*2013/12/16 15:25:57.13 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : UTC 2002/06/25 18:25:00.000 TIME INCREMENT : 0 0 0 0.5 0 ! (day hr min sec ms) NUMBER OF RECORDS : 55 DATA DESCRIPTION : CTD FILE TYPE : ASCII DATA TYPE : REAL*4 NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- --------------- -------------- -------------- 1 Pressure decibar 2.22 55.522 2 Temperature:Primary 'deg C (ITS90)' 7.0983 8.3505 3 Salinity:T0:C0 PSS-78 32.00417 32.411 4 Number_of_bin_records n/a 1 5 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -9.9 ' ' 9 F ' ' 1 2 -9.9 ' ' 9 F ' ' 4 3 -9.9 ' ' 9 F ' ' 4 4 ' ' ' ' 5 F ' ' 0 $END $REMARKS This file converted from Sea-Bird file: Q:\CTD\2002-15\derive\2002-15-0120.cn $END *ADMINISTRATION MISSION : 2002-15 AGENCY : PBS, Ocean Science and Productivity, Nanaimo, B.C. COUNTRY : Canada PROJECT : High Seas Salmon SCIENTIST : Morris J. PLATFORM : Ocean Selector *LOCATION GEOGRAPHIC AREA : N W Pacific STATION : DE03 EVENT NUMBER : 120 LATITUDE : 54 10.18900 N ! (deg min) LONGITUDE : 131 53.18400 W ! (deg min) *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-19 SERIAL NUMBER : 1294 $TABLE: SENSORS ! Name Abs Depth Serial No ! ---- -------------- ---------- ' ' ' ' ' ' $END $REMARKS SOFTWARE VERSION 1.30 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- SBE_IOS 2.2 2002/09/05 16:49:48 914 914 HDREDIT2 1.5 2002/09/15 13:29:32 ? ? CLEAN 3.9 2002/09/15 15:28:23 913 913 DELETE 5.3 2002/09/16 15:38:30 913 182 CTDEDIT 4.43 2002/09/17 12:06:50 182 177 BINAVE 4.0.1 2002/09/17 16:42:32 177 55 REMOVECH 6.0 2002/09/18 14:42:50 55 55 REORDER 1.2 2002/09/18 14:42:59 ? ? HDREDIT2 1.5 2002/09/18 14:44:20 ? ? HDREDIT2 2.1 2004/05/27 11:05:33 ? ? CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:25:57 55 55 $END $REMARKS CLEAN functions: - Reset #RECS, MIN & MAX values in header. - Interpolation by Record Number. - Set event to last 4 characters of file name -The following DELETE parameters were used: Surface Record Removal: Last Press Min Maximum Surface Pressure (relative): 10.00 Surface Swell Pressure Tolerance: 1.00 Pressure filtered over width: 5 Swells deleted. Warning message if pressure difference of 2.00 Drop rates< 0.30m/s (calculated over 5 points) will be deleted Sample interval (from FILE section of header) = 0.500 seconds. -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 1.0 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CHANNEL(S) were removed from file. Conductivity:Primary Flag $END *COMMENTS SBE HEADER Sea-Bird SBE 19 Data File: FileName = C:\Program Files\Sea-Bird\SEATERM\de03200215001.hex Software Version 1.30 Temperature SN = 1294 Conductivity SN = 1294 System UpLoad Time = Mar 28 2000 22:42:46 ds SEACAT PROFILER V3.0c SN 1294 06/25/02 17:56:16.094 strain gauge pressure sensor: S/N = 163223, range = 1,000 psia, tc = -44 clk = 32767.883 iop = 163 vmain = 11.5 vlith = 5.2 mode = PROFILE ncasts = 1 sample rate = 1 scan every 0.5 seconds minimum raw conductivity frequency for pump turn on = 10 hertz pump delay = 45 seconds samples = 914 free = 85831 lwait = 0 msec SW1 = 90 battery cutoff = 7.2 volts number of voltages sampled = 0 logdata = NO * S> dh cast 0 06/25 17:29:48 samples 0 to 913 sample rate = 1 scan every 0.5 seco nds stop = switch off S> # nquan = 6 # nvalues = 914 # units = specified # name 0 = scan: Scan Count # name 1 = prSM: Pressure, Strain Gauge [db] # name 2 = t090C: Temperature [ITS-90, deg C] # name 3 = c0S/m: Conductivity [S/m] # name 4 = sal00: Salinity [PSU] # name 5 = flag: flag # span 0 = 1, 914 # span 1 = -0.539, 55.653 # span 2 = 7.0921, 10.8935 # span 3 = 0.011196, 3.400752 # span 4 = 0.0735, 32.4202 # span 5 = 0.0000e+00, 0.0000e+00 # interval = seconds: 0.5 # start_time = Jun 25 2000 17:29:48 # bad_flag = -9.990e-29 # sensor 0 = Frequency 0 temperature, 1294, 17-jun-99 # sensor 1 = Frequency 1 conductivity, 1294, 17-jun-99, cpcor = -9.5700e-08 # sensor 2 = Pressure Voltage, 1294, 17-jun-99 # datcnv_date = Sep 05 2002 13:37:18, 5.25b # datcnv_in = Q:\CTD\2002-15\de03200215001.hex Q:\CTD\2002-15\2002-15.CON # datcnv_skipover = 0 # filter_date = Sep 05 2002 15:19:54, 5.25b # filter_in = Q:\CTD\2002-15\convert\2002-15-0120.cnv # filter_low_pass_tc_A = 0.500 # filter_low_pass_tc_B = 2.000 # filter_low_pass_A_vars = c0S/m # filter_low_pass_B_vars = prSM # alignctd_date = Sep 05 2002 16:32:57, 5.25b # alignctd_in = Q:\CTD\2002-15\FILTER\2002-15-0120.cnv # alignctd_adv = t090C 0.700 # Derive_date = Sep 05 2002 16:33:30, 5.25b # Derive_in = Q:\CTD\2002-15\align\2002-15-0120.cnv Q:\CTD\2002-16\ctd\0585CTD.C ON # file_type = ascii END* CTDEDIT was used to remove 4 records at the surface. *******WARNING*********** SeaCat salinity is prone to error due to mismatch of conductivity and temperature response times especially when the descent rate is non-uniform. These errors are likely to be much larger than calibration errors. Salinity for this cruise has been edited extensively, but errors as high as 0.05units of salinity are likely in areas of high gradient and unsteady descent rate. ************************ !---1---- ---2---- ---3---- -4-- !Pressure Temperat Salinity Numb ! ure: :T0:C0 er_o ! Primary ~bin ! _rec ! ords !-------- -------- -------- ---- *END OF HEADER 2.2 8.3505 32.0063 2. 3.0 8.3474 32.0064 4. 4.0 8.3502 32.0057 3. 4.9 8.3487 32.0047 3. 5.9 8.3438 32.0042 3. 7.0 8.3395 32.0043 4. 8.1 8.3314 32.0060 3. 9.1 8.3251 32.0101 3. 10.0 8.3182 32.0128 3. 11.0 8.3123 32.0168 3. 12.0 8.3148 32.0161 4. 13.1 8.3123 32.0171 3. 14.1 8.3028 32.0203 3. 15.1 8.2940 32.0252 3. 16.0 8.2990 32.0234 3. 17.0 8.2896 32.0278 3. 17.9 8.2534 32.0469 3. 18.9 8.2343 32.0513 3. 20.0 8.1561 32.0808 4. 21.1 8.1276 32.0981 3. 22.0 8.1044 32.1033 3. 23.0 8.0450 32.1193 3. 23.9 7.9843 32.1342 3. 25.0 7.9083 32.1530 4. 26.1 7.8640 32.1686 3. 27.1 7.8278 32.1776 3. 28.0 7.7909 32.1860 3. 28.9 7.7623 32.1930 3. 29.9 7.7423 32.1993 3. 31.0 7.7067 32.2075 4. 32.0 7.6710 32.2169 3. 32.9 7.6302 32.2301 3. 34.0 7.5939 32.2383 4. 35.1 7.5548 32.2489 3. 36.0 7.5329 32.2574 3. 37.0 7.5109 32.2617 4. 38.1 7.4786 32.2665 3. 39.0 7.4305 32.2784 3. 39.9 7.4046 32.2881 3. 41.0 7.3784 32.2944 4. 42.0 7.3498 32.3035 3. 42.9 7.3408 32.3086 3. 44.0 7.3309 32.3116 4. 45.0 7.3180 32.3149 3. 45.9 7.3039 32.3202 3. 47.0 7.2908 32.3266 4. 48.0 7.2780 32.3323 3. 48.9 7.2682 32.3351 3. 50.0 7.2584 32.3396 4. 51.1 7.2497 32.3435 3. 51.9 7.2356 32.3485 3. 53.0 7.2011 32.3631 4. 54.0 7.1590 32.3845 3. 55.0 7.1212 32.3993 5. 55.5 7.0983 32.4110 1.