*2013/12/16 15:27:28.61 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : UTC 2003/02/19 21:09:45.000 TIME INCREMENT : 0 0 0 0.125 0 ! (day hr min sec ms) NUMBER OF RECORDS : 53 DATA DESCRIPTION : CTD FILE TYPE : ASCII NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- --------------- -------------- -------------- 1 Pressure decibar 1.337 53.05567 2 Temperature:Primary 'deg C (ITS90)' 9.151667 9.543934 3 Salinity:T0:C0 PSS-78 30.34968 31.17007 4 Number_of_bin_records n/a 2 8 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 9 F ' ' 4 4 ' ' ' ' 5 I I 0 $END $REMARKS This file converted from Sea-Bird file: Q:\CTD\2003-04\derive\2003-04-0090.cn $END *ADMINISTRATION MISSION : 2003-04 AGENCY : PBS, Ocean Science and Productivity, Sidney, B.C. COUNTRY : Canada PROJECT : High Seas Salmon SCIENTIST : Zubkowski T. PLATFORM : Ricker *LOCATION GEOGRAPHIC AREA : N.E.Pacific STATION : VI 03 EVENT NUMBER : 90 LATITUDE : 50 24.48000 N ! (deg min) LONGITUDE : 128 0.11000 W ! (deg min) WATER DEPTH : 160 *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-25 SERIAL NUMBER : 0334 $TABLE: SENSORS ! Name Abs Depth Serial No ! ---- -------------- ---------- ' ' ' ' ' ' $END $REMARKS SOFTWARE VERSION 1.32 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- SBE_IOS 2.5 2003/07/10 12:52:27 2980 2980 ADTIMCH 4.1 2003/07/10 15:26:04 2979 2979 SHIFTDAT 3.3 2003/07/11 15:04:25 ? ? CLEAN 4.3 2003/07/11 15:07:40 2979 2979 DELETE 6.2 2003/07/11 15:09:02 2979 241 CTDEDIT 4.50 2003/07/11 16:53:53 241 241 BINAVE 4.0.1 2003/07/14 18:18:43 241 53 REMOVECH 6.0 2003/07/15 08:37:03 53 53 HDREDIT2 1.6 2003/07/15 09:44:21 ? ? CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:27:28 53 53 $END $REMARKS -The following ADTIMCH parameters were used. Add 8.00 hours to times in header file section Add 8.00 hours to times in data records Change time zone to UTC in header file section -The following SHIFT parameters were used. Shift Channel: Conductivity:Primary # of Records to Advance (-ve for Delay): At REC# 0 Shift= 0.40 Salinity was recalculated after shift CLEAN functions: - Interpolation by Record Number. -The following DELETE parameters were used: Surface Record Removal: Low Sal & Last Press Min Maximum Surface Pressure (relative): 10.00 Minimum Surface Salinity: 5.000 Surface Swell Pressure Tolerance: 1.00 Pressure NOT filtered. Swells deleted. Warning message if pressure difference of 2.00 Drop rates < 0.30m/s (calculated over 7 points) will be deleted. Drop rate applies in the range 0.00 to 53.26 dbars Sample interval (from FILE section of header) = 0.125 seconds. -The following BINAVE parameters were used: Bin channel = Pressure:StrainGauge Averaging interval = 1.00 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CHANNEL(S) were removed from file. Scan_Number Conductivity:Primary Descent_Rate Flag $END *COMMENTS SBE HEADER Sea-Bird SBE25 Data File: FileName = D:\0334\0334012.hex Software Version 1.32 Temperature SN = 4054 Conductivity SN = 2754 System UpLoad Time = Mar 21 2003 11:15:45 Cast 13 ds SBE 25 CTD V 4.1a SN 334 03/21/03 10:52:16.500 external pressure sensor, range = 10153 psia, tcval = 37 xtal = 9437184 clk = 32767.743 vmain = 12.3 iop = 160 vlith = 5.5 ncasts = 60 samples = 243991 free = 518250 lwait = 0 msec CTD configuration: number of scans averaged = 1, data stored at 8 scans per second real time data transmitted at 1 scans per second minimum conductivity frequency for pump turn on = 3500 battery type = ALKALINE 2 external voltages sampled stored voltage # 0 = external voltage 0 stored voltage # 1 = external voltage 1 S> dh cast 12 02/19 13:09:45 smpls 37364 to 40343 nv = 2 avg = 1 stp = switch o f S> # nquan = 7 # nvalues = 2980 # units = specified # name 0 = scan: Scan Count # name 1 = prSM: Pressure, Strain Gauge [db] # name 2 = t090C: Temperature [ITS-90, deg C] # name 3 = c0S/m: Conductivity [S/m] # name 4 = dz/dtM: Descent Rate [m/s] # name 5 = sal00: Salinity [PSU] # name 6 = flag: flag # span 0 = 1, 2980 # span 1 = -1.555, 53.262 # span 2 = -4.6922, 9.5455 # span 3 = 0.009135, 3.395936 # span 4 = -1.675, 1.845 # span 5 = 0.0894, 31.1755 # span 6 = 0.0000e+00, 0.0000e+00 # interval = seconds: 0.125 # start_time = Feb 19 2003 13:09:45 # bad_flag = -9.990e-29 # sensor 0 = Frequency 0 temperature, 4054, 19-Jun-02s # sensor 1 = Frequency 1 conductivity, 2754, 22-May-02s, cpcor = -9.5700e-08 # sensor 2 = Pressure Voltage, 290482, 13-Apr-02, cpcor = -9.5700e-08 # datcnv_date = Jul 08 2003 16:58:26, 5.28c # datcnv_in = Q:\CTD\2003-04\2003-04-0090.hex Q:\CTD\2003-04\0334CTD.con # datcnv_skipover = 0 # wildedit_date = Jul 08 2003 17:03:12, 5.28c # wildedit_in = Q:\CTD\2003-04\convert\2003-04-0090.cnv # wildedit_pass1_nstd = 2.0 # wildedit_pass2_nstd = 20.0 # wildedit_pass2_mindelta = 0.000e+000 # wildedit_npoint = 25 # wildedit_vars = t090C c0S/m # wildedit_excl_bad_scans = yes # wfilter_date = Jul 10 2003 11:12:57, 5.28c # wfilter_in = Q:\CTD\2003-04\wildedit\2003-04-0090.cnv # wfilter_excl_bad_scans = yes # wfilter_action prSM = cosine, 5 # celltm_date = Jul 10 2003 11:44:36, 5.28c # celltm_in = Q:\CTD\2003-04\filter\2003-04-0090.cnv # celltm_alpha = 0.0300, 0.0000 # celltm_tau = 7.0000, 0.0000 # celltm_temp_sensor_use_for_cond = primary, # celltm_date = Jul 10 2003 12:50:50, 5.28c # celltm_in = Q:\CTD\2003-04\filter\2003-04-0090.cnv # celltm_alpha = 0.0300, 0.0000 # celltm_tau = 9.0000, 0.0000 # celltm_temp_sensor_use_for_cond = primary, # Derive_date = Jul 10 2003 12:51:42, 5.28c # Derive_in = Q:\CTD\2003-04\align\2003-04-0090.cnv Q:\CTD\2002-23\22230011.CON # file_type = ascii END* CTDEDIT was used to clean S very lightly near the surface. ******************************************************************************** This data was obtained using a SeaBird 25 and pressure should be considered ±1db except for casts 143-152, 161-167, 173-211 for which it should be considered ±2db due to problems with the pressure sensor. The following casts derive from upcast data so that the quality of the temperature and salinity data will be lower than usual: 111,149,152,173,192,211. ******************************************************************************** !--1--- ---2---- ---3---- -4-- !Pressu Temperat Salinity Numb !re ure: :T0:C0 er_o ! Primary ~bin ! _rec ! ords !------ -------- -------- ---- *END OF HEADER 1.3 9.1517 30.3526 2 2.2 9.1517 30.3521 3 3.0 9.1533 30.3507 3 4.1 9.1527 30.3497 8 4.9 9.1530 30.3504 4 5.9 9.1523 30.3578 4 7.0 9.1562 30.3646 6 7.9 9.1638 30.3766 3 9.0 9.1821 30.3975 6 9.9 9.2170 30.4320 5 11.0 9.2759 30.4855 4 12.0 9.2932 30.5028 4 13.0 9.2992 30.5093 3 14.0 9.3004 30.5094 4 15.0 9.3023 30.5108 3 16.0 9.3026 30.5104 7 17.0 9.3026 30.5103 5 18.0 9.3056 30.5130 6 18.9 9.3107 30.5175 5 19.8 9.3129 30.5186 4 20.9 9.3171 30.5246 5 22.1 9.3251 30.5352 5 23.0 9.3262 30.5374 5 24.0 9.3287 30.5411 5 24.9 9.3336 30.5466 4 26.1 9.3384 30.5535 6 27.0 9.3449 30.5640 5 27.9 9.3483 30.5682 7 29.1 9.3658 30.5919 2 30.0 9.3759 30.6070 6 31.0 9.3883 30.6245 5 32.0 9.3938 30.6338 3 33.1 9.3929 30.6421 4 34.0 9.3910 30.6589 5 34.9 9.3915 30.6713 5 36.1 9.3921 30.6766 5 37.0 9.3924 30.6821 4 38.1 9.3936 30.6861 4 39.2 9.3940 30.7010 4 40.1 9.3945 30.7035 3 41.0 9.3948 30.7055 4 42.0 9.4030 30.7237 4 43.0 9.4193 30.7486 4 44.0 9.4306 30.7670 4 45.0 9.4388 30.7886 5 45.9 9.4502 30.8146 6 46.9 9.4553 30.8282 5 48.1 9.4686 30.8589 6 49.0 9.4858 30.9184 5 50.0 9.4874 30.9463 3 50.9 9.4978 31.0037 5 52.0 9.5292 31.1116 6 53.1 9.5439 31.1701 3