*2013/12/16 15:25:56.74 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : UTC 2002/06/20 03:34:00.000 TIME INCREMENT : 0 0 0 0.5 0 ! (day hr min sec ms) NUMBER OF RECORDS : 48 DATA DESCRIPTION : CTD FILE TYPE : ASCII DATA TYPE : REAL*4 NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- --------------- -------------- -------------- 1 Pressure decibar 2.447 48.581 2 Temperature:Primary 'deg C (ITS90)' 7.683434 11.2742 3 Salinity:T0:C0 PSS-78 31.1801 32.4062 4 Number_of_bin_records n/a 1 5 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -9.9 ' ' 9 F ' ' 1 2 -9.9 ' ' 9 F ' ' 4 3 -9.9 ' ' 9 F ' ' 4 4 ' ' ' ' 5 F ' ' 0 $END $REMARKS This file converted from Sea-Bird file: Q:\CTD\2002-15\derive\2002-15-0057.cn $END *ADMINISTRATION MISSION : 2002-15 AGENCY : PBS, Ocean Science and Productivity, Nanaimo, B.C. COUNTRY : Canada PROJECT : High Seas Salmon SCIENTIST : Morris J. PLATFORM : Ocean Selector *LOCATION GEOGRAPHIC AREA : N W Pacific STATION : T06 EVENT NUMBER : 57 LATITUDE : 50 55.91900 N ! (deg min) LONGITUDE : 128 59.76500 W ! (deg min) *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-19 SERIAL NUMBER : 1294 $TABLE: SENSORS ! Name Abs Depth Serial No ! ---- -------------- ---------- ' ' ' ' ' ' $END $REMARKS SOFTWARE VERSION 1.30 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- SBE_IOS 2.2 2002/09/05 16:49:41 744 744 HDREDIT2 1.5 2002/09/15 13:29:29 ? ? CLEAN 3.9 2002/09/15 15:28:15 743 743 DELETE 5.3 2002/09/16 15:38:26 743 140 CTDEDIT 4.43 2002/09/17 10:00:21 140 136 BINAVE 4.0.1 2002/09/17 16:42:31 136 48 REMOVECH 6.0 2002/09/18 14:42:49 48 48 REORDER 1.2 2002/09/18 14:42:59 ? ? HDREDIT2 1.5 2002/09/18 14:44:19 ? ? HDREDIT2 2.1 2004/05/27 11:04:53 ? ? CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:25:56 48 48 $END $REMARKS CLEAN functions: - Reset #RECS, MIN & MAX values in header. - Interpolation by Record Number. - Set event to last 4 characters of file name -The following DELETE parameters were used: Surface Record Removal: Last Press Min Maximum Surface Pressure (relative): 10.00 Surface Swell Pressure Tolerance: 1.00 Pressure filtered over width: 5 Swells deleted. Warning message if pressure difference of 2.00 Drop rates< 0.30m/s (calculated over 5 points) will be deleted Sample interval (from FILE section of header) = 0.500 seconds. -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 1.0 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CHANNEL(S) were removed from file. Conductivity:Primary Flag $END *COMMENTS SBE HEADER Sea-Bird SBE 19 Data File: FileName = C:\Program Files\Sea-Bird\Seaterm\T06200215000.hex Software Version 1.30 Temperature SN = 1294 Conductivity SN = 1294 System UpLoad Time = Jun 19 2002 19:51:52 ds SEACAT PROFILER V3.0c SN 1294 06/20/02 02:57:55.444 strain gauge pressure sensor: S/N = 163223, range = 1,000 psia, tc = -44 clk = 32767.922 iop = 163 vmain = 11.5 vlith = 5.3 mode = PROFILE ncasts = 1 sample rate = 1 scan every 0.5 seconds minimum raw conductivity frequency for pump turn on = 10 hertz pump delay = 45 seconds samples = 744 free = 86001 lwait = 0 msec SW1 = 90 battery cutoff = 7.2 volts number of voltages sampled = 0 logdata = NO * S> dh cast 0 06/20 02:39:47 samples 0 to 743 sample rate = 1 scan every 0.5 seco nds stop = switch off S> # nquan = 6 # nvalues = 744 # units = specified # name 0 = scan: Scan Count # name 1 = prSM: Pressure, Strain Gauge [db] # name 2 = t090C: Temperature [ITS-90, deg C] # name 3 = c0S/m: Conductivity [S/m] # name 4 = sal00: Salinity [PSU] # name 5 = flag: flag # span 0 = 1, 744 # span 1 = -0.344, 48.737 # span 2 = 7.6830, 13.4130 # span 3 = 0.012755, 3.581578 # span 4 = 0.0790, 32.4096 # span 5 = 0.0000e+00, 0.0000e+00 # interval = seconds: 0.5 # start_time = Jun 20 2002 02:39:47 # bad_flag = -9.990e-29 # sensor 0 = Frequency 0 temperature, 1294, 17-jun-99 # sensor 1 = Frequency 1 conductivity, 1294, 17-jun-99, cpcor = -9.5700e-08 # sensor 2 = Pressure Voltage, 1294, 17-jun-99 # datcnv_date = Sep 05 2002 13:37:17, 5.25b # datcnv_in = Q:\CTD\2002-15\T06200215000.hex Q:\CTD\2002-15\2002-15.CON # datcnv_skipover = 0 # filter_date = Sep 05 2002 15:19:50, 5.25b # filter_in = Q:\CTD\2002-15\convert\2002-15-0057.cnv # filter_low_pass_tc_A = 0.500 # filter_low_pass_tc_B = 2.000 # filter_low_pass_A_vars = c0S/m # filter_low_pass_B_vars = prSM # alignctd_date = Sep 05 2002 16:32:54, 5.25b # alignctd_in = Q:\CTD\2002-15\FILTER\2002-15-0057.cnv # alignctd_adv = t090C 0.700 # Derive_date = Sep 05 2002 16:33:28, 5.25b # Derive_in = Q:\CTD\2002-15\align\2002-15-0057.cnv Q:\CTD\2002-16\ctd\0585CTD.C ON # file_type = ascii END* CTDEDIT was used to remove 4 records at the surface and to clean salinity lightly. *******WARNING*********** SeaCat salinity is prone to error due to mismatch of conductivity and temperature response times especially when the descent rate is non-uniform. These errors are likely to be much larger than calibration errors. Salinity for this cruise has been edited extensively, but errors as high as 0.05units of salinity are likely in areas of high gradient and unsteady descent rate. ************************ !---1---- ---2---- ---3---- -4-- !Pressure Temperat Salinity Numb ! ure: :T0:C0 er_o ! Primary ~bin ! _rec ! ords !-------- -------- -------- ---- *END OF HEADER 2.4 11.2742 31.1801 1. 3.0 11.1630 31.1804 3. 4.0 10.6617 31.2375 4. 5.1 10.3285 31.3097 3. 6.1 10.1637 31.3670 3. 7.0 10.0461 31.3943 2. 7.9 9.8847 31.4342 3. 9.1 9.7010 31.4926 3. 10.0 9.5618 31.5533 2. 11.0 9.4168 31.6221 4. 12.1 9.2635 31.6626 3. 13.1 8.9832 31.7014 3. 14.1 8.8307 31.7369 2. 15.0 8.7667 31.7574 3. 16.1 8.7370 31.7755 3. 17.1 8.7051 31.7891 3. 18.1 8.7031 31.7890 3. 19.1 8.6688 31.8047 3. 20.1 8.6124 31.8099 3. 21.0 8.5728 31.8148 2. 21.9 8.5444 31.8156 3. 23.1 8.3890 31.8529 3. 24.0 8.3273 31.8867 2. 24.9 8.3110 31.9007 3. 26.0 8.3088 31.9161 3. 27.1 8.2991 31.9364 3. 28.0 8.2862 31.9478 2. 28.9 8.2761 31.9481 3. 30.0 8.2318 31.9524 3. 31.0 8.1938 31.9539 2. 31.9 8.1242 31.9635 3. 33.0 8.0203 31.9769 3. 34.0 7.8844 32.0044 3. 35.1 7.8150 32.0349 3. 36.0 7.7763 32.0582 2. 36.9 7.7352 32.0916 3. 38.0 7.7035 32.1303 3. 39.0 7.6861 32.1518 3. 40.1 7.6850 32.1630 3. 41.1 7.6834 32.1708 3. 42.1 7.7075 32.2091 3. 43.0 7.7615 32.2514 2. 43.9 7.7908 32.2646 3. 44.9 7.8098 32.2887 3. 45.9 7.8225 32.3293 3. 47.0 7.8330 32.3686 4. 48.1 7.8380 32.4007 5. 48.6 7.8396 32.4062 1.