*2013/12/16 15:29:32.92 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : UTC 2003/08/08 14:29:28.000 TIME INCREMENT : 0 0 0 0.5 0 ! (day hr min sec ms) NUMBER OF RECORDS : 38 DATA DESCRIPTION : CTD FILE TYPE : ASCII NUMBER OF CHANNELS : 5 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- --------------- -------------- -------------- 1 Pressure decibar 1.1004 19.648 2 Temperature:Primary 'deg C (ITS90)' 12.0992 16.95344 3 Salinity:T0:C0 PSS-78 28.4224 29.45658 4 Salinity:T0:C0 PSS-78 28.45683 29.47324 5 Number_of_bin_records n/a 1 10 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 8 F ' ' 3 4 -99 ' ' 9 F ' ' 4 5 ' ' ' ' 5 I I 0 $END $REMARKS This file converted from Sea-Bird file: Q:\Cruise_Data\2003-40\derive\2003-40 $END *ADMINISTRATION MISSION : 2003-40 AGENCY : IOS, Ocean Science and Productivity, Sidney, B.C. COUNTRY : Canada PROJECT : Saanich Inlet Optical Measurements SCIENTIST : Pena A. PLATFORM : Squamish *LOCATION GEOGRAPHIC AREA : Saanich Inlet EVENT NUMBER : 6 LATITUDE : 48 38.93900 N ! (deg min) LONGITUDE : 123 29.69000 W ! (deg min) *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-19 SERIAL NUMBER : 1294 $TABLE: SENSORS ! Name Abs Depth Serial No ! ---- -------------- ---------- ' ' ' ' ' ' $END $REMARKS SOFTWARE VERSION 1.33 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- SBE_IOS 2.6 2003/10/02 11:10:13 367 367 CLEAN 4.4 2003/10/02 11:11:02 ? ? DELETE 6.3 2003/10/02 11:11:42 362 126 CTDEDIT 4.50 2003/10/02 11:15:55 126 91 SHIFTDAT 3.3 2003/10/02 11:16:39 ? ? ADTIMCH 4.3 2003/11/03 09:59:16 91 91 BINAVE 4.0.1 2003/11/03 10:00:15 91 38 REMOVECH 6.0 2003/11/03 16:14:49 38 38 HDREDIT2 1.8 2003/11/03 16:32:24 ? ? CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:29:32 38 38 $END $REMARKS CLEAN functions: - Set event to last 4 characters of file name -The following DELETE parameters were used: Surface Record Removal: Low Sal & Last Press Min Maximum Surface Pressure (relative): 10.00 Minimum Surface Salinity: 5.000 Surface Swell Pressure Tolerance: 1.00 Pressure NOT filtered. Swells deleted. Warning message if pressure difference of 2.00 Slow Drop Rate NOT deleted. -The following SHIFT parameters were used. Shift Channel: Fluorescence:URU:Wetlab # of Records to Advance (-ve for Delay): At REC# 0 Shift= 5.00 -The following ADTIMCH parameters were used. Add 7.00 hours to times in header file section -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 0.50 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CHANNEL(S) were removed from file. Scan_Number Conductivity:Primary Fluorescence:URU:Wetlab Irradiance (PAR) Descent_Rate Flag $END *COMMENTS SBE HEADER Sea-Bird SBE19 Data File: FileName = C:\My Documents\Saanich\Saanich5.hex Software Version 1.33 Temperature SN = 1294 Conductivity SN = 1294 System UpLoad Time = Aug 08 2003 08:05:30 Saanich Inlet, Aug 8, 2003 ds SEACAT PROFILER V3.0c SN 1294 08/08/03 07:56:58.395 strain gauge pressure sensor: S/N = 163223, range = 1,000 psia, tc = -44 clk = 32768.000 iop = 161 vmain = 11.5 vlith = 5.3 mode = PROFILE ncasts = 1 sample rate = 1 scan every 0.5 seconds minimum raw conductivity frequency for pump turn on = 10 hertz pump delay = 45 seconds samples = 651 free = 42721 lwait = 0 msec SW1 = 90 battery cutoff = 7.2 volts number of voltages sampled = 4 logdata = NO * S> dh cast 0 08/08 07:29:28 samples 0 to 650 sample rate = 1 scan every 0.5 seco nds stop = switch off S> # nquan = 10 # nvalues = 367 # units = specified # name 0 = scan: Scan Count # name 1 = prSM: Pressure, Strain Gauge [db] # name 2 = t090C: Temperature [ITS-90, deg C] # name 3 = sal00: Salinity [PSU] # name 4 = c0S/m: Conductivity [S/m] # name 5 = wetStar: Fluorescence, Wetlab Wetstar [mg/m^3] # name 6 = par: PAR/Irradiance, Biospherical/Licor # name 7 = dz/dtM: Descent Rate [m/s] # name 8 = sal00: Salinity [PSU] # name 9 = flag: flag # span 0 = 285, 651 # span 1 = 0.023, 20.965 # span 2 = 12.0883, 16.9602 # span 3 = 1.2720, 29.4895 # span 4 = 0.204675, 3.726561 # span 5 = -0.7636, -0.7636 # span 6 = 1.5000e+00, 1.5042e+00 # span 7 = -0.714, 0.714 # span 8 = 1.2761, 29.4842 # span 9 = 0.0000e+00, 0.0000e+00 # interval = seconds: 0.5 # start_time = Aug 08 2003 07:29:28 # bad_flag = -9.990e-29 # sensor 0 = Frequency 0 temperature, 1294, 22-Nov-02 # sensor 1 = Frequency 1 conductivity, 1294, 22-Nov-02, cpcor = -9.5700e-08 # sensor 2 = Extrnl Volt 0 WET Labs, WETStar fluorometer, WS3S-715P, 09-Feb-01 # sensor 3 = Extrnl Volt 1 irradiance (PAR), primary, 4565, 22-July-02 # sensor 4 = Pressure Voltage, 1294, 17-Jun-99 # datcnv_date = Sep 29 2003 14:11:32, 5.28c # datcnv_in = Q:\Cruise_Data\2003-40\hex-renamed\2003-40-0006.hex Q:\Cruise_Data \2003-40\1294-Nov02-FP.CON # datcnv_skipover = 0 # filter_date = Sep 29 2003 14:27:13, 5.28c # filter_in = Q:\Cruise_Data\2003-40\convert\2003-40-9906.cnv # filter_low_pass_tc_A = 0.500 # filter_low_pass_tc_B = 2.000 # filter_low_pass_A_vars = sal00 c0S/m # filter_low_pass_B_vars = prSM # alignctd_date = Sep 29 2003 14:27:32, 5.28c # alignctd_in = Q:\Cruise_Data\2003-40\filter\2003-40-9906.cnv # alignctd_adv = t090C 2.500, c0S/m 1.200 # Derive_date = Sep 29 2003 14:27:52, 5.28c # Derive_in = Q:\Cruise_Data\2003-40\align\2003-40-9906.cnv Q:\Cruise_Data\2003- 40\1294-Nov02-FP.CON # file_type = ascii END* A text editor was used to remove 284 records from the beginning of the cast; these were from an initial partial downcast before the full cast. CTDEDIT was used to remove a few records from the top and bottom of the cast and to clean salinity. There was no salinity calibration sampling and no history for this instrument since its last calibration, so no estimate can be made of those errors. Salinity for this cruise has been edited, but large errors likely remain. SeaCat salinity is prone to error due to mismatch of conductivity and temperature response times, especially when the descent rate is non-uniform. These errors are likely to be much larger than calibration errors. SeaCat salinity errors are normally expected to be as high as 0.05units in areas of high gradients. Since the descent rate was very low and unsteady, the error is probably significantly higher than that especially in the top 5db. !--1--- ---2---- ---3--- ---4---- -5-- !Pressu Temperat Salinit Salinity Numb !re ure: y:T0:C0 :T0:C0 er_o ! Primary ~bin ! _rec ! ords !------ -------- ------- -------- ---- *END OF HEADER 1.1 16.9534 28.458 28.4568 10 1.5 16.9519 28.462 28.4660 4 2.0 16.7404 28.464 28.5885 4 2.5 16.4048 28.468 28.6884 2 3.0 16.0238 28.457 28.6909 3 3.5 15.5670 28.437 28.7463 2 4.0 15.1758 28.427 28.7404 3 4.5 14.6418 28.430 28.8138 2 5.0 14.2915 28.422 28.7868 2 5.5 13.9967 28.432 28.7794 2 6.1 13.7538 28.464 28.7927 2 6.5 13.6541 28.506 28.7738 1 6.9 13.5715 28.559 28.7789 2 7.5 13.4297 28.634 28.8374 2 8.1 13.3014 28.695 28.8943 2 8.5 13.2411 28.734 28.9211 1 9.0 13.2054 28.785 28.9349 2 9.6 13.1592 28.857 28.9482 2 10.0 13.1064 28.889 28.9691 1 10.4 13.0357 28.902 28.9958 2 11.0 12.9600 28.916 29.0112 2 11.5 12.9344 28.931 29.0147 2 12.1 12.9071 28.964 29.0536 2 12.6 12.8631 29.014 29.1112 2 13.0 12.7341 29.057 29.2008 1 13.4 12.6082 29.080 29.2474 2 14.0 12.4927 29.093 29.2670 2 14.5 12.4205 29.103 29.2951 1 15.0 12.3696 29.155 29.3172 2 15.5 12.3260 29.204 29.3373 1 16.0 12.2981 29.248 29.3454 2 16.6 12.2631 29.289 29.3556 2 17.1 12.2010 29.309 29.3892 1 17.5 12.1454 29.322 29.4083 2 18.1 12.1038 29.330 29.4165 2 18.6 12.1012 29.354 29.4198 2 19.0 12.0992 29.396 29.4387 2 19.6 12.1244 29.457 29.4732 10