*2013/12/16 15:27:28.48 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : UTC 2003/02/19 00:24:49.000 TIME INCREMENT : 0 0 0 0.125 0 ! (day hr min sec ms) NUMBER OF RECORDS : 52 DATA DESCRIPTION : CTD FILE TYPE : ASCII NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- --------------- -------------- -------------- 1 Pressure decibar 1.909375 53.05567 2 Temperature:Primary 'deg C (ITS90)' 9.263363 9.9045 3 Salinity:T0:C0 PSS-78 27.93502 31.54767 4 Number_of_bin_records n/a 2 8 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 9 F ' ' 4 4 ' ' ' ' 5 I I 0 $END $REMARKS This file converted from Sea-Bird file: Q:\CTD\2003-04\derive\2003-04-0075.cn $END *ADMINISTRATION MISSION : 2003-04 AGENCY : PBS, Ocean Science and Productivity, Sidney, B.C. COUNTRY : Canada PROJECT : High Seas Salmon SCIENTIST : Zubkowski T. PLATFORM : Ricker *LOCATION GEOGRAPHIC AREA : N.E.Pacific STATION : IVI 12 EVENT NUMBER : 75 LATITUDE : 50 5.19000 N ! (deg min) LONGITUDE : 127 9.25000 W ! (deg min) WATER DEPTH : 161 *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-25 SERIAL NUMBER : 0334 $TABLE: SENSORS ! Name Abs Depth Serial No ! ---- -------------- ---------- ' ' ' ' ' ' $END $REMARKS SOFTWARE VERSION 1.32 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- SBE_IOS 2.5 2003/07/10 12:52:25 2650 2650 ADTIMCH 4.1 2003/07/10 15:26:01 2650 2650 SHIFTDAT 3.3 2003/07/11 15:04:23 ? ? CLEAN 4.3 2003/07/11 15:07:35 2650 2650 DELETE 6.2 2003/07/11 15:08:59 2650 262 CTDEDIT 4.50 2003/07/11 16:32:37 262 255 BINAVE 4.0.1 2003/07/14 18:18:43 255 52 REMOVECH 6.0 2003/07/15 08:37:03 52 52 HDREDIT2 1.6 2003/07/15 09:44:21 ? ? CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:27:28 52 52 $END $REMARKS -The following ADTIMCH parameters were used. Add 8.00 hours to times in header file section Add 8.00 hours to times in data records Change time zone to UTC in header file section -The following SHIFT parameters were used. Shift Channel: Conductivity:Primary # of Records to Advance (-ve for Delay): At REC# 0 Shift= 0.40 Salinity was recalculated after shift CLEAN functions: - Interpolation by Record Number. -The following DELETE parameters were used: Surface Record Removal: Low Sal & Last Press Min Maximum Surface Pressure (relative): 10.00 Minimum Surface Salinity: 5.000 Surface Swell Pressure Tolerance: 1.00 Pressure NOT filtered. Swells deleted. Warning message if pressure difference of 2.00 Drop rates < 0.30m/s (calculated over 7 points) will be deleted. Drop rate applies in the range 0.00 to 53.26 dbars Sample interval (from FILE section of header) = 0.125 seconds. -The following BINAVE parameters were used: Bin channel = Pressure:StrainGauge Averaging interval = 1.00 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CHANNEL(S) were removed from file. Scan_Number Conductivity:Primary Descent_Rate Flag $END *COMMENTS SBE HEADER Sea-Bird SBE25 Data File: FileName = D:\0334\0334007.hex Software Version 1.32 Temperature SN = 4054 Conductivity SN = 2754 System UpLoad Time = Mar 21 2003 11:06:33 Cast 7 ds SBE 25 CTD V 4.1a SN 334 03/21/03 10:52:16.500 external pressure sensor, range = 10153 psia, tcval = 37 xtal = 9437184 clk = 32767.743 vmain = 12.3 iop = 160 vlith = 5.5 ncasts = 60 samples = 243991 free = 518250 lwait = 0 msec CTD configuration: number of scans averaged = 1, data stored at 8 scans per second real time data transmitted at 1 scans per second minimum conductivity frequency for pump turn on = 3500 battery type = ALKALINE 2 external voltages sampled stored voltage # 0 = external voltage 0 stored voltage # 1 = external voltage 1 S> dh cast 7 02/18 16:24:49 smpls 21673 to 24297 nv = 2 avg = 1 stp = switch of S> # nquan = 7 # nvalues = 2650 # units = specified # name 0 = scan: Scan Count # name 1 = prSM: Pressure, Strain Gauge [db] # name 2 = t090C: Temperature [ITS-90, deg C] # name 3 = c0S/m: Conductivity [S/m] # name 4 = dz/dtM: Descent Rate [m/s] # name 5 = sal00: Salinity [PSU] # name 6 = flag: flag # span 0 = 1, 2625 # span 1 = -1.555, 53.262 # span 2 = -7.6114, 9.9127 # span 3 = 0.017601, 3.462703 # span 4 = -1.360, 1.675 # span 5 = 0.1830, 31.5536 # span 6 = 0.0000e+00, 0.0000e+00 # interval = seconds: 0.125 # start_time = Feb 18 2003 16:24:49 # bad_flag = -9.990e-29 # sensor 0 = Frequency 0 temperature, 4054, 19-Jun-02s # sensor 1 = Frequency 1 conductivity, 2754, 22-May-02s, cpcor = -9.5700e-08 # sensor 2 = Pressure Voltage, 290482, 13-Apr-02, cpcor = -9.5700e-08 # datcnv_date = Jul 08 2003 16:58:25, 5.28c # datcnv_in = Q:\CTD\2003-04\2003-04-0075.hex Q:\CTD\2003-04\0334CTD.con # datcnv_skipover = 0 # wildedit_date = Jul 08 2003 17:03:11, 5.28c # wildedit_in = Q:\CTD\2003-04\convert\2003-04-0075.cnv # wildedit_pass1_nstd = 2.0 # wildedit_pass2_nstd = 20.0 # wildedit_pass2_mindelta = 0.000e+000 # wildedit_npoint = 25 # wildedit_vars = t090C c0S/m # wildedit_excl_bad_scans = yes # wfilter_date = Jul 10 2003 11:12:55, 5.28c # wfilter_in = Q:\CTD\2003-04\wildedit\2003-04-0075.cnv # wfilter_excl_bad_scans = yes # wfilter_action prSM = cosine, 5 # celltm_date = Jul 10 2003 11:44:35, 5.28c # celltm_in = Q:\CTD\2003-04\filter\2003-04-0075.cnv # celltm_alpha = 0.0300, 0.0000 # celltm_tau = 7.0000, 0.0000 # celltm_temp_sensor_use_for_cond = primary, # celltm_date = Jul 10 2003 12:50:49, 5.28c # celltm_in = Q:\CTD\2003-04\filter\2003-04-0075.cnv # celltm_alpha = 0.0300, 0.0000 # celltm_tau = 9.0000, 0.0000 # celltm_temp_sensor_use_for_cond = primary, # Derive_date = Jul 10 2003 12:51:41, 5.28c # Derive_in = Q:\CTD\2003-04\align\2003-04-0075.cnv Q:\CTD\2002-23\22230011.CON # file_type = ascii END* CTDEDIT was used to remove records from the top 1.3db. ******************************************************************************** This data was obtained using a SeaBird 25 and pressure should be considered ±1db except for casts 143-152, 161-167, 173-211 for which it should be considered ±2db due to problems with the pressure sensor. The following casts derive from upcast data so that the quality of the temperature and salinity data will be lower than usual: 111,149,152,173,192,211. ******************************************************************************** !--1--- ---2---- ---3---- -4-- !Pressu Temperat Salinity Numb !re ure: :T0:C0 er_o ! Primary ~bin ! _rec ! ords !------ -------- -------- ---- *END OF HEADER 1.9 9.2634 27.9350 8 2.8 9.3429 28.4423 7 4.0 9.4438 29.0287 4 4.8 9.4469 29.1257 6 6.0 9.4443 29.1814 3 7.1 9.4151 29.5471 7 8.0 9.4120 29.6129 5 9.0 9.4179 29.6345 4 10.1 9.4229 29.6500 3 11.0 9.4240 29.6577 3 12.0 9.4256 29.6890 2 13.0 9.4303 29.7249 5 14.0 9.4412 29.7865 7 15.1 9.4702 29.9003 6 16.0 9.4909 29.9695 4 16.9 9.5065 30.0171 5 18.1 9.5202 30.0578 3 19.0 9.5328 30.1048 4 19.9 9.5386 30.1536 5 20.8 9.5385 30.1855 4 22.1 9.5484 30.1973 5 23.1 9.5528 30.2033 3 24.0 9.5834 30.2832 6 24.9 9.5934 30.3380 5 25.9 9.5919 30.3950 5 27.0 9.6466 30.5855 7 27.9 9.6610 30.6096 7 29.0 9.6877 30.6652 3 30.0 9.7168 30.7224 7 30.9 9.7298 30.7658 4 32.0 9.7548 30.8233 7 33.1 9.7437 30.8526 4 33.9 9.7632 30.9233 3 35.0 9.7941 30.9664 4 36.0 9.8334 31.0247 3 37.1 9.8352 31.0527 4 38.1 9.8383 31.0784 4 39.2 9.8470 31.1490 3 40.1 9.8558 31.1793 6 41.0 9.8635 31.2155 7 41.9 9.8759 31.2412 6 42.9 9.8819 31.2536 3 43.9 9.8878 31.2707 6 45.0 9.8923 31.3004 3 46.1 9.8831 31.3447 6 47.0 9.8836 31.3767 4 48.0 9.8884 31.4041 8 49.0 9.8958 31.4621 5 50.0 9.8953 31.4844 8 51.0 9.9045 31.5217 5 51.9 9.8933 31.5413 6 53.1 9.8843 31.5477 3