*2013/12/16 15:29:33.03 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : UTC 2003/08/14 14:34:15.000 TIME INCREMENT : 0 0 0 0.5 0 ! (day hr min sec ms) NUMBER OF RECORDS : 37 DATA DESCRIPTION : CTD FILE TYPE : ASCII NUMBER OF CHANNELS : 5 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- -------------------------- --------------- -------------- -------------- 1 Pressure decibar 0.9803077 19.20912 2 Temperature:Primary 'deg C (ITS90)' 11.84987 15.27505 3 Fluorescence:URU:Wetlabs mg/m^3 0.573 5.229333 4 Salinity:T0:C0 PSS-78 28.92667 29.75885 5 Number_of_bin_records n/a 1 26 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 8 F ' ' 3 4 -99 ' ' 8 F ' ' 3 5 ' ' ' ' 5 I I 0 $END $REMARKS This file converted from Sea-Bird file: Q:\Cruise_Data\2003-40\derive\2003-40 $END *ADMINISTRATION MISSION : 2003-40 AGENCY : IOS, Ocean Science and Productivity, Sidney, B.C. COUNTRY : Canada PROJECT : Saanich Inlet Optical Measurements SCIENTIST : Pena A. PLATFORM : Squamish *LOCATION GEOGRAPHIC AREA : Saanich Inlet EVENT NUMBER : 24 LATITUDE : 48 38.93900 N ! (deg min) LONGITUDE : 123 29.69000 W ! (deg min) *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-19 SERIAL NUMBER : 1294 $TABLE: SENSORS ! Name Abs Depth Serial No ! ---- -------------- ---------- ' ' ' ' ' ' $END $REMARKS SOFTWARE VERSION 1.33 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- SBE_IOS 2.5 2003/09/27 15:27:52 687 687 CLEAN 4.4 2003/09/27 15:28:03 ? ? HDREDIT2 1.7 2003/09/27 15:28:11 ? ? DELETE 6.3 2003/09/27 15:30:29 682 153 CTDEDIT 4.50 2003/09/27 16:44:29 153 102 SHIFTDAT 3.3 2003/09/29 08:44:16 ? ? ADTIMCH 4.3 2003/11/03 09:59:16 102 102 BINAVE 4.0.1 2003/11/03 10:00:15 102 37 REMOVECH 6.0 2003/11/03 16:14:44 37 37 HDREDIT2 1.8 2003/11/03 16:32:24 ? ? HDREDIT2 2.1 2004/06/02 08:55:35 ? ? CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:29:33 37 37 $END $REMARKS CLEAN functions: - Set event to last 4 characters of file name -The following DELETE parameters were used: Surface Record Removal: Low Sal & Last Press Min Maximum Surface Pressure (relative): 10.00 Minimum Surface Salinity: 5.000 Surface Swell Pressure Tolerance: 1.00 Pressure NOT filtered. Swells deleted. Warning message if pressure difference of 2.00 Slow Drop Rate NOT deleted. -The following SHIFT parameters were used. Shift Channel: Fluorescence:URU:Wetlab # of Records to Advance (-ve for Delay): At REC# 0 Shift= 5.00 -The following ADTIMCH parameters were used. Add 7.00 hours to times in header file section -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 0.50 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CHANNEL(S) were removed from file. Scan_Number Conductivity:Primary Irradiance (PAR) Descent_Rate Flag $END *COMMENTS SBE HEADER Sea-Bird SBE19 Data File: FileName = C:\My Documents\Saanich\Aug 16\cast0024.hex Software Version 1.33 Temperature SN = 1294 Conductivity SN = 1294 System UpLoad Time = Aug 15 2003 20:41:47 Aug 14 Saanich Inlet ds SEACAT PROFILER V3.0c SN 1294 08/16/03 08:21:28.846 strain gauge pressure sensor: S/N = 163223, range = 1,000 psia, tc = -44 clk = 32768.008 iop = 160 vmain = 11.6 vlith = 5.3 mode = PROFILE ncasts = 27 sample rate = 1 scan every 0.5 seconds minimum raw conductivity frequency for pump turn on = 3000 hertz pump delay = 45 seconds samples = 8428 free = 49402 lwait = 0 msec SW1 = 90 battery cutoff = 7.2 volts number of voltages sampled = 2 logdata = NO S> dh cast 24 08/14 07:34:15 samples 6583 to 7269 sample rate = 1 scan every 0.5 seconds stop = switch off S> # nquan = 9 # nvalues = 687 # units = specified # name 0 = scan: Scan Count # name 1 = prSM: Pressure, Strain Gauge [db] # name 2 = t090C: Temperature [ITS-90, deg C] # name 3 = c0S/m: Conductivity [S/m] # name 4 = wetStar: Fluorescence, Wetlab Wetstar [mg/m^3] # name 5 = par: PAR/Irradiance, Biospherical/Licor # name 6 = dz/dtM: Descent Rate [m/s] # name 7 = sal00: Salinity [PSU] # name 8 = flag: flag # span 0 = 1, 687 # span 1 = 0.002, 20.904 # span 2 = 11.8119, 15.2978 # span 3 = 0.069183, 3.643476 # span 4 = -0.7460, 5.7983 # span 5 = 1.5000e+00, 1.4140e+03 # span 6 = -0.606, 0.910 # span 7 = 0.4224, 29.7733 # span 8 = 0.0000e+00, 0.0000e+00 # interval = seconds: 0.5 # start_time = Aug 14 2003 07:34:15 # bad_flag = -9.990e-29 # sensor 0 = Frequency 0 temperature, 1294, 22-Nov-02 # sensor 1 = Frequency 1 conductivity, 1294, 22-Nov-02, cpcor = -9.5700e-08 # sensor 2 = Extrnl Volt 0 WET Labs, WETStar fluorometer, WS3S-715P, 09-Feb-01 # sensor 3 = Extrnl Volt 1 irradiance (PAR), primary, 4565, 22-July-02 # sensor 4 = Pressure Voltage, 1294, 17-Jun-99 # datcnv_date = Sep 26 2003 16:58:07, 5.28c # datcnv_in = Q:\Cruise_Data\2003-40\hex-renamed\2003-40-0024.hex Q:\Cruise_Data \2003-40\1294-Nov02-FP.CON # datcnv_skipover = 0 # strip_date = Sep 26 2003 17:06:26, 5.28c # strip_in = Q:\Cruise_Data\2003-40\convert\2003-40-0024.cnv # filter_date = Sep 26 2003 17:08:01, 5.28c # filter_in = Q:\Cruise_Data\2003-40\filter\2003-40-0024.cnv # filter_low_pass_tc_A = 0.500 # filter_low_pass_tc_B = 2.000 # filter_low_pass_A_vars = c0S/m # filter_low_pass_B_vars = prSM # alignctd_date = Sep 27 2003 14:52:42, 5.28c # alignctd_in = Q:\Cruise_Data\2003-40\filter\2003-40-0024.cnv # alignctd_adv = t090C 2.500, c0S/m 1.500 # Derive_date = Sep 27 2003 14:53:05, 5.28c # Derive_in = Q:\Cruise_Data\2003-40\align\2003-40-0024.cnv Q:\Cruise_Data\2003- 40\1294-Nov02-FP.CON # file_type = ascii END* CTDEDIT was used to remove records from the top 0.8db and near the bottom of the cast and to clean salinity. There was no salinity calibration sampling and no history for this instrument since its last calibration, so no estimate can be made of those errors. Salinity for this cruise has been edited, but large errors likely remain. SeaCat salinity is prone to error due to mismatch of conductivity and temperature response times, especially when the descent rate is non-uniform. These errors are likely to be much larger than calibration errors. SeaCat salinity errors are normally expected to be as high as 0.05units in areas of high gradients. Since the descent rate was very low and unsteady, the error is probably significantly higher than that especially in the top 5db. !--1--- ---2---- ---3--- ---4--- -5-- !Pressu Temperat Fluores Salinit Numb !re ure: cence: y:T0:C0 er_o ! Primary URU: ~bin ! Wetlabs _rec ! ords !------ -------- ------- ------- ---- *END OF HEADER 1.0 15.2751 4.712 28.935 26 1.5 15.2587 4.806 28.930 5 1.9 14.8959 5.229 28.927 3 2.5 14.0240 4.848 29.039 3 3.0 13.5723 2.517 29.125 2 3.5 13.3877 1.840 29.207 2 4.0 13.2140 1.796 29.251 2 4.5 13.0442 1.576 29.269 2 5.1 12.8723 1.339 29.288 2 5.5 12.7381 1.136 29.326 1 5.9 12.6948 1.083 29.323 2 6.4 12.5926 1.057 29.356 2 7.0 12.5094 1.030 29.358 2 7.5 12.4155 0.961 29.382 2 8.0 12.3736 0.908 29.417 2 8.6 12.3202 0.863 29.456 2 9.1 12.2766 0.740 29.472 2 9.5 12.2404 0.732 29.483 1 9.9 12.1913 0.723 29.484 2 10.5 12.1754 0.697 29.488 2 11.0 12.1374 0.661 29.503 2 11.6 12.1308 0.661 29.515 2 12.0 12.1292 0.661 29.527 1 12.5 12.1284 0.653 29.541 2 13.1 12.1234 0.643 29.556 2 13.5 12.1177 0.661 29.563 1 13.9 12.0711 0.661 29.597 2 14.5 12.0480 0.600 29.615 2 15.1 12.0336 0.609 29.632 2 15.5 12.0137 0.661 29.650 1 16.0 11.9910 0.609 29.663 2 16.5 11.9658 0.609 29.677 1 17.0 11.9550 0.618 29.682 2 17.5 11.9277 0.573 29.706 1 18.0 11.9042 0.653 29.727 2 18.6 11.8860 0.653 29.740 2 19.2 11.8499 0.661 29.759 8