*2013/12/16 15:29:32.94 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : UTC 2003/08/09 14:39:57.000 TIME INCREMENT : 0 0 0 0.5 0 ! (day hr min sec ms) NUMBER OF RECORDS : 40 DATA DESCRIPTION : CTD FILE TYPE : ASCII NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- --------------- -------------- -------------- 1 Pressure decibar 1.085615 20.5608 2 Temperature:Primary 'deg C (ITS90)' 11.43767 17.89318 3 Salinity:T0:C0 PSS-78 28.47418 29.5621 4 Number_of_bin_records n/a 1 13 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 8 F ' ' 3 4 ' ' ' ' 5 I I 0 $END $REMARKS This file converted from Sea-Bird file: Q:\Cruise_Data\2003-40\derive\2003-40 $END *ADMINISTRATION MISSION : 2003-40 AGENCY : IOS, Ocean Science and Productivity, Sidney, B.C. COUNTRY : Canada PROJECT : Saanich Inlet Optical Measurements SCIENTIST : Pena A. PLATFORM : Squamish *LOCATION GEOGRAPHIC AREA : Saanich Inlet EVENT NUMBER : 8 LATITUDE : 48 38.93900 N ! (deg min) LONGITUDE : 123 29.69000 W ! (deg min) *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-19 SERIAL NUMBER : 1294 $TABLE: SENSORS ! Name Abs Depth Serial No ! ---- -------------- ---------- ' ' ' ' ' ' $END $REMARKS SOFTWARE VERSION 1.33 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- SBE_IOS 2.5 2003/09/27 15:27:52 712 712 CLEAN 4.4 2003/09/27 15:28:03 ? ? HDREDIT2 1.7 2003/09/27 15:28:11 ? ? DELETE 6.3 2003/09/27 15:30:29 707 143 CTDEDIT 4.50 2003/09/27 16:31:51 143 105 SHIFTDAT 3.3 2003/09/29 08:44:16 ? ? ADTIMCH 4.3 2003/11/03 09:59:16 105 105 BINAVE 4.0.1 2003/11/03 10:00:15 105 40 REMOVECH 6.0 2003/11/03 16:14:50 40 40 HDREDIT2 1.8 2003/11/03 16:32:24 ? ? CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:29:32 40 40 $END $REMARKS CLEAN functions: - Set event to last 4 characters of file name -The following DELETE parameters were used: Surface Record Removal: Low Sal & Last Press Min Maximum Surface Pressure (relative): 10.00 Minimum Surface Salinity: 5.000 Surface Swell Pressure Tolerance: 1.00 Pressure NOT filtered. Swells deleted. Warning message if pressure difference of 2.00 Slow Drop Rate NOT deleted. -The following SHIFT parameters were used. Shift Channel: Fluorescence:URU:Wetlab # of Records to Advance (-ve for Delay): At REC# 0 Shift= 5.00 -The following ADTIMCH parameters were used. Add 7.00 hours to times in header file section -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 0.50 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CHANNEL(S) were removed from file. Scan_Number Conductivity:Primary Fluorescence:URU:Wetlab Irradiance (PAR) Descent_Rate Flag $END *COMMENTS SBE HEADER Sea-Bird SBE19 Data File: FileName = C:\My Documents\Saanich\cast 0008.hex Software Version 1.33 Temperature SN = 1294 Conductivity SN = 1294 System UpLoad Time = Aug 11 2003 23:54:59 cast 8 ds SEACAT PROFILER V3.0c SN 1294 08/12/03 11:42:24.459 strain gauge pressure sensor: S/N = 163223, range = 1,000 psia, tc = -44 clk = 32768.094 iop = 158 vmain = 11.3 vlith = 5.3 mode = PROFILE ncasts = 21 sample rate = 1 scan every 0.5 seconds minimum raw conductivity frequency for pump turn on = 10 hertz pump delay = 45 seconds samples = 5890 free = 51940 lwait = 0 msec SW1 = 90 battery cutoff = 7.2 volts number of voltages sampled = 4 logdata = NO S> dh cast 8 08/09 07:39:57 samples 2341 to 3055 sample rate = 1 scan every 0.5 seconds stop = switch off S> # nquan = 9 # nvalues = 712 # units = specified # name 0 = scan: Scan Count # name 1 = prSM: Pressure, Strain Gauge [db] # name 2 = t090C: Temperature [ITS-90, deg C] # name 3 = c0S/m: Conductivity [S/m] # name 4 = wetStar: Fluorescence, Wetlab Wetstar [mg/m^3] # name 5 = par: PAR/Irradiance, Biospherical/Licor # name 6 = dz/dtM: Descent Rate [m/s] # name 7 = sal00: Salinity [PSU] # name 8 = flag: flag # span 0 = 1, 712 # span 1 = -0.061, 20.857 # span 2 = 11.4112, 24.4339 # span 3 = 0.083736, 3.813368 # span 4 = -0.7636, 71.2764 # span 5 = 1.5000e+00, 3.8905e+02 # span 6 = -0.660, 1.035 # span 7 = 0.4214, 29.5975 # span 8 = 0.0000e+00, 0.0000e+00 # interval = seconds: 0.5 # start_time = Aug 09 2003 07:39:57 # bad_flag = -9.990e-29 # sensor 0 = Frequency 0 temperature, 1294, 22-Nov-02 # sensor 1 = Frequency 1 conductivity, 1294, 22-Nov-02, cpcor = -9.5700e-08 # sensor 2 = Extrnl Volt 0 WET Labs, WETStar fluorometer, WS3S-715P, 09-Feb-01 # sensor 3 = Extrnl Volt 3 irradiance (PAR), primary, 4565, 22-July-02 # sensor 4 = Pressure Voltage, 1294, 17-Jun-99 # datcnv_date = Sep 26 2003 16:57:11, 5.28c # datcnv_in = Q:\Cruise_Data\2003-40\hex-renamed\2003-40-0008.hex Q:\Cruise_Data \2003-40\1294-Nov02-FBBP.CON # datcnv_skipover = 0 # strip_date = Sep 26 2003 17:06:26, 5.28c # strip_in = Q:\Cruise_Data\2003-40\convert\2003-40-0008.cnv # filter_date = Sep 26 2003 17:08:00, 5.28c # filter_in = Q:\Cruise_Data\2003-40\filter\2003-40-0008.cnv # filter_low_pass_tc_A = 0.500 # filter_low_pass_tc_B = 2.000 # filter_low_pass_A_vars = c0S/m # filter_low_pass_B_vars = prSM # alignctd_date = Sep 27 2003 14:52:42, 5.28c # alignctd_in = Q:\Cruise_Data\2003-40\filter\2003-40-0008.cnv # alignctd_adv = t090C 2.500, c0S/m 1.500 # Derive_date = Sep 27 2003 14:53:05, 5.28c # Derive_in = Q:\Cruise_Data\2003-40\align\2003-40-0008.cnv Q:\Cruise_Data\2003- 40\1294-Nov02-FP.CON # file_type = ascii END* CTDEDIT was used to remove records from the top 0.8db and near the bottom of the cast and to clean salinity heavily in the top 3db and lightly below that. There was no salinity calibration sampling and no history for this instrument since its last calibration, so no estimate can be made of those errors. Salinity for this cruise has been edited, but large errors likely remain. SeaCat salinity is prone to error due to mismatch of conductivity and temperature response times, especially when the descent rate is non-uniform. These errors are likely to be much larger than calibration errors. SeaCat salinity errors are normally expected to be as high as 0.05units in areas of high gradients. Since the descent rate was very low and unsteady, the error is probably significantly higher than that especially in the top 5db. !--1--- ---2---- ---3--- -4-- !Pressu Temperat Salinit Numb !re ure: y:T0:C0 er_o ! Primary ~bin ! _rec ! ords !------ -------- ------- ---- *END OF HEADER 1.1 17.8932 28.492 13 1.4 17.7655 28.474 9 2.0 16.8569 28.486 3 2.6 16.0541 28.513 3 3.1 15.3062 28.539 2 3.5 14.9431 28.579 2 4.0 14.7446 28.632 2 4.4 14.5855 28.649 2 4.9 14.2398 28.646 2 5.4 13.8371 28.645 2 5.9 13.6091 28.715 2 6.5 13.4177 28.778 2 7.1 13.3051 28.817 2 7.5 13.2431 28.860 1 7.9 13.1736 28.908 2 8.5 13.0912 28.951 2 9.0 13.0082 28.984 2 9.6 12.9263 29.030 2 10.0 12.8460 29.097 1 10.4 12.7591 29.144 2 11.0 12.6528 29.187 2 11.6 12.5676 29.212 2 12.0 12.4959 29.235 1 12.4 12.3860 29.281 2 13.0 12.2967 29.317 2 13.6 12.2392 29.344 2 14.0 12.1967 29.358 1 14.4 12.1828 29.369 2 15.1 11.9239 29.421 2 15.5 11.8415 29.433 1 16.0 11.8100 29.434 2 16.5 11.7768 29.429 1 17.0 11.7379 29.440 2 17.5 11.6985 29.443 2 18.0 11.6291 29.458 2 18.5 11.5423 29.494 3 19.0 11.4772 29.517 2 19.5 11.4377 29.539 3 20.0 11.4408 29.562 3 20.6 11.4578 29.558 10