*2013/12/16 15:25:56.77 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : UTC 2002/06/20 14:00:00.000 TIME INCREMENT : 0 0 0 0.5 0 ! (day hr min sec ms) NUMBER OF RECORDS : 49 DATA DESCRIPTION : CTD FILE TYPE : ASCII DATA TYPE : REAL*4 NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- --------------- -------------- -------------- 1 Pressure decibar 2.1995 49.81967 2 Temperature:Primary 'deg C (ITS90)' 7.4202 11.75 3 Salinity:T0:C0 PSS-78 30.8379 32.65406 4 Number_of_bin_records n/a 2 4 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -9.9 ' ' 9 F ' ' 1 2 -9.9 ' ' 9 F ' ' 4 3 -9.9 ' ' 9 F ' ' 4 4 ' ' ' ' 5 F ' ' 0 $END $REMARKS This file converted from Sea-Bird file: Q:\CTD\2002-15\derive\2002-15-9907.cn $END *ADMINISTRATION MISSION : 2002-15 AGENCY : PBS, Ocean Science and Productivity, Nanaimo, B.C. COUNTRY : Canada PROJECT : High Seas Salmon SCIENTIST : Morris J. PLATFORM : Ocean Selector *LOCATION GEOGRAPHIC AREA : N W Pacific STATION : T05 EVENT NUMBER : 60 LATITUDE : 51 0.76000 N ! (deg min) LONGITUDE : 128 51.42200 W ! (deg min) *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-19 SERIAL NUMBER : 1294 $TABLE: SENSORS ! Name Abs Depth Serial No ! ---- -------------- ---------- ' ' ' ' ' ' $END $REMARKS SOFTWARE VERSION 1.30 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- SBE_IOS 2.2 2002/09/06 11:12:32 829 829 HDREDIT2 1.5 2002/09/15 13:29:29 ? ? CLEAN 3.9 2002/09/15 15:28:15 828 828 DELETE 5.3 2002/09/16 15:38:26 828 130 CTDEDIT 4.43 2002/09/17 10:02:16 130 126 BINAVE 4.0.1 2002/09/17 16:42:31 126 49 REMOVECH 6.0 2002/09/18 14:42:49 49 49 REORDER 1.2 2002/09/18 14:42:59 ? ? HDREDIT2 1.5 2002/09/18 14:44:19 ? ? HDREDIT2 2.1 2004/05/27 11:04:55 ? ? CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:25:56 49 49 $END $REMARKS CLEAN functions: - Reset #RECS, MIN & MAX values in header. - Interpolation by Record Number. - Set event to last 4 characters of file name -The following DELETE parameters were used: Surface Record Removal: Last Press Min Maximum Surface Pressure (relative): 10.00 Surface Swell Pressure Tolerance: 1.00 Pressure filtered over width: 5 Swells deleted. Warning message if pressure difference of 2.00 Drop rates< 0.30m/s (calculated over 5 points) will be deleted Sample interval (from FILE section of header) = 0.500 seconds. -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 1.0 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CHANNEL(S) were removed from file. Conductivity:Primary Flag $END *COMMENTS SBE HEADER Sea-Bird SBE 19 Data File: FileName = C:\Program Files\Sea-Bird\Seaterm\T05200215000.hex Software Version 1.30 Temperature SN = 1294 Conductivity SN = 1294 System UpLoad Time = Jun 20 2002 06:16:09 ds SEACAT PROFILER V3.0c SN 1294 06/20/02 13:22:14.473 strain gauge pressure sensor: S/N = 163223, range = 1,000 psia, tc = -44 clk = 32767.906 iop = 163 vmain = 11.5 vlith = 5.3 mode = PROFILE ncasts = 1 sample rate = 1 scan every 0.5 seconds minimum raw conductivity frequency for pump turn on = 10 hertz pump delay = 45 seconds samples = 829 free = 85916 lwait = 0 msec SW1 = 90 battery cutoff = 7.2 volts number of voltages sampled = 0 logdata = NO * S> dh cast 0 06/20 13:04:53 samples 0 to 828 sample rate = 1 scan every 0.5 seco nds stop = switch off S> # nquan = 6 # nvalues = 829 # units = specified # name 0 = scan: Scan Count # name 1 = prSM: Pressure, Strain Gauge [db] # name 2 = t090C: Temperature [ITS-90, deg C] # name 3 = c0S/m: Conductivity [S/m] # name 4 = sal00: Salinity [PSU] # name 5 = flag: flag # span 0 = 1, 829 # span 1 = -0.418, 50.078 # span 2 = 7.4194, 12.1261 # span 3 = 0.003092, 3.559912 # span 4 = 0.0221, 32.6601 # span 5 = 0.0000e+00, 0.0000e+00 # interval = seconds: 0.5 # start_time = Jun 20 2002 13:04:53 # bad_flag = -9.990e-29 # sensor 0 = Frequency 0 temperature, 1294, 17-jun-99 # sensor 1 = Frequency 1 conductivity, 1294, 17-jun-99, cpcor = -9.5700e-08 # sensor 2 = Pressure Voltage, 1294, 17-jun-99 # datcnv_date = Sep 05 2002 13:37:17, 5.25b # datcnv_in = Q:\CTD\2002-15\T05200215000.hex Q:\CTD\2002-15\2002-15.CON # datcnv_skipover = 0 # filter_date = Sep 06 2002 10:04:56, 5.25b # filter_in = Q:\CTD\2002-15\test\2002-15-9907.cnv # filter_low_pass_tc_A = 0.500 # filter_low_pass_tc_B = 2.000 # filter_low_pass_A_vars = c0S/m # filter_low_pass_B_vars = prSM # alignctd_date = Sep 06 2002 10:05:07, 5.25b # alignctd_in = Q:\CTD\2002-15\FILTER\2002-15-9907.cnv # alignctd_adv = t090C 0.700 # Derive_date = Sep 06 2002 10:05:41, 5.25b # Derive_in = Q:\CTD\2002-15\align\2002-15-9907.cnv Q:\CTD\2002-16\ctd\0585CTD.C ON # file_type = ascii END* CTDEDIT was used to remove 4 records at the surface and to clean salinity lightly. *******WARNING*********** SeaCat salinity is prone to error due to mismatch of conductivity and temperature response times especially when the descent rate is non-uniform. These errors are likely to be much larger than calibration errors. Salinity for this cruise has been edited extensively, but errors as high as 0.05units of salinity are likely in areas of high gradient and unsteady descent rate. ************************ !---1---- ---2---- ---3---- -4-- !Pressure Temperat Salinity Numb ! ure: :T0:C0 er_o ! Primary ~bin ! _rec ! ords !-------- -------- -------- ---- *END OF HEADER 2.2 11.7487 30.8405 2. 2.9 11.7493 30.8407 3. 3.9 11.7500 30.8379 3. 4.9 11.7191 30.8428 3. 6.0 11.2948 30.8970 3. 7.0 10.7493 31.0385 2. 8.1 10.2769 31.2768 3. 9.1 9.8625 31.5076 2. 10.1 9.6857 31.6062 3. 11.0 9.5993 31.6500 2. 12.0 9.4698 31.6917 3. 13.0 9.3478 31.7486 2. 14.0 9.2753 31.7702 3. 15.0 8.9251 31.8590 2. 16.0 8.5466 32.0408 3. 17.1 8.4054 32.1465 2. 17.9 8.3500 32.1963 2. 18.9 8.3081 32.2256 3. 20.0 8.2793 32.2446 3. 21.0 8.2594 32.2556 2. 22.0 8.2349 32.2675 3. 23.1 8.2101 32.2784 2. 24.0 8.1892 32.2882 2. 25.0 8.1692 32.2982 3. 26.0 8.1474 32.3068 2. 27.0 8.1244 32.3180 3. 28.0 8.1010 32.3294 2. 28.9 8.0752 32.3360 3. 29.9 8.0343 32.3483 2. 31.0 7.9708 32.3746 3. 32.0 7.9208 32.3970 2. 33.0 7.8603 32.4297 3. 34.1 7.8056 32.4583 2. 35.0 7.7616 32.4788 3. 36.0 7.7278 32.4921 2. 36.9 7.6803 32.5056 3. 38.0 7.5841 32.5451 3. 39.0 7.5325 32.5740 2. 40.1 7.5008 32.5955 3. 41.1 7.4748 32.6130 2. 42.1 7.4548 32.6280 3. 43.0 7.4446 32.6358 2. 44.0 7.4394 32.6394 3. 45.0 7.4363 32.6424 2. 46.0 7.4332 32.6451 3. 47.0 7.4304 32.6463 2. 48.0 7.4254 32.6489 3. 49.1 7.4207 32.6515 4. 49.8 7.4202 32.6541 3.