*2013/12/16 15:29:32.89 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : UTC 2003/08/07 15:04:00.000 TIME INCREMENT : 0 0 0 0.5 0 ! (day hr min sec ms) NUMBER OF RECORDS : 40 DATA DESCRIPTION : CTD FILE TYPE : ASCII NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- --------------- -------------- -------------- 1 Pressure decibar 0.9745556 20.275 2 Temperature:Primary 'deg C (ITS90)' 12.5249 17.64741 3 Salinity:T0:C0 PSS-78 28.3835 29.2122 4 Number_of_bin_records n/a 1 9 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 8 F ' ' 3 4 ' ' ' ' 5 I I 0 $END $REMARKS This file converted from Sea-Bird file: Q:\Cruise_Data\2003-40\derive\2003-40 $END *ADMINISTRATION MISSION : 2003-40 AGENCY : IOS, Ocean Science and Productivity, Sidney, B.C. COUNTRY : Canada PROJECT : Saanich Inlet Optical Measurements SCIENTIST : Pena A. PLATFORM : Squamish *LOCATION GEOGRAPHIC AREA : Saanich Inlet EVENT NUMBER : 5 LATITUDE : 48 38.73700 N ! (deg min) LONGITUDE : 123 29.75200 W ! (deg min) *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-19 SERIAL NUMBER : 1294 $TABLE: SENSORS ! Name Abs Depth Serial No ! ---- -------------- ---------- ' ' ' ' ' ' $END $REMARKS SOFTWARE VERSION 1.33 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- SBE_IOS 2.5 2003/09/27 15:27:52 533 533 CLEAN 4.4 2003/09/27 15:28:03 ? ? HDREDIT2 1.7 2003/09/27 15:28:11 ? ? DELETE 6.3 2003/09/27 15:30:29 528 169 CTDEDIT 4.50 2003/09/27 16:23:06 169 135 SHIFTDAT 3.3 2003/09/29 08:44:16 ? ? ADTIMCH 4.3 2003/11/03 09:59:16 135 135 BINAVE 4.0.1 2003/11/03 10:00:15 135 40 REMOVECH 6.0 2003/11/03 16:14:49 40 40 HDREDIT2 1.8 2003/11/03 16:32:24 ? ? CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:29:32 40 40 $END $REMARKS CLEAN functions: - Set event to last 4 characters of file name -The following DELETE parameters were used: Surface Record Removal: Low Sal & Last Press Min Maximum Surface Pressure (relative): 10.00 Minimum Surface Salinity: 5.000 Surface Swell Pressure Tolerance: 1.00 Pressure NOT filtered. Swells deleted. Warning message if pressure difference of 2.00 Slow Drop Rate NOT deleted. -The following SHIFT parameters were used. Shift Channel: Fluorescence:URU:Wetlab # of Records to Advance (-ve for Delay): At REC# 0 Shift= 5.00 -The following ADTIMCH parameters were used. Add 7.00 hours to times in header file section -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 0.50 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CHANNEL(S) were removed from file. Scan_Number Conductivity:Primary Fluorescence:URU:Wetlab Irradiance (PAR) Descent_Rate Flag $END *COMMENTS SBE HEADER Sea-Bird SBE19 Data File: FileName = C:\DATA\1294-017.hex Software Version 1.33 Temperature SN = 1294 Conductivity SN = 1294 System UpLoad Time = Aug 07 2003 16:01:25 Cast 17 ds SEACAT PROFILER V3.0c SN 1294 08/07/03 16:00:18.040 strain gauge pressure sensor: S/N = 163223, range = 1,000 psia, tc = -44 clk = 32768.070 iop = 159 vmain = 11.4 vlith = 5.4 mode = PROFILE ncasts = 18 sample rate = 1 scan every 0.5 seconds minimum raw conductivity frequency for pump turn on = 10 hertz pump delay = 45 seconds samples = 7538 free = 35834 lwait = 0 msec SW1 = 90 battery cutoff = 7.2 volts number of voltages sampled = 2 logdata = NO S> cast 0 07/14 14:52:06 samples 0 to 48 sample rate = 1 scan every 0.5 secon ds stop = switch off cast 1 07/16 08:08:27 samples 49 to 89 sample rate = 1 scan every 0.5 seco nds stop = switch off cast 2 07/16 10:39:38 samples 90 to 127 sample rate = 1 scan every 0.5 sec onds stop = switch off cast 3 07/17 08:00:18 samples 128 to 1017 sample rate = 1 scan every 0.5 s econds stop = switch off cast 4 07/17 08:07:53 samples 1018 to 1652 sample rate = 1 scan every 0.5 seconds stop = switch off cast 5 08/05 15:40:26 samples 1653 to 1694 sample rate = 1 scan every 0.5 seconds stop = switch off cast 6 08/05 15:42:32 samples 1695 to 1756 sample rate = 1 scan every 0.5 seconds stop = switch off cast 7 08/06 08:31:56 samples 1757 to 2751 sample rate = 1 scan every 0.5 seconds stop = switch off cast 8 08/06 15:53:24 samples 2752 to 2849 sample rate = 1 scan every 0.5 seconds stop = switch off cast 9 08/06 16:17:45 samples 2850 to 2888 sample rate = 1 scan every 0.5 seconds stop = switch off cast 10 08/06 16:23:10 samples 2889 to 2921 sample rate = 1 scan every 0.5 seconds stop = switch off cast 11 08/06 16:28:37 samples 2922 to 3059 sample rate = 1 scan every 0.5 seconds stop = switch off cast 12 08/06 16:30:55 samples 3060 to 3180 sample rate = 1 scan every 0.5 seconds stop = switch off cast 13 08/06 16:34:18 samples 3181 to 3388 sample rate = 1 scan every 0.5 seconds stop = switch off cast 14 08/07 07:26:55 samples 3389 to 3389 sample rate = 1 scan every 0.5 seconds stop = switch off cast 15 08/07 07:28:06 samples 3389 to 3675 sample rate = 1 scan every 0.5 seconds stop = switch off cast 16 08/07 08:04:11 samples 3676 to 7384 sample rate = 1 scan every 0.5 seconds stop = recv cmd cast 17 08/07 15:50:13 samples 7385 to 7537 sample rate = 1 scan every 0.5 seconds stop = switch off S> # nquan = 9 # nvalues = 533 # units = specified # name 0 = scan: Scan Count # name 1 = prSM: Pressure, Strain Gauge [db] # name 2 = t090C: Temperature [ITS-90, deg C] # name 3 = c0S/m: Conductivity [S/m] # name 4 = wetStar: Fluorescence, Wetlab Wetstar [mg/m^3] # name 5 = par: PAR/Irradiance, Biospherical/Licor # name 6 = dz/dtM: Descent Rate [m/s] # name 7 = sal00: Salinity [PSU] # name 8 = flag: flag # span 0 = 3838, 4370 # span 1 = 0.194, 20.925 # span 2 = 12.4602, 17.7038 # span 3 = 3.438970, 3.781492 # span 4 = -0.7636, 0.0808 # span 5 = 1.5000e+00, 1.7957e+03 # span 6 = -0.571, 0.856 # span 7 = 25.8776, 29.2301 # span 8 = 0.0000e+00, 0.0000e+00 # interval = seconds: 0.5 # start_time = Jul 14 2003 14:52:06 # bad_flag = -9.990e-29 # sensor 0 = Frequency 0 temperature, 1294, 22-Nov-02 # sensor 1 = Frequency 1 conductivity, 1294, 22-Nov-02, cpcor = -9.5700e-08 # sensor 2 = Extrnl Volt 0 WET Labs, WETStar fluorometer, WS3S-715P, 09-Feb-01 # sensor 3 = Extrnl Volt 3 irradiance (PAR), primary, 4565, 22-July-02 # sensor 4 = Pressure Voltage, 1294, 17-Jun-99 # datcnv_date = Sep 26 2003 16:57:08, 5.28c # datcnv_in = Q:\Cruise_Data\2003-40\hex-renamed\2003-40-0003-0004-0005.hex Q:\C ruise_Data\2003-40\1294-Nov02-FBBP.CON # datcnv_skipover = 0 # Section_date = Sep 26 2003 16:59:59, 5.28c # Section_in = Q:\Cruise_Data\2003-40\convert\2003-40-0003-0004-0005.cnv # section_type = Scan Number # section_range = 3838.0, 4370.0 # strip_date = Sep 26 2003 17:06:26, 5.28c # strip_in = Q:\Cruise_Data\2003-40\convert\2003-40-0005.cnv # filter_date = Sep 26 2003 17:08:00, 5.28c # filter_in = Q:\Cruise_Data\2003-40\filter\2003-40-0005.cnv # filter_low_pass_tc_A = 0.500 # filter_low_pass_tc_B = 2.000 # filter_low_pass_A_vars = c0S/m # filter_low_pass_B_vars = prSM # alignctd_date = Sep 27 2003 14:52:42, 5.28c # alignctd_in = Q:\Cruise_Data\2003-40\filter\2003-40-0005.cnv # alignctd_adv = t090C 2.500, c0S/m 1.500 # Derive_date = Sep 27 2003 14:52:59, 5.28c # Derive_in = Q:\Cruise_Data\2003-40\align\2003-40-0005.cnv Q:\Cruise_Data\2003- 40\1294-Nov02-FP.CON # file_type = ascii END* CTDEDIT was used to remove records from teh top 0.8db and near the bottom of hte cast and to clean salinity mostly in the top 4db and lightly below that. There was no salinity calibration sampling and no history for this instrument since its last calibration, so no estimate can be made of those errors. Salinity for this cruise has been edited, but large errors likely remain. SeaCat salinity is prone to error due to mismatch of conductivity and temperature response times, especially when the descent rate is non-uniform. These errors are likely to be much larger than calibration errors. SeaCat salinity errors are normally expected to be as high as 0.05units in areas of high gradients. Since the descent rate was very low and unsteady, the error is probably significantly higher than that especially in the top 5db. !--1--- ---2---- ---3--- -4-- !Pressu Temperat Salinit Numb !re ure: y:T0:C0 er_o ! Primary ~bin ! _rec ! ords !------ -------- ------- ---- *END OF HEADER 1.0 17.6474 28.389 9 1.5 17.6142 28.385 4 2.0 17.5557 28.383 2 2.5 17.4028 28.386 3 3.1 16.1656 28.418 2 3.5 15.5740 28.425 1 4.0 15.3783 28.449 2 4.5 15.1222 28.500 2 5.1 14.9620 28.541 2 5.6 14.7491 28.616 2 6.0 14.5812 28.660 2 6.5 14.4756 28.682 3 7.0 14.4011 28.703 2 7.5 14.3536 28.710 4 8.0 14.3447 28.703 4 8.5 14.2215 28.666 5 9.0 14.0103 28.642 4 9.5 13.7783 28.660 4 10.0 13.5889 28.703 4 10.5 13.3822 28.763 3 11.0 13.2948 28.819 4 11.5 13.2599 28.852 3 12.0 13.2058 28.891 4 12.6 13.1055 28.919 3 13.0 13.0198 28.942 3 13.6 12.9474 28.976 3 14.0 12.9191 29.018 2 14.4 12.9070 29.044 3 14.9 12.8904 29.065 3 15.4 12.8836 29.079 3 15.9 12.8858 29.092 3 16.5 12.9036 29.105 4 17.0 12.8885 29.105 3 17.5 12.8706 29.109 4 18.0 12.8152 29.126 4 18.5 12.7156 29.145 3 19.0 12.6456 29.157 4 19.5 12.5970 29.180 5 20.2 12.5522 29.202 3 20.3 12.5249 29.212 7