*2013/12/16 15:28:21.91 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : UTC 2003/04/29 23:19:34.000 TIME INCREMENT : 0 0 0 0.5 0 ! (day hr min sec ms) NUMBER OF RECORDS : 50 DATA DESCRIPTION : CTD FILE TYPE : ASCII NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- --------------- -------------- -------------- 1 Pressure decibar 1.009 50.072 2 Temperature:Primary 'deg C (ITS90)' 8.4736 8.4878 3 Salinity:T0:C0 PSS-78 30.5519 30.6062 4 Number_of_bin_records n/a 3 14 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 9 F ' ' 4 4 ' ' ' ' 5 I I 0 $END $REMARKS This file converted from Sea-Bird file: Q:\Cruise_Data\2003-17\derive\2003-17 $END *ADMINISTRATION MISSION : 2003-17 AGENCY : IOS, Ocean Science and Productivity, Sidney, BC COUNTRY : Canada PROJECT : Sea Lice Sampling SCIENTIST : Galbraith M. PLATFORM : Manyberries *LOCATION GEOGRAPHIC AREA : Broughton Archipelago EVENT NUMBER : 7 LATITUDE : 50 39.68500 N ! (deg min) LONGITUDE : 126 38.82800 W ! (deg min) WATER DEPTH : 54 *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-19 SERIAL NUMBER : 1294 $TABLE: SENSORS ! Name Abs Depth Serial No ! ---- -------------- ---------- ' ' ' ' ' ' $END $REMARKS SOFTWARE VERSION 1.33 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- SBE_IOS 2.5 2003/08/08 12:55:23 771 771 CLEAN 4.3.1 2003/08/08 12:59:57 ? ? SHIFTDAT 3.3 2003/08/08 14:51:42 ? ? REVERSE 2.0 2003/08/08 15:39:00 771 771 DELETE 6.2 2003/08/08 15:44:48 771 287 CTDEDIT 4.50 2003/08/11 14:32:53 287 235 BINAVE 4.0.1 2003/08/11 15:03:16 235 50 REMOVECH 6.0 2003/08/11 15:26:20 50 50 ADTIMCH 4.3 2003/08/11 15:30:08 50 50 HDREDIT2 1.6 2003/08/11 15:40:25 ? ? CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:28:21 50 50 $END $REMARKS CLEAN functions: - Set event to last 4 characters of file name -The following SHIFT parameters were used. Shift Channel: Temperature:Primary # of Records to Advance (-ve for Delay): At REC# 0 Shift= 1.40 Salinity was recalculated after shift -The following DELETE parameters were used: Surface Record Removal: Last Press Min Maximum Surface Pressure (relative): 10.00 Surface Swell Pressure Tolerance: 1.00 Pressure filtered over width: 5 Swells deleted. Warning message if pressure difference of 2.00 Slow Drop Rate NOT deleted. Sample interval (from user input) = 0.000 seconds. -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 1.00 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CHANNEL(S) were removed from file. Scan_Number Conductivity:Primary Descent_Rate Flag -The following ADTIMCH parameters were used. Add 8.00 hours to times in header file section $END *COMMENTS SBE HEADER Sea-Bird SBE19 Data File: FileName = C:\My Documents\ios03170008.hex Software Version 1.33 Temperature SN = 1294 Conductivity SN = 1294 System UpLoad Time = Apr 29 2003 23:02:14 ios03170008 ds SEACAT PROFILER V3.0c SN 1294 04/29/03 22:03:24.324 strain gauge pressure sensor: S/N = 163223, range = 1,000 psia, tc = -44 clk = 32767.922 iop = 162 vmain = 12.0 vlith = 5.3 mode = PROFILE ncasts = 5 sample rate = 1 scan every 0.5 seconds minimum raw conductivity frequency for pump turn on = 10 hertz pump delay = 45 seconds samples = 3701 free = 83044 lwait = 0 msec SW1 = 90 battery cutoff = 7.2 volts number of voltages sampled = 0 logdata = NO S> dh cast 2 04/29 15:19:34 samples 1059 to 1829 sample rate = 1 scan every 0.5 seconds stop = switch off S> # nquan = 7 # nvalues = 771 # units = specified # name 0 = scan: Scan Count # name 1 = prSM: Pressure, Strain Gauge [db] # name 2 = t090C: Temperature [ITS-90, deg C] # name 3 = c0S/m: Conductivity [S/m] # name 4 = dz/dtM: Descent Rate [m/s] # name 5 = sal00: Salinity [PSU] # name 6 = flag: flag # span 0 = 1, 771 # span 1 = -0.430, 50.603 # span 2 = 8.4688, 15.5265 # span 3 = 0.002383, 3.462901 # span 4 = -0.589, 0.982 # span 5 = 0.0183, 32.6789 # span 6 = 0.0000e+00, 0.0000e+00 # interval = seconds: 0.5 # start_time = Apr 29 2003 15:19:34 # bad_flag = -9.990e-29 # sensor 0 = Frequency 0 temperature, 1294, 22-Nov-02 # sensor 1 = Frequency 1 conductivity, 1294, 22-Nov-02, cpcor = -9.5700e-08 # sensor 2 = Pressure Voltage, 1294, 17-jun-99 # datcnv_date = Aug 08 2003 09:55:55, 5.28c # datcnv_in = Q:\Cruise_Data\2003-17\2003-17-0007.hex Q:\Cruise_Data\2003-17\129 4-Nov22.CON # datcnv_skipover = 0 # filter_date = Aug 08 2003 12:49:10, 5.28c # filter_in = Q:\Cruise_Data\2003-17\convert\2003-17-0007.cnv # filter_low_pass_tc_A = 0.500 # filter_low_pass_tc_B = 2.000 # filter_low_pass_A_vars = c0S/m # filter_low_pass_B_vars = prSM t090C # Derive_date = Aug 08 2003 12:52:35, 5.28c # Derive_in = Q:\Cruise_Data\2003-17\filter\2003-17-0007.cnv Q:\Cruise_Data\2003 -17\1294-Nov22.CON # file_type = ascii END* This file contains upcast data. CTDEDIT was used to remove the top 0.5db and a few records from the bottom of the cast. Salinity was cleaned. _____________________________________________________________________________ There was no salinity calibration sampling and no history for this instrument since its last calibration, so no estimate can be made of those errors. SeaCat salinity is prone to error due to mismatch of conductivity and temperature response times especially when the descent rate is non-uniform. These errors are likely to be much larger than calibration errors. Salinity for this cruise has been edited lightly, but errors as high as 0.05units of salinity are likely. !--1--- ---2---- ---3---- -4-- !Pressu Temperat Salinity Numb !re ure: :T0:C0 er_o ! Primary ~bin ! _rec ! ords !------ -------- -------- ---- *END OF HEADER 1.0 8.4878 30.5519 9 2.0 8.4806 30.5893 7 3.0 8.4806 30.5903 6 4.0 8.4806 30.5906 4 4.9 8.4793 30.5895 4 5.9 8.4776 30.5891 4 6.9 8.4760 30.5891 4 7.9 8.4744 30.5894 4 8.9 8.4736 30.5898 4 9.9 8.4740 30.5907 4 11.0 8.4755 30.5924 5 12.1 8.4760 30.5934 4 13.1 8.4753 30.5959 4 14.1 8.4752 30.5981 4 15.1 8.4756 30.5981 4 16.1 8.4759 30.5992 4 17.0 8.4762 30.5997 4 18.0 8.4763 30.5994 5 19.0 8.4759 30.5996 5 20.0 8.4757 30.5994 5 21.0 8.4759 30.5993 4 22.0 8.4759 30.6003 5 23.0 8.4760 30.6005 4 24.0 8.4763 30.6001 4 24.9 8.4765 30.5992 4 26.0 8.4765 30.5983 5 27.1 8.4763 30.5987 4 28.0 8.4762 30.5989 4 29.0 8.4762 30.5985 4 30.0 8.4762 30.5980 4 31.0 8.4759 30.5975 4 31.9 8.4762 30.5984 4 32.9 8.4767 30.6000 4 33.9 8.4774 30.6004 4 34.9 8.4776 30.6003 4 35.9 8.4776 30.6001 4 36.9 8.4776 30.6006 4 38.0 8.4776 30.6011 5 39.1 8.4776 30.6012 4 40.1 8.4778 30.6007 4 41.1 8.4778 30.6008 4 42.0 8.4775 30.6005 3 42.9 8.4775 30.6006 4 43.9 8.4777 30.6013 4 44.9 8.4785 30.6022 4 45.9 8.4792 30.6023 5 47.0 8.4787 30.6024 6 48.0 8.4778 30.6031 7 49.0 8.4772 30.6031 7 50.1 8.4772 30.6062 14