*2013/12/16 15:27:28.36 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : UTC 2003/02/18 16:52:01.000 TIME INCREMENT : 0 0 0 0.125 0 ! (day hr min sec ms) NUMBER OF RECORDS : 52 DATA DESCRIPTION : CTD FILE TYPE : ASCII NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- --------------- -------------- -------------- 1 Pressure decibar 1.337 51.9908 2 Temperature:Primary 'deg C (ITS90)' 9.0793 9.73528 3 Salinity:T0:C0 PSS-78 30.1964 31.37002 4 Number_of_bin_records n/a 2 8 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 9 F ' ' 4 4 ' ' ' ' 5 I I 0 $END $REMARKS This file converted from Sea-Bird file: Q:\CTD\2003-04\derive\2003-04-0060.cn $END *ADMINISTRATION MISSION : 2003-04 AGENCY : PBS, Ocean Science and Productivity, Sidney, B.C. COUNTRY : Canada PROJECT : High Seas Salmon SCIENTIST : Zubkowski T. PLATFORM : Ricker *LOCATION GEOGRAPHIC AREA : N.E.Pacific STATION : VI 02 EVENT NUMBER : 60 LATITUDE : 49 55.15000 N ! (deg min) LONGITUDE : 127 26.14000 W ! (deg min) WATER DEPTH : 64 *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-25 SERIAL NUMBER : 0334 $TABLE: SENSORS ! Name Abs Depth Serial No ! ---- -------------- ---------- ' ' ' ' ' ' $END $REMARKS SOFTWARE VERSION 1.32 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- SBE_IOS 2.5 2003/07/10 12:52:23 3338 3338 ADTIMCH 4.1 2003/07/10 15:25:58 3332 3332 SHIFTDAT 3.3 2003/07/11 15:04:21 ? ? CLEAN 4.3 2003/07/11 15:07:32 3332 3332 DELETE 6.2 2003/07/11 15:08:57 3332 267 CTDEDIT 4.50 2003/07/11 16:16:26 267 267 BINAVE 4.0.1 2003/07/14 18:18:42 267 52 REMOVECH 6.0 2003/07/15 08:37:03 52 52 HDREDIT2 1.6 2003/07/15 09:44:21 ? ? CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:27:28 52 52 $END $REMARKS -The following ADTIMCH parameters were used. Add 8.00 hours to times in header file section Add 8.00 hours to times in data records Change time zone to UTC in header file section -The following SHIFT parameters were used. Shift Channel: Conductivity:Primary # of Records to Advance (-ve for Delay): At REC# 0 Shift= 0.40 Salinity was recalculated after shift CLEAN functions: - Interpolation by Record Number. -The following DELETE parameters were used: Surface Record Removal: Low Sal & Last Press Min Maximum Surface Pressure (relative): 10.00 Minimum Surface Salinity: 5.000 Surface Swell Pressure Tolerance: 1.00 Pressure NOT filtered. Swells deleted. Warning message if pressure difference of 2.00 Drop rates < 0.30m/s (calculated over 7 points) will be deleted. Drop rate applies in the range 0.00 to 52.36 dbars Sample interval (from FILE section of header) = 0.125 seconds. -The following BINAVE parameters were used: Bin channel = Pressure:StrainGauge Averaging interval = 1.00 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CHANNEL(S) were removed from file. Scan_Number Conductivity:Primary Descent_Rate Flag $END *COMMENTS SBE HEADER Sea-Bird SBE25 Data File: FileName = D:\0334\0334002.hex Software Version 1.32 Temperature SN = 4054 Conductivity SN = 2754 System UpLoad Time = Mar 21 2003 10:57:04 Cast 3 ds SBE 25 CTD V 4.1a SN 334 03/21/03 10:52:16.500 external pressure sensor, range = 10153 psia, tcval = 37 xtal = 9437184 clk = 32767.743 vmain = 12.3 iop = 160 vlith = 5.5 ncasts = 60 samples = 243991 free = 518250 lwait = 0 msec CTD configuration: number of scans averaged = 1, data stored at 8 scans per second real time data transmitted at 1 scans per second minimum conductivity frequency for pump turn on = 3500 battery type = ALKALINE 2 external voltages sampled stored voltage # 0 = external voltage 0 stored voltage # 1 = external voltage 1 S> dh cast 2 02/18 08:52:01 smpls 6571 to 9908 nv = 2 avg = 1 stp = switch of S> # nquan = 7 # nvalues = 3338 # units = specified # name 0 = scan: Scan Count # name 1 = prSM: Pressure, Strain Gauge [db] # name 2 = t090C: Temperature [ITS-90, deg C] # name 3 = c0S/m: Conductivity [S/m] # name 4 = dz/dtM: Descent Rate [m/s] # name 5 = sal00: Salinity [PSU] # name 6 = flag: flag # span 0 = 1, 3338 # span 1 = -2.461, 52.356 # span 2 = -4.4493, 9.7366 # span 3 = 0.032352, 3.431552 # span 4 = -1.651, 1.991 # span 5 = 0.2309, 31.3717 # span 6 = 0.0000e+00, 0.0000e+00 # interval = seconds: 0.125 # start_time = Feb 18 2003 08:52:01 # bad_flag = -9.990e-29 # sensor 0 = Frequency 0 temperature, 4054, 19-Jun-02s # sensor 1 = Frequency 1 conductivity, 2754, 22-May-02s, cpcor = -9.5700e-08 # sensor 2 = Pressure Voltage, 290482, 13-Apr-02, cpcor = -9.5700e-08 # datcnv_date = Jul 08 2003 16:58:24, 5.28c # datcnv_in = Q:\CTD\2003-04\2003-04-0060.hex Q:\CTD\2003-04\0334CTD.con # datcnv_skipover = 0 # wildedit_date = Jul 08 2003 17:03:10, 5.28c # wildedit_in = Q:\CTD\2003-04\convert\2003-04-0060.cnv # wildedit_pass1_nstd = 2.0 # wildedit_pass2_nstd = 20.0 # wildedit_pass2_mindelta = 0.000e+000 # wildedit_npoint = 25 # wildedit_vars = t090C c0S/m # wildedit_excl_bad_scans = yes # wfilter_date = Jul 10 2003 11:12:54, 5.28c # wfilter_in = Q:\CTD\2003-04\wildedit\2003-04-0060.cnv # wfilter_excl_bad_scans = yes # wfilter_action prSM = cosine, 5 # celltm_date = Jul 10 2003 11:44:33, 5.28c # celltm_in = Q:\CTD\2003-04\filter\2003-04-0060.cnv # celltm_alpha = 0.0300, 0.0000 # celltm_tau = 7.0000, 0.0000 # celltm_temp_sensor_use_for_cond = primary, # celltm_date = Jul 10 2003 12:50:46, 5.28c # celltm_in = Q:\CTD\2003-04\filter\2003-04-0060.cnv # celltm_alpha = 0.0300, 0.0000 # celltm_tau = 9.0000, 0.0000 # celltm_temp_sensor_use_for_cond = primary, # Derive_date = Jul 10 2003 12:51:39, 5.28c # Derive_in = Q:\CTD\2003-04\align\2003-04-0060.cnv Q:\CTD\2002-23\22230011.CON # file_type = ascii END* CTDEDIT was used to clean S lightly. ******************************************************************************** This data was obtained using a SeaBird 25 and pressure should be considered ±1db except for casts 143-152, 161-167, 173-211 for which it should be considered ±2db due to problems with the pressure sensor. The following casts derive from upcast data so that the quality of the temperature and salinity data will be lower than usual: 111,149,152,173,192,211. ******************************************************************************** !--1--- ---2---- ---3---- -4-- !Pressu Temperat Salinity Numb !re ure: :T0:C0 er_o ! Primary ~bin ! _rec ! ords !------ -------- -------- ---- *END OF HEADER 1.3 9.0793 30.1999 2 2.0 9.0793 30.1964 7 3.0 9.1067 30.2617 3 4.0 9.1097 30.2694 4 4.9 9.1143 30.2840 8 6.1 9.1416 30.3505 5 7.0 9.1480 30.3682 6 7.9 9.1566 30.3875 5 9.0 9.1732 30.4232 6 9.9 9.2030 30.4806 6 11.0 9.2096 30.4960 3 12.0 9.2235 30.5195 7 12.9 9.2589 30.5623 6 14.0 9.4310 30.8208 7 14.8 9.6066 31.0449 5 16.1 9.6389 31.0679 4 16.8 9.6654 31.0838 4 18.1 9.6690 31.0845 6 18.9 9.6714 31.0862 4 20.0 9.6721 31.0860 6 20.9 9.6715 31.0848 3 22.0 9.7030 31.1878 7 23.0 9.7093 31.2041 5 23.9 9.7127 31.2178 4 25.0 9.7145 31.2248 6 26.0 9.7104 31.2313 5 27.0 9.7046 31.2356 7 28.1 9.7042 31.2411 4 29.2 9.7002 31.2477 5 30.0 9.6938 31.2573 5 31.0 9.6910 31.2615 4 32.1 9.6903 31.2636 4 33.1 9.6905 31.2645 7 34.1 9.6917 31.2662 6 34.9 9.6948 31.2699 6 36.0 9.6987 31.2752 7 37.0 9.7007 31.2783 5 38.1 9.7007 31.2796 5 39.2 9.7012 31.2810 3 40.1 9.7022 31.2820 3 41.0 9.7041 31.2840 4 41.9 9.7085 31.2880 7 43.0 9.7102 31.2903 4 43.9 9.7097 31.2911 6 44.9 9.7116 31.2985 4 45.9 9.7226 31.3287 6 46.8 9.7257 31.3428 5 48.1 9.7250 31.3499 5 49.1 9.7239 31.3540 3 50.2 9.7308 31.3632 6 51.1 9.7339 31.3684 7 52.0 9.7353 31.3700 5