*2013/12/16 15:26:37.67 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : UTC 2002/08/28 23:44:52.000 TIME INCREMENT : 0 0 0 0.416667E-01 0 ! (day hr min sec ms) NUMBER OF RECORDS : 38 DATA DESCRIPTION : CTD FILE TYPE : ASCII NUMBER OF CHANNELS : 8 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- --------------------------- --------------- -------------- -------------- 1 Pressure decibar 1.9 39.6 2 Temperature:Primary 'deg C (ITS90)' 8.4647 15.3382 3 Transmissivity %/metre 0.4 51.2 4 Fluorescence:URU:Seapoint mg/m^3 0.225 4.635 5 Oxygen:Dissolved:SBE mL/L 3.629 7.88 6 Salinity:T0:C0 PSS-78 15.5939 31.0744 7 Number_of_bin_records n/a 19 77 8 Oxygen:Dissolved:SBE umol/kg 158.2 344.7 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -9.9 ' ' 7 F ' ' 1 2 -9.9 ' ' 9 F ' ' 4 3 -9.9 ' ' 7 F ' ' 1 4 -9.9 ' ' 8 F ' ' 3 5 -9.9 ' ' 8 F ' ' 3 6 -9.9 ' ' 9 F ' ' 4 7 ' ' ' ' 5 F ' ' 0 8 -9.9 ' ' 6 F ' ' 1 $END $REMARKS This file converted from Sea-Bird file: Q:\CTD\2002-28\ctd\derive\2002-28-001 Comments from secondary file: Q:\CTD\2002-28\ctd\ios\2002-28-0011.de1 --------------------------------------------------------------------- This file converted from Sea-Bird file: Q:\CTD\2002-28\ctd\derive\2002-28-001 $END *ADMINISTRATION MISSION : 2002-28 AGENCY : IOS, Ocean Science and Productivity. Sidney, BC COUNTRY : Canada PROJECT : BC Inlets SCIENTIST : Stucchi D. PLATFORM : Vector *LOCATION GEOGRAPHIC AREA : BC Inlets STATION : PEDO EVENT NUMBER : 11 LATITUDE : 50 40.26000 N ! (deg min) LONGITUDE : 126 28.95000 W ! (deg min) WATER DEPTH : 48 *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-911plus SERIAL NUMBER : 0585 $TABLE: SENSORS ! Name Abs Depth Serial No ! ------------------------- -------------- ---------- temperature:primary ' ' 2023 conductivity:primary ' ' 1763 pressure ' ' 77511 temperature:secondary ' ' 2106 conductivity:secondary ' ' 1764 Fluorometer ' ' Seapoint transmissometer:primary ' ' 333DR Oxygen:SBE ' ' 0047 $END $REMARKS SOFTWARE VERSION SEASAVE WIN32 V 5.26C Comments from secondary file: Q:\CTD\2002-28\ctd\ios\2002-28-0011.de1 --------------------------------------------------------------------- SOFTWARE VERSION SEASAVE WIN32 V 5.26C $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- SBE_IOS 2.2 2002/12/12 14:59:40 14070 14070 CLEAN 3.9 2002/12/13 14:13:27 14070 14070 SHIFTDAT 3.2a 2002/12/14 13:10:04 ? ? DELETE 5.3 2002/12/14 13:20:40 14070 1240 CTDEDIT 4.43 2002/12/14 14:36:50 1240 1084 MERGE 2.8 2003/01/16 10:15:45 1084 1084 BOXCAR 4.2 2003/01/16 12:00:25 1084 1084 BINAVE 4.0.1 2003/01/16 12:07:38 1084 38 CALIB 10.4 2003/01/16 12:09:49 38 38 REMOVECH 6.0 2003/01/16 12:10:39 38 38 REORDER 1.2.1 2003/01/16 12:11:09 ? ? CHGUNITS 1.3 2003/01/16 15:57:38 38 38 CLEAN 4.1 2003/01/21 09:08:08 ? ? HDREDIT2 1.51 2003/01/21 09:09:27 ? ? CALIB 11.1 2003/08/12 16:11:18 38 38 HDREDIT2 2.1 2004/05/25 13:58:50 ? ? CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:26:37 38 38 $END $REMARKS CLEAN functions: - Reset #RECS, MIN & MAX values in header. - Interpolation by Record Number. -The following SHIFT parameters were used. Shift Channel: Conductivity:Primary # of Records to Advance (-ve for Delay): At REC# 0 Shift= -0.40 Salinity was recalculated after shift -The following DELETE parameters were used: Surface Record Removal: Last Press Min Maximum Surface Pressure (relative): 10.00 Surface Swell Pressure Tolerance: 1.00 Pressure filtered over width: 15 Swells deleted. Warning message if pressure difference of 2.00 Slow Drop Rate NOT deleted -The following MERGE parameters were used: Merge Channel: Scan_Number Merge Scheme Used: Interpolate Secondary onto Primary Overlap Scheme Used: Keep Primary Primary Channels to Include: ALL Secondary Channels to Include: Salinity:T0:C0 Primary file : Q:\CTD\2002-28\ctd\ios\2002-28-0011.edt Secondary file: Q:\CTD\2002-28\ctd\ios\2002-28-0011.de1 Comments from secondary file: Q:\CTD\2002-28\ctd\ios\2002-28-0011.de1 --------------------------------------------------------------------- CLEAN functions: - Reset #RECS, MIN & MAX values in header. - Interpolation by Record Number. -The following SHIFT parameters were used. Shift Channel: Oxygen:Dissolved:SBE # of Records to Advance (-ve for Delay): At REC# 0 Shift=240.00 Salinity was recalculated after shift -The following DELETE parameters were used: Surface Record Removal: Last Press Min Maximum Surface Pressure (relative): 10.00 Surface Swell Pressure Tolerance: 1.00 Pressure filtered over width: 15 Swells deleted. Warning message if pressure difference of 2.00 Slow Drop Rate NOT deleted. Sample interval (from user input) = 0.000 seconds. -The following FILTER parameters were used. Median filter was used. Filter width = 11 The following channel(s) were filtered. Fluorescence:URU:Seapoint -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 1.0 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CALIB parameters were used: Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = Q:\CTD\2002-28\2002-28_rcal.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 9 Oxygen:Dissolved:SBE mL/L 10 0.9300000E-01 0.1000000E+01 -The following CHANNEL(S) were removed from file. Scan_Number Temperature:Secondary Conductivity:Primary Conductivity:Secondary Salinity:T1:C1 Flag CHANGE units: - Units changed from ml/l to umol/kg CLEAN functions: - Remove Sea-Bird comments from the header. -The following CALIB parameters were used: Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = L:\CRUISE_DATA\2002\2002-16\DOC\2002-16Tempcorr.CCF Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 2 Temperature:Primary deg C (IT 10 -0.2700000E-02 0.1000000E+01 $END *COMMENTS CTDEDIT was used to remove records near the bottom of the cast. Comments from secondary file: Q:\CTD\2002-28\ctd\ios\2002-28-0011.de1 --------------------------------------------------------------------- SBE HEADER Sea-Bird SBE 9 Data File: FileName = C:\data\2002-28\2002-28-0011.dat Software Version Seasave Win32 V 5.26c Temperature SN = 2023 Conductivity SN = 1763 Number of Bytes Per Scan = 27 Number of Voltage Words = 3 Number of Scans Averaged by the Deck Unit = 1 System UpLoad Time = Aug 28 2002 23:44:52 NMEA Latitude = 50 40.26 N NMEA Longitude = 126 28.95 W NMEA UTC (Time) = Aug 28 2002 23:44:52 Store Lat/Lon Data = Add to Header Only Ship: Vector Cruise: 2002-28 Station: PEDO Depth: 48 # nquan = 12 # nvalues = 14070 # units = specified # name 0 = scan: Scan Count # name 1 = prDM: Pressure, Digiquartz [db] # name 2 = t090C: Temperature [ITS-90, deg C] # name 3 = t190C: Temperature, 2 [ITS-90, deg C] # name 4 = c0S/m: Conductivity [S/m] # name 5 = c1S/m: Conductivity, 2 [S/m] # name 6 = xmiss: Beam Transmission, Chelsea/Seatech/Wetlab CStar [%] # name 7 = flSP: Fluorescence, Seapoint # name 8 = sbeox0ML/L: Oxygen, SBE 43 [ml/l] # name 9 = sal00: Salinity [PSU] # name 10 = sal11: Salinity, 2 [PSU] # name 11 = flag: flag # span 0 = 1, 14070 # span 1 = 1.064, 39.814 # span 2 = 8.4555, 16.2021 # span 3 = 8.4494, 16.1256 # span 4 = 1.699276, 3.295968 # span 5 = 1.720030, 3.295861 # span 6 = 18.5805, 85.2412 # span 7 = 1.7949e-01, 1.3425e+01 # span 8 = 3.29242, 8.02294 # span 9 = 12.2602, 31.0987 # span 10 = 12.4394, 31.1039 # span 11 = 0.0000e+00, 0.0000e+00 # interval = seconds: 0.0416667 # start_time = Aug 28 2002 23:44:52 # bad_flag = -9.990e-29 # sensor 0 = Frequency 0 temperature, primary, 2023, 03-May-02s # sensor 1 = Frequency 1 conductivity, primary, 1763, 23-Apr-02s, cpcor = -9.5 700e-08 # sensor 2 = Frequency 2 pressure, 77511, 30-Sep-99 # sensor 3 = Frequency 3 temperature, secondary, 2106, 19-Apr-02s # sensor 4 = Frequency 4 conductivity, secondary, 1764, 23-Apr-02s, cpcor = -9 .5700e-08 # sensor 5 = Extrnl Volt 0 Fluorometer, Seapoint # sensor 6 = Extrnl Volt 2 transmissometer, primary, 333DR, 07-Aug-02 # sensor 7 = Extrnl Volt 4 Oxygen, SBE, primary, 0047, 21-Aug-02 # datcnv_date = Dec 12 2002 12:47:14, 5.25b # datcnv_in = Q:\CTD\2002-28\CTD\2002-28-0011.dat Q:\CTD\2002-28\CTD\0585.CON # datcnv_skipover = 0 # wildedit_date = Dec 12 2002 13:10:44, 5.25b # wildedit_in = Q:\CTD\2002-28\CTD\convert\2002-28-0011.cnv # wildedit_pass1_nstd = 2.0 # wildedit_pass2_nstd = 5.0 # wildedit_pass2_mindelta = 0.000e+000 # wildedit_npoint = 50 # wildedit_vars = prDM # wildedit_excl_bad_scans = yes # celltm_date = Dec 12 2002 14:38:13, 5.25b # celltm_in = Q:\CTD\2002-28\CTD\wildedit\2002-28-0011.cnv # celltm_alpha = 0.0300, 0.0300 # celltm_tau = 9.0000, 9.0000 # celltm_temp_sensor_use_for_cond = primary, secondary # Derive_date = Dec 12 2002 14:46:07, 5.25b # Derive_in = Q:\CTD\2002-28\CTD\celltm\2002-28-0011.cnv Q:\CTD\2002-32\Ctd\2002 -32-0000.CON # file_type = ascii END* ******************************************************************************** Fluorescence:URU:Seapoint - The secondary pump was not operating properly, but the problem is believed to be significant only below 250m. The data is nominal. Oxygen:Dissolved:SBE - This channel was processed by shifting +240 records with respect to pressure. An offset of +0.093 ml/l was applied based on bottle comparisons. The comparison of bottles with downcast data has large standard deviations suggesting errors on the order of: · ±0.3 ml/l from 0 to 150m · ±0.15 ml/l from 150m to 200m · ±0.06 ml/l below 200m. ******************************************************************************** *CALIBRATION $TABLE: CORRECTED CHANNELS !Name Units Fmla Pad Coefficients !---------------------- --------------- ---- ------ ------------ Oxygen:Dissolved:SBE mL/L 10 -9.9 () (0.93E-01 1) Temperature:Primary 'deg C (ITS90)' 10 -9.9 () (-0.27E-02 1) $END !--1--- ---2---- --3--- ---4--- ---5--- ---6---- -7-- --8-- !Pressu Temperat Transm Fluores Oxygen: Salinity Numb Oxyge !re ure: issivi cence: Dissolv :T0:C0 er_o n: ! Primary ty URU: ed:SBE ~bin Disso ! Seapoin _rec lved: ! t ords SBE !------ -------- ------ ------- ------- -------- ---- ----- *END OF HEADER 1.9 15.3382 19.6 2.626 7.795 15.5939 77. 344.2 3.0 14.8890 19.4 2.548 7.787 17.3817 33. 343.4 4.0 13.3251 10.5 2.860 7.824 21.8137 33. 343.7 5.0 11.1840 0.9 3.733 7.880 27.2103 27. 344.7 6.0 10.3781 0.4 4.635 7.794 28.5172 19. 340.5 7.0 10.0671 9.2 3.715 7.585 28.9360 21. 331.3 8.0 9.9129 29.1 2.580 7.280 29.1277 23. 317.9 9.0 9.7607 39.8 1.848 6.928 29.3163 23. 302.5 10.0 9.6477 44.1 1.524 6.574 29.4486 25. 287.0 11.0 9.5648 45.3 1.742 6.243 29.5623 26. 272.5 12.0 9.4530 47.0 1.590 5.962 29.7262 27. 260.2 13.0 9.2996 47.7 1.171 5.728 29.9264 27. 249.9 14.0 9.1719 48.3 0.870 5.523 30.0870 27. 241.0 15.0 9.0647 49.4 0.880 5.338 30.2332 26. 232.9 16.0 8.9717 50.4 0.731 5.165 30.3656 27. 225.3 17.0 8.9502 50.7 0.635 5.002 30.3944 26. 218.2 18.0 8.8634 50.7 0.549 4.847 30.4944 26. 211.4 19.0 8.7804 51.2 0.452 4.698 30.6015 26. 204.9 20.0 8.7136 51.1 0.465 4.562 30.6916 27. 198.9 21.0 8.7025 51.0 0.412 4.452 30.7067 25. 194.1 22.0 8.6956 50.4 0.363 4.365 30.7184 25. 190.3 23.0 8.6908 50.8 0.374 4.292 30.7289 25. 187.1 24.0 8.6553 50.6 0.308 4.233 30.7780 25. 184.6 25.0 8.6111 50.6 0.345 4.183 30.8476 26. 182.4 26.0 8.5886 50.5 0.287 4.139 30.8779 24. 180.5 27.0 8.5724 50.4 0.308 4.097 30.9009 25. 178.6 28.0 8.5534 49.8 0.270 4.056 30.9240 26. 176.8 29.0 8.5432 50.1 0.281 4.013 30.9383 25. 175.0 30.0 8.5398 45.1 0.235 3.970 30.9448 25. 173.1 31.0 8.5353 48.7 0.293 3.930 30.9534 25. 171.3 32.0 8.5246 48.8 0.322 3.893 30.9735 26. 169.7 33.0 8.5152 48.8 0.225 3.858 30.9895 26. 168.2 34.0 8.5098 48.5 0.297 3.827 30.9966 26. 166.8 35.0 8.5007 47.8 0.272 3.800 31.0106 28. 165.7 36.0 8.4866 46.1 0.296 3.769 31.0250 36. 164.3 37.0 8.4767 43.6 0.459 3.726 31.0380 47. 162.4 37.9 8.4697 41.8 0.424 3.665 31.0503 46. 159.8 39.6 8.4647 48.7 0.373 3.629 31.0744 27. 158.2