*2014/11/28 15:03:47.25 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : UTC 2001/09/05 21:59:12.000 TIME INCREMENT : 0 0 0 0.5 0 ! (day hr min sec ms) NUMBER OF RECORDS : 56 DATA DESCRIPTION : CTD FILE TYPE : ASCII CRC : 5C6FB8F3 NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- --------------- -------------- -------------- 1 Pressure decibar 1.175333 55.71133 2 Temperature:Primary 'deg C (ITS90)' 4.5729 13.37163 3 Salinity:T0:C0 PSS-78 0.48025E-01 0.54825E-01 4 Number_of_bin_records n/a 3 6 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 9 F ' ' 4 4 ' ' ' ' 5 I I 0 $END $REMARKS This file converted from Sea-Bird file: P:\Cruise_Data_Processing\2001-46\Pro $END *ADMINISTRATION MISSION : 2001-46 AGENCY : IOS, Ocean Sciences Division, Sidney, B.C. COUNTRY : Canada PROJECT : Quesnel Lake SCIENTIST : Carmack E. *LOCATION GEOGRAPHIC AREA : Quesnel Lake STATION : QL1 EVENT NUMBER : 1 LATITUDE : 52 36.10000 N ! (deg min) LONGITUDE : 120 25.70000 W ! (deg min) WATER DEPTH : 64 *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-19 SERIAL NUMBER : 2688 $TABLE: SENSORS ! Name Abs Depth Serial No ! -------------------------------- -------------- ---------- Temperature ' ' 2688 Conductivity ' ' 2688 'Oxygen Current:Beckman/YSI' ' ' SBE23-0326 'Oxygen Temperature:Beckman/YSI' ' ' ' ' 'Pressure:Strain Gauge' ' ' 192787 $END $REMARKS SOFTWARE VERSION 1.10 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! -------- ------ ---------- -------- --------- --------- SBE_IOS 3.4.1 2014/11/28 14:42:18 726 726 CLEAN 5.2 2014/11/28 14:42:42 ? ? MERGEHDR 1.3 2014/11/28 14:44:46 726 726 CALIB 11.8.1 2014/11/28 14:45:20 726 726 ADTIMCH 4.4 2014/11/28 14:45:27 726 726 CLIP 1.3 2014/11/28 14:45:38 726 716 DELETE 6.3 2014/11/28 14:45:47 716 257 CTDEDIT 5.0.4 2014/11/28 14:47:25 257 254 BINAVE 4.2 2014/11/28 14:51:56 254 56 REMOVECH 8.2 2014/11/28 15:00:48 56 56 HDREDIT2 2.6 2014/11/28 15:03:47 ? ? $END $REMARKS -CLEAN functions: 2014/11/28 14:42:42 Set event to last 4 characters of file name -CALIB parameters: 2014/11/28 14:45:20 Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = P:\Cruise_Data_Processing\2001-46\Processing\doc\2001-46-recal1.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 2 Pressure:StrainGauge decibar 10 0.1400000E+01 0.1000000E+01 -The following ADTIMCH parameters were used. Add 7.00 hours to times in header file section Change time zone to UTC in header file section -The following CLIP parameters were used. Clip by Record Number Limits First Record,Last Record = 11, 10000 Time Not Available in File -The following DELETE parameters were used: Surface Record Removal: Last Press Min Maximum Surface Pressure (relative): 10.00 Surface Swell Pressure Tolerance: 1.00 Pressure NOT filtered. Swells deleted. Warning message if pressure difference of 2.00 Drop rates < 0.20m/s (calculated over 5 points) will be deleted. Drop rate applies in the range 10.00 to 45.89 dbars Sample interval (from FILE section of header) = 0.500 seconds. -CTDEDIT v5.0.4 2014/11/28 14:47:25 3 records were deleted in this editing session. No data values were changed. -The following BINAVE parameters were used: Bin channel = Pressure* Averaging interval = 1.00 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -REMOVECH 2014/11/28 15:00:48 The following CHANNEL(S) were removed: Scan_Number Conductivity:Primary [S/m] Descent_Rate [m/s] Oxygen [mL/l] Oxygen:saturation' [ml/l] Flag -HEADER EDITS: 2014/11/28 15:03:47 Applied edit header: P:\Cruise_Data_Processing\2001-46\Processing\doc\header.txt Channel 1: Pressure [decibar] Name: Pressure:StrainGauge ==> Pressure Format: F10.3 ==> F7.1 $END *COMMENTS SBE HEADER Sea-Bird SBE19 Data File: FileName = C:\2001-Qlake\QL01.hex Software Version 1.10 Temperature SN = 2688 Conductivity SN = 2688 System UpLoad Time = Sep 05 2001 21:38:46 QL01 ds SEACAT PROFILER V3.1b SN 2688 09/05/01 21:23:25.510 strain gauge pressure sensor: S/N = 192787, range = 1000 psia, tc = -70 Narrow Range Conductivity clk = 32767.578 iop = 174 vmain = 11.6 vlith = 5.2 mode = PROFILE ncasts = 4 sample rate = 1 scan every 0.5 seconds minimum raw conductivity frequency for pump turn on = 2500 hertz pump delay = 30 seconds samples = 10923 free = 105162 lwait = 0 msec SW1 = C8 battery cutoff = 7.3 volts number of voltages sampled = 2 logdata = NO S> dh cast 0 09/05 14:59:12 samples 0 to 725 sample rate = 1 scan every 0.5 seco nds stop = switch off S> # nquan = 9 # nvalues = 726 # units = specified # name 0 = scan: Scan Count # name 1 = prSM: Pressure, Strain Gauge [db] # name 2 = t090C: Temperature [ITS-90, deg C] # name 3 = c0S/m: Conductivity [S/m] # name 4 = dz/dtM: Descent Rate [m/s] # name 5 = oxML/L: Oxygen, Beckman/YSI [ml/l] # name 6 = sal00: Salinity, Practical [PSU] # name 7 = oxsolML/L: Oxygen Saturation, Garcia & Gordon [ml/l] # name 8 = flag: flag # span 0 = 1, 726 # span 1 = -1.591, 54.490 # span 2 = 4.5729, 18.4126 # span 3 = -0.000177, 0.012881 # span 4 = -0.892, 0.714 # span 5 = -7.13060, 53.19675 # span 6 = 0.0000, 0.0798 # span 7 = 6.56883, 9.03266 # span 8 = 0.0000e+00, 0.0000e+00 # interval = seconds: 0.5 # start_time = Sep 05 2001 14:59:12 [Instrument's time stamp, header] # bad_flag = -9.990e-29 # # # # # 2688 # 31 Mar 2001 # 1 # 0.00000000e+000 # 0.00000000e+000 # 0.00000000e+000 # 0.00000000e+000 # 0.000 # 4.24252636e-003 # 6.28243854e-004 # 1.85651100e-005 # 1.56030732e-006 # 1000.000 # 1.00000000 # 0.0000 # # # # # # 2688 # 31 Mar 2001 # 1 # # 0.0000 # 2000.0000 # 0 # # 0.00000000e+000 # 0.00000000e+000 # 0.00000000e+000 # 0.00000000e+000 # 0.0 # 0.00000000e+000 # # # -4.22663063e+000 # 5.05571664e-001 # 6.64894512e-004 # -1.98773170e-006 # -9.57000000e-008 # 3.2500e-006 # # 0.00000000e+000 # # 1.00000000 # 0.00000 # # # # # # SBE23-0326 # 10 Apr 2001 # 1.0530e-005 # -1.0530e-009 # 0.0783 # -0.0156 # -0.0330 # 1.50e-004 # 2.0 # 0.85 # # # # # # # # 6.4852 # -2.1700 # # # # # # 192787 # 04 Apr 2001 # 5.013960e+002 # -1.301839e-001 # 1.259092e-007 # 0.00000 # # # # datcnv_date = Nov 28 2014 14:38:21, 7.22.5 [datcnv_vars = 6] # datcnv_in = P:\Cruise_Data_Processing\2001-46\RAW\CTD\2001-46-0001.hex P:\Crui se_Data_Processing\2001-46\Processing\doc\2001-46-ctd.CON # datcnv_skipover = 0 # datcnv_ox_tau_correction = yes # filter_date = Nov 28 2014 14:38:52, 7.22.5 # filter_in = P:\Cruise_Data_Processing\2001-46\Processing\convert\2001-46-0001. cnv # filter_low_pass_tc_A = 0.500 # filter_low_pass_tc_B = 2.000 # filter_low_pass_A_vars = c0S/m # filter_low_pass_B_vars = # alignctd_date = Nov 28 2014 14:39:00, 7.22.5 # alignctd_in = P:\Cruise_Data_Processing\2001-46\Processing\filter\2001-46-0001 .cnv # alignctd_adv = t090C 0.500 # Derive_date = Nov 28 2014 14:39:08, 7.22.5 [derive_vars = 2] # Derive_in = P:\Cruise_Data_Processing\2001-46\Processing\align\2001-46-0001.cn v P:\Cruise_Data_Processing\2001-46\Processing\doc\2688-01ox.CON # file_type = ascii END* Remarks from CTDEDIT: CTDEDIT was used to remove 3 records from the top of the cast. **************************************************************************** SBE23 Dissolved Oxygen data were removed because there was no calibration sampling and no post-cruise factory calibration and surface saturation values were ~60% t0 ~70%. ************************************************************************* *CALIBRATION $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------------------- --------- ---- ------ ------------ Pressure:StrainGauge decibar 10 -99 () (1.4 1) $END !--1--- ---2---- ---3---- -4-- !Pressu Temperat Salinity Numb !re ure: :T0:C0 er_o ! Primary ~bin ! _rec ! ords !------ -------- -------- ---- *END OF HEADER 1.2 13.3716 0.0513 3 2.1 13.3360 0.0513 5 3.1 13.3169 0.0513 4 4.0 13.3129 0.0513 5 5.0 13.3063 0.0513 4 5.9 13.2881 0.0513 5 7.0 13.2742 0.0513 5 7.9 13.2456 0.0513 4 8.9 13.2287 0.0513 5 10.0 13.1990 0.0513 5 11.0 13.1831 0.0513 4 12.0 13.1547 0.0513 5 13.0 13.0976 0.0513 4 13.9 12.9708 0.0514 4 14.9 12.9110 0.0514 5 16.0 12.8763 0.0514 5 17.0 12.7598 0.0518 4 18.0 12.6841 0.0522 5 19.0 12.6610 0.0522 4 19.9 12.6186 0.0524 5 21.0 12.5816 0.0524 5 22.1 12.4961 0.0525 4 23.0 12.3617 0.0532 5 24.0 9.4144 0.0548 4 25.0 8.1928 0.0532 5 26.1 7.3369 0.0520 5 27.1 7.0973 0.0513 4 28.0 6.7733 0.0509 4 29.0 6.2359 0.0503 5 30.0 5.8998 0.0497 5 31.1 5.7828 0.0493 4 32.0 5.6921 0.0492 5 32.9 5.5640 0.0492 4 33.9 5.4751 0.0490 5 35.1 5.4051 0.0491 5 36.1 5.2064 0.0489 4 37.0 5.0543 0.0487 4 38.0 4.9958 0.0486 5 38.9 4.9195 0.0484 4 40.0 4.8674 0.0484 5 41.1 4.8398 0.0483 5 42.0 4.8355 0.0482 4 42.9 4.8306 0.0482 4 44.0 4.8214 0.0482 5 45.1 4.8230 0.0481 5 46.1 4.8202 0.0481 5 47.1 4.8087 0.0481 4 48.1 4.7866 0.0481 5 49.0 4.7550 0.0481 5 50.1 4.7344 0.0480 5 51.0 4.6891 0.0481 4 51.9 4.6455 0.0481 4 52.9 4.6189 0.0481 6 54.1 4.5827 0.0481 5 55.0 4.5767 0.0480 4 55.7 4.5729 0.0481 3