*2013/12/16 15:28:37.70 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : UTC 2003/06/01 07:13:39.000 TIME INCREMENT : 0 0 0 0.416667E-01 0 ! (day hr min sec ms) NUMBER OF RECORDS : 34 DATA DESCRIPTION : CTD FILE TYPE : ASCII NUMBER OF CHANNELS : 6 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- --------------------------- --------------- -------------- -------------- 1 Pressure decibar 3.9 36.8 2 Temperature:Primary 'deg C (ITS90)' 9.516 10.4531 3 Transmissivity %/metre 16.8 31.4 4 Fluorescence:URU:Seapoint mg/m^3 0.29E-01 7.639 5 Salinity:T0:C0 PSS-78 31.7291 31.7621 6 Number_of_bin_records n/a 20 60 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 6 F ' ' 1 4 -99 ' ' 8 F ' ' 3 5 -99 ' ' 9 F ' ' 4 6 ' ' ' ' 5 I I 0 $END $REMARKS This file converted from Sea-Bird file: Q:\Cruise_Data\2003-25\Hecate_Strait\ $END *ADMINISTRATION MISSION : 2003-25 AGENCY : PBS, Stock Assessment, Nanaimo, B.C. COUNTRY : Canada PROJECT : Hecate Strait Multi-Species Survey SCIENTIST : Workman G. PLATFORM : W.E. Ricker *LOCATION GEOGRAPHIC AREA : Hecate Strait STATION : E3 EVENT NUMBER : 18 LATITUDE : 53 44.61000 N ! (deg min) LONGITUDE : 131 8.02000 W ! (deg min) *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-911plus SERIAL NUMBER : 0506 $TABLE: SENSORS ! Name Abs Depth Serial No ! ------------------------- -------------- ---------- temperature:primary ' ' 2668 conductivity:primary ' ' 2424 pressure ' ' 69698 temperature:secondary ' ' 2374 conductivity:secondary ' ' 2399 Fluorometer ' ' Seapoint transmissometer:primary ' ' 197 $END $REMARKS SOFTWARE VERSION SEASAVE WIN32 V 5.27C $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- SBE_IOS 2.7 2004/03/08 14:58:50 3986 3986 CLEAN 4.5 2004/03/08 15:10:56 3986 3986 SHIFTDAT 3.3 2004/03/16 15:04:32 ? ? SHIFTDAT 3.3 2004/03/16 15:08:38 ? ? DELETE 6.3 2004/03/16 15:12:24 3986 1212 CTDEDIT 4.50 2004/03/17 17:19:48 1212 1036 CALIB 11.4 2004/03/22 12:23:08 1036 1036 FILTERS 4.3 2004/03/22 12:59:03 1036 1036 BINAVE 4.0.1 2004/03/22 13:05:23 1036 34 REMOVECH 6.0 2004/03/22 13:41:00 34 34 HDREDIT2 1.9 2004/03/22 14:15:43 ? ? HDREDIT2 1.9 2004/03/29 10:57:43 ? ? CALIB 11.4 2004/12/22 12:03:38 34 34 CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:28:37 34 34 $END $REMARKS CLEAN functions: - Interpolation by Record Number, in Pressure -The following SHIFT parameters were used. Shift Channel: Conductivity:Primary # of Records to Advance (-ve for Delay): At REC# 0 Shift= -1.10 Salinity was recalculated after shift -The following SHIFT parameters were used. Shift Channel: Fluorescence:URU:Seapoint # of Records to Advance (-ve for Delay): At REC# 0 Shift= 24.00 Salinity was recalculated after shift -The following DELETE parameters were used: Surface Record Removal: Low Sal & Last Press Min Maximum Surface Pressure (relative): 10.00 Minimum Surface Salinity: 5.000 Surface Swell Pressure Tolerance: 1.00 Pressure filtered over width: 15 Swells deleted. Warning message if pressure difference of 2.00 Drop rates < 0.30m/s (calculated over 11 points) will be deleted. Drop rate applies in the range 10.00 to 27.41 dbars Sample interval (from FILE section of header) = 0.042 seconds. -The following CALIB parameters were used: Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = Q:\Cruise_Data\2003-25\ctd\doc\2003-25-RECAL.CCF Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 11 Salinity:T0:C0 PSS-78 10 0.5000000E-02 0.1000000E+01 -The following FILTER parameters were used. Median filter was used. Filter width = 11 The following channel(s) were filtered. Fluorescence:URU:Seapoint -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 1.00 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CHANNEL(S) were removed from file. Scan_Number Temperature:Secondary Conductivity:Primary Conductivity:Secondary Descent_Rate Status:Pump Salinity:T1:C1 Flag -The following CALIB parameters were used: Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = Q:\Cruise_Data\RICKER recal\2003-25\2003-25-RECAL2.CCF Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 5 Salinity:T0:C0 PSS-78 10 0.1500000E-02 0.1000000E+01 $END *COMMENTS SBE HEADER Sea-Bird SBE 9 Data File: FileName = C:\data\20030025\20030025018.dat Software Version Seasave Win32 V 5.27c Temperature SN = 2668 Conductivity SN = 2424 Number of Bytes Per Scan = 24 Number of Voltage Words = 2 Number of Scans Averaged by the Deck Unit = 1 System UpLoad Time = Jun 01 2003 09:08:16 NMEA Latitude = 53 44.61 N NMEA Longitude = 131 08.02 W NMEA UTC (Time) = Jun 01 2003 07:13:39 Store Lat/Lon Data = Add to Header Only Ship: W.E Ricker WE RICKER Cruise: 2003-04 2003-25 Station: E3 Latitude: 53 44.61 Longitude: 131 08.02 Depth 39 # nquan = 13 # nvalues = 3986 # units = specified # name 0 = scan: Scan Count # name 1 = prDM: Pressure, Digiquartz [db] # name 2 = t090C: Temperature [ITS-90, deg C] # name 3 = t190C: Temperature, 2 [ITS-90, deg C] # name 4 = c0S/m: Conductivity [S/m] # name 5 = c1S/m: Conductivity, 2 [S/m] # name 6 = xmiss: Beam Transmission, Chelsea/Seatech/Wetlab CStar [%] # name 7 = flSP: Fluorescence, Seapoint # name 8 = dz/dtM: Descent Rate [m/s] # name 9 = pumps: Pump Status # name 10 = sal00: Salinity [PSU] # name 11 = sal11: Salinity, 2 [PSU] # name 12 = flag: flag # span 0 = 1, 3986 # span 1 = 1.961, 37.409 # span 2 = 9.5026, 10.4546 # span 3 = 9.5024, 10.4527 # span 4 = 3.448569, 3.527101 # span 5 = 0.186051, 3.526443 # span 6 = 57.9995, 74.9444 # span 7 = 2.1978e-02, 1.0604e+01 # span 8 = -0.953, 0.942 # span 9 = 0, 1 # span 10 = 31.6573, 31.8422 # span 11 = 1.3386, 32.1429 # span 12 = 0.0000e+00, 0.0000e+00 # interval = seconds: 0.0416667 # start_time = Jun 01 2003 09:08:16 # bad_flag = -9.990e-29 # sensor 0 = Frequency 0 temperature, primary, 2668, 20-Jun-02s # sensor 1 = Frequency 1 conductivity, primary, 2424, 16-Apr-02, cpcor = -9.57 00e-08 # sensor 2 = Frequency 2 pressure, 69698, 11-12-1997 # sensor 3 = Frequency 3 temperature, secondary, 2374, 20-Jun-02 # sensor 4 = Frequency 4 conductivity, secondary, 2399, 16-Apr-02, cpcor = -9. 5700e-08 # sensor 5 = Extrnl Volt 0 Fluorometer, Seapoint, primary # sensor 6 = Extrnl Volt 2 transmissometer, primary, 197, 22-Jan-03 # datcnv_date = Mar 08 2004 14:09:14, 5.30a # datcnv_in = Q:\Cruise_Data\2003-25\Hecate_Strait\CTD\2003-25-0018.dat Q:\Cruis e_Data\2003-25\Hecate_Strait\CTD\2003-25-ctd.con # datcnv_skipover = 0 # wildedit_date = Mar 08 2004 14:10:28, 5.30a # wildedit_in = Q:\Cruise_Data\2003-25\Hecate_Strait\CTD\convert\2003-25-0018.cn v # wildedit_pass1_nstd = 2.0 # wildedit_pass2_nstd = 5.0 # wildedit_pass2_mindelta = 0.000e+000 # wildedit_npoint = 50 # wildedit_vars = prDM # wildedit_excl_bad_scans = yes # alignctd_date = Mar 08 2004 14:11:33, 5.30a # alignctd_in = Q:\Cruise_Data\2003-25\Hecate_Strait\CTD\wildedit\2003-25-0018.c nv # alignctd_adv = c1S/m 0.073 # celltm_date = Mar 08 2004 14:13:08, 5.30a # celltm_in = Q:\Cruise_Data\2003-25\Hecate_Strait\CTD\align\2003-25-0018.cnv # celltm_alpha = 0.0200, 0.0300 # celltm_tau = 7.0000, 9.0000 # celltm_temp_sensor_use_for_cond = primary, secondary # Derive_date = Mar 08 2004 14:16:01, 5.30a # Derive_in = Q:\Cruise_Data\2003-25\Hecate_Strait\CTD\celltm\2003-25-0018.cnv Q :\Cruise_Data\2003-18\2003-18-CTD1.CON # file_type = ascii END* CTDEDIT was used to remove surface records to 3.6db and to clean salinity. -------------------------------------------------------------------- There were no salinity calibration samples for this cruise. The recalibration of salinity is based on the results of other cruises using the same equipment; the calibration sampling for those cruises was limited and there is evidence of drift in the calibration. There was a lot of fine-scale noise in the salinity channel. Salinity should be considered +/- 0.005psu. Transmissivity - The data are nominal and unedited. Fluorescence - The data are nominal and unedited. -------------------------------------------------------------------- *CALIBRATION $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------------- -------- ---- ------ ------------ Salinity:T0:C0 PSS-78 10 -99 () (0.5E-02 1) Salinity:T0:C0 PSS-78 10 -99 () (0.15E-02 1) $END !--1--- ---2---- --3-- ---4--- ---5---- -6-- !Pressu Temperat Trans Fluores Salinity Numb !re ure: missi cence: :T0:C0 er_o ! Primary vity URU: ~bin ! Seapoin _rec ! t ords !------ -------- ----- ------- -------- ---- *END OF HEADER 3.9 10.4450 17.7 0.031 31.7291 60 5.0 10.4470 17.0 0.029 31.7293 49 5.9 10.4476 17.0 0.033 31.7294 40 7.0 10.4479 17.6 0.035 31.7293 26 8.0 10.4485 17.7 0.045 31.7294 29 9.0 10.4480 17.6 0.063 31.7292 32 10.0 10.4478 17.7 0.159 31.7294 32 11.0 10.4481 17.7 0.625 31.7294 28 12.0 10.4477 16.8 1.058 31.7296 25 13.0 10.4478 17.7 1.516 31.7295 30 14.0 10.4493 17.7 2.837 31.7293 35 15.0 10.4530 17.7 2.904 31.7292 32 16.0 10.4531 17.7 3.454 31.7294 26 17.0 10.4510 17.6 3.568 31.7293 28 18.0 10.4360 17.6 5.382 31.7299 29 19.0 10.4228 17.8 6.161 31.7301 28 20.0 10.4041 18.0 5.707 31.7307 31 21.0 10.3879 17.8 4.878 31.7310 31 22.0 10.2750 18.1 4.485 31.7325 28 23.0 10.1961 18.5 5.233 31.7344 26 24.0 10.1094 19.3 4.996 31.7354 29 25.0 9.8845 22.1 4.220 31.7386 34 26.0 9.7398 25.6 3.977 31.7410 27 27.0 9.5558 28.6 3.971 31.7528 26 28.0 9.5351 30.5 4.087 31.7547 27 29.0 9.5320 31.1 4.148 31.7554 29 30.0 9.5302 31.3 4.553 31.7564 29 31.0 9.5259 31.4 5.521 31.7582 30 32.0 9.5239 31.4 7.639 31.7600 28 33.0 9.5241 31.2 7.028 31.7606 27 34.0 9.5239 31.3 5.549 31.7610 27 35.0 9.5225 31.2 4.948 31.7614 28 36.0 9.5201 31.3 4.307 31.7617 30 36.8 9.5160 31.2 4.307 31.7621 20