*2013/12/16 15:26:55.25 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : UTC 2002/09/23 20:05:33.000 TIME INCREMENT : 0 0 0 0.416667E-01 0 ! (day hr min sec ms) NUMBER OF RECORDS : 43 DATA DESCRIPTION : CTD FILE TYPE : ASCII DATA TYPE : REAL*4 NUMBER OF CHANNELS : 6 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- --------------------------- --------------- -------------- -------------- 1 Pressure decibar 2.3 43.7 2 Temperature:Primary 'deg C (ITS90)' 8.8174 11.9942 3 Transmissivity %/metre 34.9 55.7 4 Fluorescence:URU:Seapoint mg/m^3 0.363 1.933 5 Salinity:T0:C0 PSS-78 31.7942 32.6267 6 Number_of_bin_records n/a 8 51 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -9.9 ' ' 7 F ' ' 1 2 -9.9 ' ' 9 F ' ' 4 3 -9.9 ' ' 7 F ' ' 1 4 -9.9 ' ' 8 F ' ' 3 5 -9.9 ' ' 9 F ' ' 4 6 ' ' ' ' 5 F ' ' 0 $END $REMARKS This file converted from Sea-Bird file: Q:\CTD\2002-32\derive\2002-32-0107.cn $END *ADMINISTRATION MISSION : 2002-32 AGENCY : IOS, Ocean Science and Productivity. Sidney, BC COUNTRY : Canada PROJECT : Nestucca SCIENTIST : Yelland D. PLATFORM : John P. Tully *LOCATION GEOGRAPHIC AREA : N.E. Pacific STATION : B3 EVENT NUMBER : 107 LATITUDE : 48 51.08000 N ! (deg min) LONGITUDE : 125 39.14000 W ! (deg min) WATER DEPTH : 53 *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-911plus SERIAL NUMBER : 0550 $TABLE: SENSORS ! Name Abs Depth Serial No ! ------------------------- -------------- ---------- temperature:primary ' ' 2371 conductivity:primary ' ' 2399 pressure ' ' 75636 temperature:secondary ' ' 2663 conductivity:secondary ' ' 2424 Fluorometer ' ' Seapoint transmissometer:primary ' ' 498DR irradiance ' ' 4601 surface ' ' 'degrees = 0.0' $END $REMARKS SOFTWARE VERSION SEASAVE WIN32 V 5.26D $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- SBE_IOS 2.2 2002/11/30 14:05:41 7859 7859 SHIFTDAT 3.2 2002/12/02 13:18:11 ? ? SHIFTDAT 3.2 2002/12/02 13:23:56 ? ? CLEAN 3.9 2002/12/02 13:35:19 7859 7859 DELETE 5.3 2002/12/02 13:40:23 7859 1382 CTDEDIT 4.43 2002/12/06 09:31:26 1382 1252 BOXCAR 4.2 2002/12/06 11:47:01 1252 1252 BINAVE 4.0.1 2002/12/06 15:12:04 1252 43 CALIB 10.4 2002/12/06 17:27:14 43 43 REMOVECH 6.0 2002/12/08 12:54:47 43 43 REORDER 1.2.1 2002/12/08 13:03:27 ? ? HDREDIT2 1.5 2002/12/08 13:32:03 ? ? CALIB 11.4 2004/12/22 08:48:21 43 43 CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:26:55 43 43 $END $REMARKS -The following SHIFT parameters were used. Shift Channel: Conductivity:Primary # of Records to Advance (-ve for Delay): At REC# 0 Shift= -0.40 Salinity was recalculated after shift -The following SHIFT parameters were used. Shift Channel: Conductivity:Secondary # of Records to Advance (-ve for Delay): At REC# 0 Shift= -0.40 Salinity was recalculated after shift CLEAN functions: - Interpolation by Record Number. -The following DELETE parameters were used: Surface Record Removal: Low Sal & Last Press Min Maximum Surface Pressure (relative): 10.00 Minimum Surface Salinity: 20.000 Surface Swell Pressure Tolerance: 1.00 Pressure filtered over width: 15 Swells deleted. Warning message if pressure difference of 2.00 Drop rates< 0.30m/s (calculated over 11 points) will be deleted Sample interval (from FILE section of header) = 0.042 seconds. -The following FILTER parameters were used. Median filter was used. Filter width = 11 The following channel(s) were filtered. Chlorophyll:Fluorescence:Seapoint -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 1.0 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CALIB parameters were used: Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = Q:\CTD\2002-30\2002-32_rcal.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 11 Salinity:T0:C0 PSS-78 10 -0.4800000E-02 0.1000000E+01 12 Salinity:T1:C1 PSS-78 10 -0.7300000E-02 0.1000000E+01 -The following CHANNEL(S) were removed from file. Scan_Number Temperature:Secondary Conductivity:Primary Conductivity:Secondary Irradiance (PAR) Irradiance (PAR:Surface Salinity:T1:C1 Flag -The following CALIB parameters were used: Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = Q:\Cruise_Data\RICKER recal\2002-32\2002-32-RECAL2.CCF Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 5 Salinity:T0:C0 PSS-78 10 0.7800000E-02 0.1000000E+01 $END *COMMENTS SBE HEADER Sea-Bird SBE 9 Data File: FileName = D:\data\2002-32\2002-32-0107.dat Software Version Seasave Win32 V 5.26d Temperature SN = 2371 Conductivity SN = 2399 Number of Bytes Per Scan = 30 Number of Voltage Words = 4 Number of Scans Averaged by the Deck Unit = 1 System UpLoad Time = Sep 23 2002 20:05:33 NMEA Latitude = 48 51.08 N NMEA Longitude = 125 39.14 W NMEA UTC (Time) = 20:05:03 Store Lat/Lon Data = Add to Header Only Ship: Tully Cruise: 2002-32 Station: B3 Depth: 53 Latitude: Longitude: # nquan = 13 # nvalues = 7859 # units = specified # name 0 = scan: Scan Count # name 1 = prDM: Pressure, Digiquartz [db] # name 2 = t090C: Temperature [ITS-90, deg C] # name 3 = t190C: Temperature, 2 [ITS-90, deg C] # name 4 = c0S/m: Conductivity [S/m] # name 5 = c1S/m: Conductivity, 2 [S/m] # name 6 = xmiss: Beam Transmission, Chelsea/Seatech/Wetlab CStar [%] # name 7 = flSP: Fluorescence, Seapoint # name 8 = par: PAR/Irradiance, Biospherical/Licor # name 9 = spar: SPAR/Surface Irradiance # name 10 = sal00: Salinity [PSU] # name 11 = sal11: Salinity, 2 [PSU] # name 12 = flag: flag # span 0 = 1, 7859 # span 1 = 0.135, 43.948 # span 2 = 8.8171, 13.8356 # span 3 = 8.8180, 14.2468 # span 4 = 0.044878, 3.680651 # span 5 = 0.835998, 3.703866 # span 6 = 38.3902, 93.0221 # span 7 = 1.7216e-01, 2.0806e+00 # span 8 = 1.8100e-01, 1.8100e-01 # span 9 = 0.0000e+00, 0.0000e+00 # span 10 = 0.2827, 32.6304 # span 11 = 6.0103, 32.6321 # span 12 = 0.0000e+00, 0.0000e+00 # interval = seconds: 0.0416667 # start_time = Sep 23 2002 20:05:33 # bad_flag = -9.990e-29 # sensor 0 = Frequency 0 temperature, primary, 2371, 16-Apr-02s # sensor 1 = Frequency 1 conductivity, primary, 2399, 16-Apr-02s, cpcor = -9.5 700e-08 # sensor 2 = Frequency 2 pressure, 75636, 04-06-1999 # sensor 3 = Frequency 3 temperature, secondary, 2663, 18-Apr-02s # sensor 4 = Frequency 4 conductivity, secondary, 2424, 16-Apr-02s, cpcor = -9 .5700e-08 # sensor 5 = Extrnl Volt 0 Fluorometer, Seapoint # sensor 6 = Extrnl Volt 2 transmissometer, primary, 498DR, 2002-08-23 # sensor 7 = Extrnl Volt 4 irradiance (PAR), 4601, 2002-07-22 # sensor 8 = Extrnl Volt 7 surface irradiance (SPAR), degrees = 0.0 # datcnv_date = Nov 12 2002 14:43:02, 5.25b # datcnv_in = Q:\CTD\2002-32\Ctd\2002-32-0107.dat Q:\CTD\2002-32\Ctd\2002-32-000 0.CON # datcnv_skipover = 0 # wildedit_date = Nov 12 2002 15:16:41, 5.25b # wildedit_in = Q:\CTD\2002-32\convert\2002-32-0107.cnv # wildedit_pass1_nstd = 2.0 # wildedit_pass2_nstd = 5.0 # wildedit_pass2_mindelta = 0.000e+000 # wildedit_npoint = 50 # wildedit_vars = prDM # wildedit_excl_bad_scans = yes # celltm_date = Nov 12 2002 16:40:53, 5.25b # celltm_in = Q:\CTD\2002-32\wildedit\2002-32-0107.cnv # celltm_alpha = 0.0200, 0.0000 # celltm_tau = 7.0000, 0.0000 # celltm_temp_sensor_use_for_cond = primary, # Derive_date = Nov 12 2002 16:47:28, 5.25b # Derive_in = Q:\CTD\2002-32\celltm\2002-32-0107.cnv Q:\CTD\2002-32\Ctd\2002-32- 0000.CON # file_type = ascii END* CTDEDIT was used to remove records corrupted by shed wakes and to clean salinity. *CALIBRATION $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------------- -------- ---- ------ ------------ Salinity:T0:C0 PSS-78 10 -9.9 () (-0.48E-02 1) Salinity:T1:C1 PSS-78 10 -9.9 () (-0.73E-02 1) Salinity:T0:C0 PSS-78 10 -9.9 () (0.78E-02 1) $END !--1--- ---2---- --3--- ---4--- ---5---- -6-- !Pressu Temperat Transm Fluores Salinity Numb !re ure: issivi cence: :T0:C0 er_o ! Primary ty URU: ~bin ! Seapoin _rec ! t ords !------ -------- ------ ------- -------- ---- *END OF HEADER 2.3 11.9942 34.9 0.861 31.7942 18. 3.0 11.8411 35.0 0.875 31.7970 51. 4.0 11.7219 35.5 0.904 31.7999 26. 5.0 11.6881 36.0 0.909 31.7993 22. 6.0 11.3660 36.3 0.929 31.8072 24. 6.9 10.7330 37.2 0.953 31.8708 24. 8.2 10.4124 39.4 1.068 31.8581 26. 9.0 10.1842 39.4 1.167 31.8993 32. 10.0 10.0709 39.1 1.317 31.9271 29. 11.0 9.9560 39.6 1.462 31.9581 27. 12.0 9.8674 40.1 1.592 31.9867 24. 13.0 9.8156 40.2 1.725 32.0062 29. 14.0 9.7168 40.9 1.867 32.0518 47. 15.0 9.6104 42.1 1.933 32.1506 34. 16.0 9.5235 43.2 1.918 32.1956 29. 17.0 9.4804 44.8 1.896 32.2100 28. 18.0 9.4665 45.7 1.801 32.2158 27. 19.0 9.4647 46.5 1.656 32.2172 29. 20.0 9.4556 47.5 1.560 32.2225 40. 21.0 9.4372 48.1 1.557 32.2334 42. 22.0 9.4176 48.5 1.485 32.2439 28. 23.0 9.4055 49.0 1.424 32.2517 26. 24.0 9.3915 49.5 1.346 32.2604 36. 25.0 9.3758 50.6 1.321 32.2717 44. 26.0 9.3310 51.1 1.282 32.2997 29. 27.0 9.2773 51.6 1.185 32.3227 23. 28.0 9.2173 52.0 1.127 32.3632 23. 29.0 9.1910 52.5 1.006 32.3974 29. 30.0 9.1909 53.2 0.925 32.4207 23. 30.9 9.1698 54.0 0.826 32.4666 32. 32.0 9.1513 54.5 0.721 32.4800 23. 33.0 9.1252 54.9 0.631 32.5183 22. 34.1 9.0641 55.2 0.577 32.5413 32. 35.1 9.0535 55.5 0.505 32.5427 28. 36.0 9.0391 55.5 0.492 32.5463 26. 37.0 9.0316 55.6 0.475 32.5520 22. 38.0 9.0012 55.6 0.494 32.5779 27. 38.8 8.9820 55.5 0.522 32.5917 23. 40.0 8.8889 55.7 0.424 32.6083 48. 41.0 8.8555 55.7 0.411 32.6154 34. 42.0 8.8342 55.7 0.390 32.6222 28. 43.0 8.8237 55.6 0.363 32.6252 30. 43.7 8.8174 55.4 0.505 32.6267 8.