 1.00 Pressure filtered over width: 15 Swells deleted. Warning message if pressure difference of 2.00 Drop rates < 0.30m/s (calculated over 11 points) will be deleted. Drop rate applies in the range 10.00 to 46.43 dbars Sample interval (from FILE section of header) = 0.042 seconds. -The following CALIB parameters were used: Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = Q:\Cruise_Data\2004-09\CTD\doc\2004-09-recal1.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 2 Pressure decibar 10 0.2000000E+00 0.1000000E+01 8 Oxygen:Dissolved:SBE mL/L 10 0.2870000E-01 0.1057800E+01 15 Salinity:T0:C0 PSS-78 10 0.1000000E-02 0.1000000E+01 -The following CALIB parameters were used: Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = Q:\Cruise_Data\2004-09\CTD\doc\2004-09-recal2.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 8 Oxygen:Dissolved:SBE mL/L 10 -0.3000000E-01 0.1000000E+01 -The following FILTER parameters were used. Median filter was used. Filter width = 11 The following channel(s) were filtered. Fluorescence:Seapoint -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 1.00 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -CLEAN functions: Insert Pad Values in Channel: Transmissivity [%/metre] where channel Pressure [decibar] is in the range 350 to 10000 3873 data records in pad range. -CLEAN functions: Insert Pad Values in Channel: Oxygen:Dissolved:SBE [mL/L] where channel Pressure [decibar] is in the range 1100 to 10000 1363 data records in pad range. -The following CHANNEL(S) were removed from file. Scan_Number Temperature:Secondary Conductivity:Primary Conductivity:Secondary Oxygen:Voltage:SBE Status:Pump Altimeter Descent_Rate Salinity:T1:C1 Flag -HEADER EDITS: Applied edit header: Q:\Cruise_Data\2004-09\CTD\doc\2004-09-ctd-header1.txt Channel 1: Pressure [decibar] Units ==> dbars Format: F11.2 ==> F7.1 Channel 2: Temperature:Primary [deg C (ITS90)] (no changes) Channel 3: Transmissivity [%/metre] (no changes) Channel 4: Oxygen:Dissolved:SBE [mL/L] Format: F8.3 ==> F7.2 Channel 5: Fluorescence:Seapoint [mg/m^3] Name ==> Fluorescence:URU Channel 7: Salinity:T0:C0 [PSS-78] (no changes) Channel 8: Number_of_bin_records [n/a] Format: F5.0 ==> I5 Channel 6: PAR [uE/m^2/sec] Format: F11.3 ==> F7.1 $END *COMMENTS SBE HEADER Sea-Bird SBE 9 Data File: FileName = C:\DATA\2004-09\2004-09-0071.dat Software Version Seasave Win32 V 5.30a Temperature SN = 2023 Conductivity SN = 1763 Number of Bytes Per Scan = 30 Number of Voltage Words = 4 Number of Scans Averaged by the Deck Unit = 1 System UpLoad Time = Jun 29 2004 16:44:04 NMEA Latitude = 50 56.02 N NMEA Longitude = 129 00.00 W NMEA UTC (Time) = May 29 2004 16:43:32 Store Lat/Lon Data = Add to Header Only Ship: J.P. Tully Cruise: 2004-07 Station: cs5 Depth: 65.5 # nquan = 17 # nvalues = 7568 # units = specified # name 0 = scan: Scan Count # name 1 = prDM: Pressure, Digiquartz [db] # name 2 = t090C: Temperature [ITS-90, deg C] # name 3 = t190C: Temperature, 2 [ITS-90, deg C] # name 4 = c0S/m: Conductivity [S/m] # name 5 = c1S/m: Conductivity, 2 [S/m] # name 6 = xmiss: Beam Transmission, Chelsea/Seatech/Wetlab CStar [%] # name 7 = sbeox0ML/L: Oxygen, SBE 43 [ml/l] # name 8 = sbeox0V: Oxygen Voltage, SBE 43 # name 9 = flSP: Fluorescence, Seapoint # name 10 = par: PAR/Irradiance, Biospherical/Licor # name 11 = pumps: Pump Status # name 12 = altM: Altimeter [m] # name 13 = dz/dtM: Descent Rate [m/s] # name 14 = sal00: Salinity [PSU] # name 15 = sal11: Salinity, 2 [PSU] # name 16 = flag: flag # span 0 = 1, 7568 # span 1 = 0.168, 56.433 # span 2 = 8.3827, 11.4112 # span 3 = 8.3803, 11.4126 # span 4 = 0.429466, 3.564080 # span 5 = 0.602460, 3.564473 # span 6 = 24.5744, 90.5342 # span 7 = 4.63220, 7.78585 # span 8 = 2.7070, 3.6178 # span 9 = 2.1612e-01, 5.8315e+00 # span 10 = 5.5120e-01, 3.7924e+02 # span 11 = 0, 1 # span 12 = 0.00, 100.00 # span 13 = -1.132, 2.056 # span 14 = 3.1796, 32.2385 # span 15 = 4.5764, 32.2397 # span 16 = 0.0000e+00, 0.0000e+00 # interval = seconds: 0.0416667 # start_time = Jun 29 2004 16:44:04 # bad_flag = -9.990e-29 # sensor 0 = Frequency 0 temperature, primary, 2023, 20-Dec-03 # sensor 1 = Frequency 1 conductivity, primary, 1763, 19-Dec-03, cpcor = -9.57 00e-08 # sensor 2 = Frequency 2 pressure, 77511, 30-Mar-00 # sensor 3 = Frequency 3 temperature, secondary, 2095, 05-Sep-03 # sensor 4 = Frequency 4 conductivity, secondary, 1764, 05-Sep-03, cpcor = -9. 5700e-08 # sensor 5 = Extrnl Volt 0 Fluorometer, Seapoint, primary # sensor 6 = Extrnl Volt 2 Oxygen, SBE, primary, 0047, 13-Jan-04 # sensor 7 = Extrnl Volt 3 transmissometer, primary, 333DR, 2-Jan-04 # sensor 8 = Extrnl Volt 4 irradiance (PAR), primary, 4615, 15-Dec-00 # sensor 9 = Extrnl Volt 6 altimeter # datcnv_date = Sep 01 2004 14:00:57, 5.30a # datcnv_in = Q:\Cruise_Data\2004-09\CTD\2004-09-0071.dat Q:\Cruise_Data\2004-09 \CTD\2004-09-CTD3.CON # datcnv_skipover = 0 # wildedit_date = Sep 01 2004 15:00:44, 5.30a # wildedit_in = Q:\Cruise_Data\2004-09\CTD\convert\2004-09-0071.cnv # wildedit_pass1_nstd = 2.0 # wildedit_pass2_nstd = 5.0 # wildedit_pass2_mindelta = 0.000e+000 # wildedit_npoint = 50 # wildedit_vars = prDM # wildedit_excl_bad_scans = yes # celltm_date = Sep 01 2004 16:04:35, 5.30a # celltm_in = Q:\Cruise_Data\2004-09\CTD\wildedit\2004-09-0071.cnv # celltm_alpha = 0.0200, 0.0200 # celltm_tau = 7.0000, 7.0000 # celltm_temp_sensor_use_for_cond = primary, secondary # Derive_date = Sep 01 2004 16:26:42, 5.30a # Derive_in = Q:\Cruise_Data\2004-09\CTD\celltm\2004-09-0071.cnv Q:\Cruise_Data\ 2004-10\CTD files\2004-10-CTDa.CON # file_type = ascii END* CTDEDIT was used to remove surface records to 3.2db and a few records from the bottom of the cast; salinity was cleaned. The fluorescence and transmissivity data are nominal and unedited except that some records were removed in editing T and S. Transmissivity was replaced with pad values below 350m. The CTD Dissolved Oxygen data in the CTD files should be considered: • ±0.15ml/l from 0db–100db. • ±0.10ml/l from 100db – 200db • ±0.05ml/l from 200 – 1100db • Data from below 1100db was removed since it is considered unreliable. *CALIBRATION $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------------------- --------- ---- ------ ------------ Pressure decibar 10 -99 () (0.2 1) Oxygen:Dissolved:SBE mL/L 10 -99 () (0.287E-01 1.0578) Salinity:T0:C0 PSS-78 10 -99 () (0.1E-02 1) Oxygen:Dissolved:SBE mL/L 10 -99 () (-0.3E-01 1) $END !--1--- ---2---- --3-- --4--- ---5--- --6--- ---7---- -8-- !Pressu Temperat Trans Oxygen Fluores PAR Salinity Numb !re ure: missi : cence: :T0:C0 er_o ! Primary vity Dissol URU ~bin ! ved: _rec ! SBE ords !------ -------- ----- ------ ------- ------ -------- ---- *END OF HEADER 3.4 11.4101 41.2 6.80 1.618 87.5 31.2714 9 3.9 11.4077 41.6 6.82 1.929 85.4 31.2723 38 5.0 11.4000 41.8 6.85 2.183 71.7 31.2736 26 6.0 11.4012 42.8 6.88 2.401 57.4 31.2737 27 7.0 11.3733 42.7 6.91 2.410 45.7 31.2769 30 8.0 11.3613 42.2 6.90 2.507 37.6 31.2782 26 9.0 11.3670 42.4 6.89 2.042 32.0 31.2774 22 10.0 11.2708 42.2 6.87 2.184 26.7 31.2888 18 11.0 11.1042 42.6 6.84 2.384 22.3 31.3075 18 12.0 10.8420 42.5 6.79 2.882 18.7 31.3349 18 13.0 10.7296 42.1 6.76 3.514 15.9 31.3453 18 14.0 10.6004 41.5 6.76 4.056 13.4 31.3608 18 14.9 10.3662 41.5 6.72 3.258 11.3 31.3931 16 16.0 10.3677 42.0 6.69 3.059 9.5 31.3924 13 17.0 10.2270 42.2 6.66 3.637 8.1 31.4163 11 18.0 10.1049 42.5 6.64 4.033 6.9 31.4260 12 19.0 10.0624 42.7 6.62 2.968 5.9 31.4215 14 20.0 10.0482 42.8 6.60 3.276 5.0 31.4231 16 21.0 9.9429 43.2 6.60 3.595 4.3 31.4427 18 22.0 9.6422 43.0 6.60 3.376 3.7 31.4898 18 23.0 9.6014 43.4 6.59 3.337 3.2 31.4960 16 24.0 9.6149 42.0 6.57 3.771 2.8 31.5105 13 25.0 9.6041 41.5 6.55 4.530 2.5 31.5091 11 26.0 9.6000 42.8 6.53 4.242 2.1 31.5078 12 27.0 9.6429 42.8 6.51 4.123 1.9 31.5215 13 28.0 9.6643 42.6 6.49 3.904 1.6 31.5408 16 29.0 9.6352 41.3 6.48 3.844 1.5 31.5701 16 30.0 9.5696 42.0 6.45 3.461 1.3 31.5981 18 31.0 9.5084 42.4 6.39 3.182 1.2 31.6202 17 32.0 9.4724 42.6 6.32 2.889 1.1 31.6335 16 33.0 9.4404 42.9 6.25 2.714 1.0 31.6450 13 34.0 9.4191 42.9 6.20 2.692 0.9 31.6531 13 35.0 9.4101 43.3 6.14 2.974 0.8 31.6552 13 36.0 9.3325 43.6 6.08 2.886 0.8 31.6819 13 37.0 9.1711 43.8 6.00 2.940 0.8 31.7496 13 38.0 9.0602 44.8 5.92 2.393 0.7 31.7824 14 39.0 9.0264 45.8 5.85 2.102 0.7 31.7857 14 40.0 8.9706 46.6 5.78 2.029 0.7 31.7888 14 41.0 8.8833 47.0 5.71 1.586 0.7 31.8437 15 42.0 8.8022 48.2 5.66 1.527 0.6 31.9296 15 43.0 8.7353 40.0 5.60 1.302 0.6 32.0027 14 44.0 8.6915 44.2 5.55 1.294 0.6 32.0415 15 45.0 8.6703 49.9 5.50 0.934 0.6 32.0579 15 46.0 8.6592 51.6 5.46 1.046 0.6 32.0639 15 47.0 8.6337 52.3 5.43 0.785 0.6 32.0782 14 48.0 8.5877 52.5 5.39 0.715 0.6 32.1088 15 49.0 8.5619 51.3 5.35 0.949 0.6 32.1271 15 50.0 8.5309 52.1 5.32 0.693 0.6 32.1482 14 51.0 8.5178 52.6 5.28 0.670 0.6 32.1565 16 52.0 8.5093 51.4 5.25 0.656 0.6 32.1623 17 53.0 8.4723 49.0 5.22 0.922 0.6 32.1858 18 54.0 8.4388 52.5 5.21 0.671 0.6 32.2020 20 55.0 8.4114 53.1 5.19 0.716 0.6 32.2171 23 56.0 8.4047 52.7 5.18 0.733 0.6 32.2218 31