*2013/12/16 15:29:32.80 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : UTC 2003/07/17 15:00:18.000 TIME INCREMENT : 0 0 0 0.5 0 ! (day hr min sec ms) NUMBER OF RECORDS : 54 DATA DESCRIPTION : CTD FILE TYPE : ASCII NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- --------------- -------------- -------------- 1 Pressure decibar 1.143813 27.28636 2 Temperature:Primary 'deg C (ITS90)' 10.83991 14.051 3 Salinity:T0:C0 PSS-78 28.83103 29.83921 4 Number_of_bin_records n/a 2 32 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 8 F ' ' 3 4 ' ' ' ' 5 I I 0 $END $REMARKS This file converted from Sea-Bird file: Q:\Cruise_Data\2003-40\derive\2003-40 $END *ADMINISTRATION MISSION : 2003-40 AGENCY : IOS, Ocean Science and Productivity, Sidney, B.C. COUNTRY : Canada PROJECT : Saanich Inlet Optical Measurements SCIENTIST : Pena A. PLATFORM : Grebe *LOCATION GEOGRAPHIC AREA : Saanich Inlet EVENT NUMBER : 1 LATITUDE : 48 38.90500 N ! (deg min) LONGITUDE : 123 29.66600 W ! (deg min) *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-19 SERIAL NUMBER : 1294 $TABLE: SENSORS ! Name Abs Depth Serial No ! ---- -------------- ---------- ' ' ' ' ' ' $END $REMARKS SOFTWARE VERSION 1.33 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- SBE_IOS 2.5 2003/09/27 15:27:51 890 890 CLEAN 4.4 2003/09/27 15:28:02 ? ? HDREDIT2 1.7 2003/09/27 15:28:10 ? ? DELETE 6.3 2003/09/27 15:30:28 885 304 CTDEDIT 4.50 2003/09/27 15:41:16 304 242 SHIFTDAT 3.3 2003/09/29 08:44:15 ? ? ADTIMCH 4.3 2003/11/03 09:59:16 242 242 BINAVE 4.0.1 2003/11/03 10:00:15 242 54 REMOVECH 6.0 2003/11/03 16:14:49 54 54 HDREDIT2 1.8 2003/11/03 16:32:24 ? ? CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:29:32 54 54 $END $REMARKS CLEAN functions: - Set event to last 4 characters of file name -The following DELETE parameters were used: Surface Record Removal: Low Sal & Last Press Min Maximum Surface Pressure (relative): 10.00 Minimum Surface Salinity: 5.000 Surface Swell Pressure Tolerance: 1.00 Pressure NOT filtered. Swells deleted. Warning message if pressure difference of 2.00 Slow Drop Rate NOT deleted. -The following SHIFT parameters were used. Shift Channel: Fluorescence:URU:Wetlab # of Records to Advance (-ve for Delay): At REC# 0 Shift= 5.00 -The following ADTIMCH parameters were used. Add 7.00 hours to times in header file section -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 0.50 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CHANNEL(S) were removed from file. Scan_Number Conductivity:Primary Fluorescence:URU:Wetlab Irradiance (PAR) Descent_Rate Flag $END *COMMENTS SBE HEADER Sea-Bird SBE19 Data File: FileName = C:\My Documents\saanich 1.hex Software Version 1.33 Temperature SN = 1294 Conductivity SN = 1294 System UpLoad Time = Jul 22 2003 08:37:53 Saanich Inlet ds SEACAT PROFILER V3.0c SN 1294 07/22/03 08:40:20.792 strain gauge pressure sensor: S/N = 163223, range = 1,000 psia, tc = -44 clk = 32768.078 iop = 159 vmain = 11.6 vlith = 5.6 mode = PROFILE ncasts = 5 sample rate = 1 scan every 0.5 seconds minimum raw conductivity frequency for pump turn on = 10 hertz pump delay = 45 seconds samples = 1653 free = 56177 lwait = 0 msec SW1 = 90 battery cutoff = 7.2 volts number of voltages sampled = 2 logdata = NO S> dh cast 3 07/17 08:00:18 samples 128 to 1017 sample rate = 1 scan every 0.5 s econds stop = switch off S> # nquan = 9 # nvalues = 890 # units = specified # name 0 = scan: Scan Count # name 1 = prSM: Pressure, Strain Gauge [db] # name 2 = t090C: Temperature [ITS-90, deg C] # name 3 = c0S/m: Conductivity [S/m] # name 4 = wetStar: Fluorescence, Wetlab Wetstar [mg/m^3] # name 5 = par: PAR/Irradiance, Biospherical/Licor # name 6 = dz/dtM: Descent Rate [m/s] # name 7 = sal00: Salinity [PSU] # name 8 = flag: flag # span 0 = 1, 890 # span 1 = -0.081, 27.304 # span 2 = 10.8125, 14.5324 # span 3 = 0.247025, 3.562905 # span 4 = -0.7636, 25.2728 # span 5 = 1.5042e+00, 1.5042e+00 # span 6 = -0.589, 0.625 # span 7 = 1.6211, 29.8537 # span 8 = 0.0000e+00, 0.0000e+00 # interval = seconds: 0.5 # start_time = Jul 17 2003 08:00:18 # bad_flag = -9.990e-29 # sensor 0 = Frequency 0 temperature, 1294, 22-Nov-02 # sensor 1 = Frequency 1 conductivity, 1294, 22-Nov-02, cpcor = -9.5700e-08 # sensor 2 = Extrnl Volt 0 WET Labs, WETStar fluorometer, WS3S-715P, 09-Feb-01 # sensor 3 = Extrnl Volt 3 irradiance (PAR), primary, 4565, 22-July-02 # sensor 4 = Pressure Voltage, 1294, 17-Jun-99 # datcnv_date = Sep 26 2003 16:57:08, 5.28c # datcnv_in = Q:\Cruise_Data\2003-40\hex-renamed\2003-40-0001.hex Q:\Cruise_Data \2003-40\1294-Nov02-FBBP.CON # datcnv_skipover = 0 # strip_date = Sep 26 2003 17:06:25, 5.28c # strip_in = Q:\Cruise_Data\2003-40\convert\2003-40-0001.cnv # filter_date = Sep 26 2003 17:08:00, 5.28c # filter_in = Q:\Cruise_Data\2003-40\filter\2003-40-0001.cnv # filter_low_pass_tc_A = 0.500 # filter_low_pass_tc_B = 2.000 # filter_low_pass_A_vars = c0S/m # filter_low_pass_B_vars = prSM # alignctd_date = Sep 27 2003 14:52:40, 5.28c # alignctd_in = Q:\Cruise_Data\2003-40\filter\2003-40-0001.cnv # alignctd_adv = t090C 2.500, c0S/m 1.500 # Derive_date = Sep 27 2003 14:52:58, 5.28c # Derive_in = Q:\Cruise_Data\2003-40\align\2003-40-0001.cnv Q:\Cruise_Data\2003- 40\1294-Nov02-FP.CON # file_type = ascii END* CTDEDIT was used to remove records from the top 1db and to clean salinity around 4db. There was no salinity calibration sampling and no history for this instrument since its last calibration, so no estimate can be made of those errors. Salinity for this cruise has been edited, but large errors likely remain. SeaCat salinity is prone to error due to mismatch of conductivity and temperature response times, especially when the descent rate is non-uniform. These errors are likely to be much larger than calibration errors. SeaCat salinity errors are normally expected to be as high as 0.05units in areas of high gradients. Since the descent rate was very low and unsteady, the error is probably significantly higher than that especially in the top 5db. !--1--- ---2---- ---3--- -4-- !Pressu Temperat Salinit Numb !re ure: y:T0:C0 er_o ! Primary ~bin ! _rec ! ords !------ -------- ------- ---- *END OF HEADER 1.1 14.0465 28.844 32 1.5 14.0510 28.840 10 2.0 14.0117 28.834 9 2.5 13.9239 28.831 7 3.0 13.8249 28.840 8 3.5 13.4380 28.882 8 4.0 12.6405 28.935 9 4.5 12.2998 28.988 8 5.0 12.2151 29.006 8 5.5 12.1092 29.027 7 6.0 11.9803 29.059 6 6.5 11.9166 29.092 4 6.9 11.9003 29.115 4 7.4 11.8801 29.144 4 8.0 11.8493 29.229 5 8.5 11.8899 29.272 3 9.0 11.9055 29.277 4 9.5 11.8891 29.286 3 10.0 11.8579 29.299 3 10.6 11.8165 29.322 3 11.1 11.7577 29.338 2 11.5 11.6506 29.353 2 11.9 11.5243 29.365 2 12.4 11.5160 29.389 2 12.9 11.5268 29.431 2 13.5 11.5016 29.463 3 14.1 11.4815 29.473 2 14.6 11.4648 29.479 2 15.0 11.4436 29.487 2 15.5 11.4031 29.500 2 15.9 11.3523 29.519 2 16.5 11.3138 29.541 3 17.1 11.2976 29.549 2 17.6 11.2959 29.556 2 18.1 11.2922 29.559 2 18.5 11.2817 29.564 2 19.0 11.2621 29.576 2 19.5 11.2411 29.586 3 20.0 11.2204 29.595 2 20.5 11.1817 29.623 3 21.0 11.1681 29.650 2 21.4 11.1514 29.670 2 21.9 11.1313 29.685 2 22.5 11.0841 29.716 3 23.1 11.0336 29.739 2 23.6 10.9942 29.739 2 24.1 10.9347 29.733 2 24.6 10.8771 29.736 2 25.0 10.8456 29.749 2 25.5 10.8414 29.764 2 26.0 10.8516 29.799 3 26.5 10.8527 29.816 3 27.1 10.8453 29.828 12 27.3 10.8399 29.839 14