*2013/12/16 15:29:32.95 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : UTC 2003/08/11 14:19:42.000 TIME INCREMENT : 0 0 0 0.5 0 ! (day hr min sec ms) NUMBER OF RECORDS : 40 DATA DESCRIPTION : CTD FILE TYPE : ASCII NUMBER OF CHANNELS : 5 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- -------------------------- --------------- -------------- -------------- 1 Pressure decibar 0.7181111 20.04638 2 Temperature:Primary 'deg C (ITS90)' 11.4276 17.89717 3 Fluorescence:URU:Wetlabs mg/m^3 -0.459 5.851 4 Salinity:T0:C0 PSS-78 28.46333 29.56654 5 Number_of_bin_records n/a 2 27 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 8 F ' ' 3 4 -99 ' ' 8 F ' ' 3 5 ' ' ' ' 5 I I 0 $END $REMARKS This file converted from Sea-Bird file: Q:\Cruise_Data\2003-40\derive\2003-40 $END *ADMINISTRATION MISSION : 2003-40 AGENCY : IOS, Ocean Science and Productivity, Sidney, B.C. COUNTRY : Canada PROJECT : Saanich Inlet Optical Measurements SCIENTIST : Pena A. PLATFORM : Squamish *LOCATION GEOGRAPHIC AREA : Saanich Inlet EVENT NUMBER : 9 LATITUDE : 48 38.93900 N ! (deg min) LONGITUDE : 123 29.69000 W ! (deg min) *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-19 SERIAL NUMBER : 1294 $TABLE: SENSORS ! Name Abs Depth Serial No ! ---- -------------- ---------- ' ' ' ' ' ' $END $REMARKS SOFTWARE VERSION 1.33 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- SBE_IOS 2.5 2003/09/27 15:27:52 330 330 CLEAN 4.4 2003/09/27 15:28:03 ? ? HDREDIT2 1.7 2003/09/27 15:28:11 ? ? DELETE 6.3 2003/09/27 15:30:29 325 169 CTDEDIT 4.50 2003/09/27 16:35:57 169 153 SHIFTDAT 3.3 2003/09/29 08:44:16 ? ? ADTIMCH 4.3 2003/11/03 09:59:16 153 153 BINAVE 4.0.1 2003/11/03 10:00:15 153 40 REMOVECH 6.0 2003/11/03 16:14:43 40 40 HDREDIT2 1.8 2003/11/03 16:32:24 ? ? HDREDIT2 2.1 2004/06/02 08:55:28 ? ? CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:29:32 40 40 $END $REMARKS CLEAN functions: - Set event to last 4 characters of file name -The following DELETE parameters were used: Surface Record Removal: Low Sal & Last Press Min Maximum Surface Pressure (relative): 10.00 Minimum Surface Salinity: 5.000 Surface Swell Pressure Tolerance: 1.00 Pressure NOT filtered. Swells deleted. Warning message if pressure difference of 2.00 Slow Drop Rate NOT deleted. -The following SHIFT parameters were used. Shift Channel: Fluorescence:URU:Wetlab # of Records to Advance (-ve for Delay): At REC# 0 Shift= 5.00 -The following ADTIMCH parameters were used. Add 7.00 hours to times in header file section -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 0.50 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CHANNEL(S) were removed from file. Scan_Number Conductivity:Primary Irradiance (PAR) Descent_Rate Flag $END *COMMENTS SBE HEADER Sea-Bird SBE19 Data File: FileName = C:\My Documents\Saanich\cast 0009.hex Software Version 1.33 Temperature SN = 1294 Conductivity SN = 1294 System UpLoad Time = Aug 11 2003 23:55:31 cast 9 ds SEACAT PROFILER V3.0c SN 1294 08/12/03 11:42:24.459 strain gauge pressure sensor: S/N = 163223, range = 1,000 psia, tc = -44 clk = 32768.094 iop = 158 vmain = 11.3 vlith = 5.3 mode = PROFILE ncasts = 21 sample rate = 1 scan every 0.5 seconds minimum raw conductivity frequency for pump turn on = 10 hertz pump delay = 45 seconds samples = 5890 free = 51940 lwait = 0 msec SW1 = 90 battery cutoff = 7.2 volts number of voltages sampled = 4 logdata = NO S> dh cast 9 08/11 07:19:42 samples 3056 to 3400 sample rate = 1 scan every 0.5 seconds stop = switch off S> # nquan = 9 # nvalues = 330 # units = specified # name 0 = scan: Scan Count # name 1 = prSM: Pressure, Strain Gauge [db] # name 2 = t090C: Temperature [ITS-90, deg C] # name 3 = c0S/m: Conductivity [S/m] # name 4 = wetStar: Fluorescence, Wetlab Wetstar [mg/m^3] # name 5 = par: PAR/Irradiance, Biospherical/Licor # name 6 = dz/dtM: Descent Rate [m/s] # name 7 = sal00: Salinity [PSU] # name 8 = flag: flag # span 0 = 1, 330 # span 1 = 0.016, 20.998 # span 2 = 11.4232, 17.8989 # span 3 = 0.445814, 3.806357 # span 4 = -0.4646, 6.4492 # span 5 = 1.5000e+00, 1.5042e+00 # span 6 = -0.732, 0.571 # span 7 = 2.8767, 29.6003 # span 8 = 0.0000e+00, 0.0000e+00 # interval = seconds: 0.5 # start_time = Aug 11 2003 07:19:42 # bad_flag = -9.990e-29 # sensor 0 = Frequency 0 temperature, 1294, 22-Nov-02 # sensor 1 = Frequency 1 conductivity, 1294, 22-Nov-02, cpcor = -9.5700e-08 # sensor 2 = Extrnl Volt 0 WET Labs, WETStar fluorometer, WS3S-715P, 09-Feb-01 # sensor 3 = Extrnl Volt 3 irradiance (PAR), primary, 4565, 22-July-02 # sensor 4 = Pressure Voltage, 1294, 17-Jun-99 # datcnv_date = Sep 26 2003 16:57:11, 5.28c # datcnv_in = Q:\Cruise_Data\2003-40\hex-renamed\2003-40-0009.hex Q:\Cruise_Data \2003-40\1294-Nov02-FBBP.CON # datcnv_skipover = 0 # strip_date = Sep 26 2003 17:06:26, 5.28c # strip_in = Q:\Cruise_Data\2003-40\convert\2003-40-0009.cnv # filter_date = Sep 26 2003 17:08:01, 5.28c # filter_in = Q:\Cruise_Data\2003-40\filter\2003-40-0009.cnv # filter_low_pass_tc_A = 0.500 # filter_low_pass_tc_B = 2.000 # filter_low_pass_A_vars = c0S/m # filter_low_pass_B_vars = prSM # alignctd_date = Sep 27 2003 14:52:42, 5.28c # alignctd_in = Q:\Cruise_Data\2003-40\filter\2003-40-0009.cnv # alignctd_adv = t090C 2.500, c0S/m 1.500 # Derive_date = Sep 27 2003 14:53:05, 5.28c # Derive_in = Q:\Cruise_Data\2003-40\align\2003-40-0009.cnv Q:\Cruise_Data\2003- 40\1294-Nov02-FP.CON # file_type = ascii END* CTDEDIT was used to remove a few records from the top and bottom of the cast and to clean salinity heavily in the top 4db and lightly below that. There was no salinity calibration sampling and no history for this instrument since its last calibration, so no estimate can be made of those errors. Salinity for this cruise has been edited, but large errors likely remain. SeaCat salinity is prone to error due to mismatch of conductivity and temperature response times, especially when the descent rate is non-uniform. These errors are likely to be much larger than calibration errors. SeaCat salinity errors are normally expected to be as high as 0.05units in areas of high gradients. Since the descent rate was very low and unsteady, the error is probably significantly higher than that especially in the top 5db. !--1--- ---2---- ---3--- ---4--- -5-- !Pressu Temperat Fluores Salinit Numb !re ure: cence: y:T0:C0 er_o ! Primary URU: ~bin ! Wetlabs _rec ! ords !------ -------- ------- ------- ---- *END OF HEADER 0.7 17.8933 3.601 28.475 27 1.0 17.8947 3.618 28.473 22 1.5 17.8972 3.707 28.471 7 1.9 17.6544 3.951 28.465 6 2.5 16.9926 5.024 28.463 4 3.0 16.3676 5.851 28.463 3 3.5 15.8062 5.575 28.473 3 4.0 15.1957 3.640 28.535 3 4.5 14.7726 2.482 28.635 2 5.0 14.6331 1.224 28.674 3 5.5 14.4050 1.013 28.683 2 6.0 13.9359 0.550 28.685 3 6.5 13.6557 0.213 28.716 2 7.0 13.4172 0.092 28.790 3 7.5 13.2592 -0.043 28.839 2 8.0 13.2280 -0.095 28.856 2 8.4 13.1926 -0.112 28.883 2 9.0 13.1368 -0.142 28.924 3 9.5 13.0809 -0.148 28.945 2 9.9 12.9967 -0.016 28.978 2 10.5 12.9038 -0.148 29.041 3 11.0 12.7971 -0.228 29.114 2 11.5 12.6969 -0.289 29.149 2 11.9 12.6131 -0.298 29.177 2 12.5 12.4673 -0.312 29.231 3 13.1 12.3309 -0.315 29.279 2 13.6 12.2634 -0.332 29.314 2 14.0 12.2087 -0.227 29.345 2 14.5 12.1794 -0.350 29.373 2 15.0 12.1164 -0.332 29.400 2 15.4 11.9689 -0.332 29.410 2 15.9 11.8394 -0.395 29.406 2 16.4 11.7802 -0.403 29.417 2 16.9 11.7246 -0.403 29.435 2 17.4 11.6544 -0.420 29.453 2 17.9 11.5809 -0.438 29.470 2 18.5 11.5111 -0.459 29.491 3 19.1 11.4444 -0.438 29.512 2 19.6 11.4276 -0.424 29.533 3 20.0 11.4307 -0.443 29.566 8