*2013/12/16 15:30:03.25 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : UTC 2004/05/08 02:44:55.000 TIME INCREMENT : 0 0 0 0.416667E-01 0 ! (day hr min sec ms) NUMBER OF RECORDS : 44 DATA DESCRIPTION : CTD FILE TYPE : ASCII NUMBER OF CHANNELS : 5 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- --------------------------- --------------- -------------- -------------- 1 Pressure decibar 3.283313 45.77478 2 Temperature:Primary 'deg C (ITS90)' 7.850043 9.9801 3 Fluorescence:URU:Seapoint mg/m^3 0.6688261 9.13625 4 Salinity:T0:C0 PSS-78 31.36746 33.05154 5 Number_of_bin_records n/a 16 32 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 8 F ' ' 3 4 -99 ' ' 9 F ' ' 4 5 -99 ' ' 5 I I 0 $END $REMARKS This file converted from Sea-Bird file: Q:\Cruise_Data\2004-07\CTD\derive\200 $END *ADMINISTRATION MISSION : 2004-07 AGENCY : IOS, Ocean Science and Productivity, Sidney, B.C. COUNTRY : Canada PROJECT : LaPerouse/Co-variability/ECOHAB/GURD/JdeF/SoG SCIENTIST : Juhasz T. PLATFORM : John P. Tully *LOCATION GEOGRAPHIC AREA : WCVI / SoG / JdeF STATION : JFD7 EVENT NUMBER : 79 LATITUDE : 48 11.81000 N ! (deg min) LONGITUDE : 123 59.90000 W ! (deg min) WATER DEPTH : 54 *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-911plus SERIAL NUMBER : 0585 $TABLE: SENSORS ! Name Abs Depth Serial No ! ------------------------- -------------- ---------- temperature:primary ' ' 2023 conductivity:primary ' ' 1763 pressure ' ' 77511 temperature:secondary ' ' 2095 conductivity:secondary ' ' 1764 Fluorometer ' ' Seapoint transmissometer:primary ' ' 333DR $END $REMARKS SOFTWARE VERSION SEASAVE WIN32 V 5.30A $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- SBE_IOS 2.7 2004/06/25 14:39:06 8231 8231 CLEAN 4.6.3 2004/06/29 14:54:41 8231 8231 SHIFTDAT 3.3 2004/06/29 15:00:16 ? ? SHIFTDAT 3.3 2004/06/29 15:01:20 ? ? DELETE 6.3 2004/06/29 15:01:39 8231 1216 CTDEDIT 4.50 2004/06/29 15:10:09 1216 1090 CALIB 11.4 2004/06/29 15:12:10 1090 1090 CALIB 11.4 2004/06/29 15:12:39 1090 1090 FILTERS 4.3 2004/06/29 15:13:15 1090 1090 BINAVE 4.0.1 2004/06/29 15:13:26 1090 44 REMOVECH 6.0 2004/06/29 15:15:58 44 44 HDREDIT2 2.2 2004/06/29 16:12:21 ? ? CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:30:03 44 44 $END $REMARKS -CLEAN functions: Interpolation by Channel 1: Scan_Number [n/a] in Pressure Set event to last 4 characters of file name -The following SHIFT parameters were used. Shift Channel: Conductivity:Primary # of Records to Advance (-ve for Delay): At REC# 0 Shift= -0.20 Salinity was recalculated after shift -The following SHIFT parameters were used. Shift Channel: Fluorescence:URU:Seapoint # of Records to Advance (-ve for Delay): At REC# 0 Shift= 36.00 Salinity was recalculated after shift -The following DELETE parameters were used: Surface Record Removal: Low Sal & Last Press Min Maximum Surface Pressure (relative): 10.00 Minimum Surface Salinity: 5.000 Surface Swell Pressure Tolerance: 1.00 Pressure filtered over width: 15 Swells deleted. Warning message if pressure difference of 2.00 Drop rates < 0.30m/s (calculated over 11 points) will be deleted. Drop rate applies in the range 10.00 to 36.47 dbars Sample interval (from FILE section of header) = 0.042 seconds. -The following CALIB parameters were used: Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = Q:\Cruise_Data\2004-07\CTD\doc\2004-07-recal1.ccf WARNING: No calibration done on file Q:\Cruise_Data\2004-07\CTD\ios\2004-07-007 -The following CALIB parameters were used: Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = Q:\Cruise_Data\2004-07\CTD\doc\2004-07-recal2.ccf WARNING: No calibration done on file Q:\Cruise_Data\2004-07\CTD\ios\2004-07-007 -The following FILTER parameters were used. Median filter was used. Filter width = 11 The following channel(s) were filtered. Fluorescence:URU:Seapoint -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 1.00 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CHANNEL(S) were removed from file. Scan_Number Temperature:Secondary Conductivity:Primary Conductivity:Secondary Transmissivity Status:Pump Descent_Rate Salinity:T1:C1 Flag -HEADER EDITS: Applied edit header: Q:\Cruise_Data\2004-07\CTD\doc\2004-07HDR-cast2.TXT Channel 1: Pressure [decibar] Units ==> dbar Format: F10.3 ==> F7.1 Channel 2: Temperature:Primary [deg C (ITS90)] (no changes) Channel 3: Fluorescence:URU:Seapoint [mg/m^3] (no changes) Channel 4: Salinity:T0:C0 [PSS-78] (no changes) Channel 5: Number_of_bin_records [n/a] Format: F5.0 ==> I5 Pad: ' ' ==> -99 $END *COMMENTS SBE HEADER Sea-Bird SBE 9 Data File: FileName = C:\DATA\2004-07\2004-07-0079.dat Software Version Seasave Win32 V 5.30a Temperature SN = 2023 Conductivity SN = 1763 Number of Bytes Per Scan = 24 Number of Voltage Words = 2 Number of Scans Averaged by the Deck Unit = 1 System UpLoad Time = Jun 08 2004 03:45:26 NMEA Latitude = 48 11.81 N NMEA Longitude = 123 59.90 W NMEA UTC (Time) = May 08 2004 02:44:55 Store Lat/Lon Data = Add to Header Only Ship: J.P. Tully Cruise: 2004-07 Station: JFD7 Depth: 54 # nquan = 13 # nvalues = 8231 # units = specified # name 0 = scan: Scan Count # name 1 = prDM: Pressure, Digiquartz [db] # name 2 = t090C: Temperature [ITS-90, deg C] # name 3 = t190C: Temperature, 2 [ITS-90, deg C] # name 4 = c0S/m: Conductivity [S/m] # name 5 = c1S/m: Conductivity, 2 [S/m] # name 6 = xmiss: Beam Transmission, Chelsea/Seatech/Wetlab CStar [%] # name 7 = flSP: Fluorescence, Seapoint # name 8 = pumps: Pump Status # name 9 = dz/dtM: Descent Rate [m/s] # name 10 = sal00: Salinity [PSU] # name 11 = sal11: Salinity, 2 [PSU] # name 12 = flag: flag # span 0 = 1, 8231 # span 1 = 1.820, 46.466 # span 2 = 7.8040, 10.8212 # span 3 = 7.8108, 10.3082 # span 4 = 3.377247, 3.475368 # span 5 = 3.420324, 3.474178 # span 6 = 46.7629, 73.8202 # span 7 = 5.0549e-01, 1.2176e+01 # span 8 = 0, 1 # span 9 = -1.106, 1.091 # span 10 = 29.9439, 33.1100 # span 11 = 31.3135, 33.1015 # span 12 = 0.0000e+00, 0.0000e+00 # interval = seconds: 0.0416667 # start_time = Jun 08 2004 03:45:26 # bad_flag = -9.990e-29 # sensor 0 = Frequency 0 temperature, primary, 2023, 20-Dec-03 # sensor 1 = Frequency 1 conductivity, primary, 1763, 19-Dec-03, cpcor = -9.57 00e-08 # sensor 2 = Frequency 2 pressure, 77511, 13-Mar-00 # sensor 3 = Frequency 3 temperature, secondary, 2095, 05-Sep-03 # sensor 4 = Frequency 4 conductivity, secondary, 1764, 05-Sep-03, cpcor = -9. 5700e-08 # sensor 5 = Extrnl Volt 0 Fluorometer, Seapoint, primary # sensor 6 = Extrnl Volt 2 transmissometer, primary, 333DR, 06-Jan-04 # datcnv_date = Jun 25 2004 14:28:58, 5.30a # datcnv_in = Q:\Cruise_Data\2004-07\CTD\2004-07-0079.dat Q:\Cruise_Data\2004-07 \CTD\2004-07-CTD5.CON # datcnv_skipover = 0 # wildedit_date = Jun 25 2004 14:36:36, 5.30a # wildedit_in = Q:\Cruise_Data\2004-07\CTD\convert\2004-07-0079.cnv # wildedit_pass1_nstd = 2.0 # wildedit_pass2_nstd = 5.0 # wildedit_pass2_mindelta = 0.000e+000 # wildedit_npoint = 50 # wildedit_vars = prDM # wildedit_excl_bad_scans = yes # celltm_date = Jun 25 2004 14:37:16, 5.30a # celltm_in = Q:\Cruise_Data\2004-07\CTD\wildedit\2004-07-0079.cnv # celltm_alpha = 0.0200, 0.0200 # celltm_tau = 7.0000, 7.0000 # celltm_temp_sensor_use_for_cond = primary, secondary # Derive_date = Jun 25 2004 14:38:06, 5.30a # Derive_in = Q:\Cruise_Data\2004-07\CTD\celltm\2004-07-0079.cnv Q:\Cruise_Data\ 2004-07\CTD\2004-07-CTD1.CON # file_type = ascii END* CTDEDIT was used to remove surface records to 3db and records corrupted by shed wakes from the bottom of the cast; salinity was cleaned lightly. The fluorescence and transmissivity data are nominal and unedited except that some records were removed in editing T and S. For casts #1 through #37 the transmissivity was bad or missing so the channel was removed from the files. The SBE dissolved oxygen data should be considered: • ±0.2ml/l from 0db–350db. • ±0.05ml/l below 350db – 1000db • unreliable below 1500db There was no NMEA data for this cast. The positions were taken from the log book and the time was estimated, based on the system upload time minus one hour, since an error of one hour was found in the log time for all other casts. ---------1----------- *CALIBRATION !--1--- ---2---- ---3--- ---4---- -5-- !Pressu Temperat Fluores Salinity Numb !re ure: cence: :T0:C0 er_o ! Primary URU: ~bin ! Seapoin _rec ! t ords !------ -------- ------- -------- ---- *END OF HEADER 3.3 9.9801 7.676 31.3675 16 4.0 9.7776 8.449 31.3912 31 5.0 9.6811 8.494 31.4090 27 6.0 9.6986 8.828 31.4071 26 7.0 9.6138 8.859 31.4206 28 8.0 9.5873 9.136 31.4324 24 9.0 9.5817 8.305 31.4512 22 10.0 9.5730 7.639 31.4589 22 11.0 9.5218 8.029 31.5137 24 12.0 9.4617 6.374 31.5594 24 13.0 9.4244 6.041 31.5819 23 14.0 9.4160 4.918 31.5908 25 15.0 9.3995 5.180 31.6079 27 16.0 9.3677 5.326 31.6349 25 17.0 9.3389 5.398 31.6569 23 18.0 9.3018 4.746 31.6885 22 19.0 9.2727 4.660 31.7225 23 20.0 9.2590 4.305 31.7404 24 21.0 9.1709 3.740 31.8195 23 22.0 8.9386 3.380 32.0209 24 23.0 8.8440 2.891 32.1139 27 24.0 8.8236 2.594 32.1324 27 25.0 8.8161 2.448 32.1386 25 26.0 8.7904 2.571 32.1584 23 27.0 8.7809 2.559 32.1646 23 28.0 8.7643 2.076 32.1764 24 29.0 8.7453 1.948 32.1901 23 30.0 8.6335 2.084 32.2898 24 31.0 8.4501 1.628 32.4546 24 32.0 8.3128 1.401 32.5781 26 33.0 8.2484 1.171 32.6370 27 34.0 8.2360 1.212 32.6486 25 35.0 8.2180 1.075 32.6665 25 36.0 8.2073 1.133 32.6773 23 37.0 8.2062 1.172 32.6783 23 38.0 8.1929 1.009 32.6920 23 39.0 8.1625 1.072 32.7239 24 40.0 8.1141 0.913 32.7747 25 41.0 8.0870 1.069 32.8019 27 42.0 8.1073 0.964 32.7802 28 43.0 8.1003 0.950 32.7873 27 44.0 8.0208 0.934 32.8738 29 45.0 7.9111 0.811 32.9905 32 45.8 7.8500 0.669 33.0515 23