*2013/12/16 15:24:01.89 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : UTC 2001/07/08 22:43:13.000 TIME INCREMENT : 0 0 0 0.416667E-01 0 ! (day hr min sec ms) NUMBER OF RECORDS : 7 DATA DESCRIPTION : Bottle:Rosette:Up:Stop + CTD:Up FILE TYPE : ASCII NUMBER OF CHANNELS : 12 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- --------------------------- --------------- -------------- -------------- 1 Sample_Number n/a 106 112 2 Pressure decibar 1.4 79 3 Temperature:Primary 'deg C (ITS90)' 8.0947 16.1491 4 Transmissivity %/metre 10.5 49.6 5 Fluorescence:URU:Seapoint mg/m^3 0.45E-01 2.68 6 Oxygen:Dissolved:SBE umol/kg 84.8 373.6 7 PAR uE/m^2/sec 0.5 740.9 8 Salinity:T0:C0 PSS-78 27.2902 32.8966 9 Bottle_Number n/a 1 7 10 Oxygen:Dissolved mL/L 1.93 8.2 11 Oxygen:Dissolved:SBE mL/L 1.95 8.53 12 Oxygen:Dissolved umol/kg 84 359 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 5 I I 0 2 -99 ' ' 7 F ' ' 1 3 -99 ' ' 9 F ' ' 4 4 -99 ' ' 6 F ' ' 1 5 -99 ' ' 8 F ' ' 3 6 -99 ' ' 6 F ' ' 1 7 -99 ' ' 7 F ' ' 1 8 -99 ' ' 9 F ' ' 4 9 -99 ' ' 3 I I 0 10 -99 ' ' 8 F ' ' 3 11 -99 ' ' 7 F ' ' 2 12 -99 ' ' 6 F ' ' 1 $END $REMARKS This file converted from Sea-Bird file: Q:\CTD\2001-20\hydro\21200060.ros Comments from secondary file: D:\DATA\2001\2001-20\21200060.OXY --------------------------------------------------------------- Raw data in file oxydata\2120\21200060.o2 VIO3 = 10.02 ! Volume of iodate standard (cm**) NIO3 = .01013364 ! Normality of iodate standard VREG = 2.0 ! Volume of sample displaced by reagents (cm**3) DOREG = 0.0017 ! Absolute amount of O2 added with reagents (ml) $END *ADMINISTRATION MISSION : 2001-20 AGENCY : IOS, Ocean Science and Productivity, Sidney, B.C. COUNTRY : Canada PROJECT : Endeavour Ridge, Laperouse, Effingham Inlet SCIENTIST : Thomson R.E. PLATFORM : John P. Tully *LOCATION GEOGRAPHIC AREA : North-East Pacific STATION : EF08 EVENT NUMBER : 60 LATITUDE : 49 0.67000 N ! (deg min) LONGITUDE : 125 10.25000 W ! (deg min) *INSTRUMENT TYPE : Bottle MODEL : Niskin 10 Litre SERIAL NUMBER : 0550 $TABLE: SENSORS ! Name Abs Depth Serial No ! ----------------- -------------- ---------- temperature ' ' primary conductivity ' ' primary pressure ' ' 75636 temperature ' ' secondary conductivity ' ' secondary Fluorometer ' ' Seapoint transmissometer ' ' primary irradiance ' ' 4615 Oxygen ' ' SBE $END $REMARKS SOFTWARE VERSION SEASAVE WIN32 V%S Comments from secondary file: D:\DATA\2001\2001-20\21200060.OXY --------------------------------------------------------------- Dissolved oxygen concentration determined using an automated titration system consisting of a Brinkman dosimat (model 665) and a PC 900 Colorimeter. $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- SBE_IOS 1.8 2001/08/27 13:20:53 847 847 BINAVE 4.0.1 2001/08/27 13:22:21 847 7 CALIB 10.0 2001/09/10 16:08:13 7 7 REORDER 1.1 2001/09/10 16:22:12 ? ? ADDSAMP 3.0 2002/01/04 14:53:27 7 7 MERGE 2.7 2002/01/04 15:05:06 7 7 CHGUNITS 1.2 2002/01/04 15:17:02 7 7 HDREDIT2 1.3 2002/03/18 17:02:30 ? ? CHGUNITS 1.3 2002/03/18 17:03:30 7 7 CALIB 10.2 2002/03/19 09:46:25 7 7 HDREDIT2 1.9 2004/04/01 16:54:08 ? ? SORT 3.4.1 2004/04/01 16:56:33 7 7 CLEAN 4.5 2004/04/01 16:56:41 7 7 CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:24:01 7 7 $END $REMARKS -The following BINAVE parameters were used: Bin channel = Bottle_Number Averaging interval = 1.0 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CALIB parameters were used: Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = Q:\CTD\2001-20\2120rcal.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 8 Chl_fluorescence:Seapoint ug/l 10 -0.3000000E-01 0.1000000E+01 11 Salinity:T0:C0 PSS-78 10 -0.5200000E-02 0.1000000E+01 12 Salinity:T1:C1 PSS-78 10 -0.4600000E-02 0.1000000E+01 -The following ADDSAMP parameters were used: Sample Number Lookup File: D:\DATA\2001\2001-20\numbers.csv Bottle Channel Name: Bottle_Number -The following MERGE parameters were used: Merge Channel: Sample_Number Merge Scheme Used: Add Secondary to Primary Overlap Scheme Used: Keep Primary Primary Channels to Include: Pressure, Temperature:Primary, Transmissivity, Chl_fluorescence:Seapoint, Oxygen:SBE:mass, Irradiance_PAR, Salinity:T0:C0, Bottle_Number Secondary Channels to Include: Dissolved_Oxygen:volume Primary file : D:\DATA\2001\2001-20\21200060.SAM Secondary file: D:\DATA\2001\2001-20\21200060.OXY Comments from secondary file: D:\DATA\2001\2001-20\21200060.OXY --------------------------------------------------------------- C.H. Culbertson's paper on Dissolved Oxygen in the 'Woce Hydrographic Program Operations and Methods - July 1991' CHANGE units: - Units changed from umol/kg to ml/l CHANGE units: - Units changed from ml/l to umol/kg -The following CALIB parameters were used: Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = M:\Data\oxy\2120\2120oxy.CCF Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 6 Oxygen:SBE:mass umol/kg 10 -0.1480000E+01 0.1330000E+01 11 Oxygen:SBE:volume ml/l 10 -0.3330000E-01 0.1330000E+01 -The following SORT parameters were used. Sorted by channel: Pressure Pressure channel sorted according to values in sort channel CLEAN functions: - Reset #RECS, MIN & MAX values in header. - Change Pad Value to -99 in All Channels. - Delete Empty Channels: 0 deleted. - Remove Sea-Bird comments from the header. $END *COMMENTS The SBE Oxygen data should be considered to be within +/- 5%. Collection method: ------------------ A rosette, holding 24 ten-litre water samplers, with a CTD was used. Analysis methods: ----------------- Salinity samples are collected in glass bottles and analyzed on Guildline model 8410 Portasal Salinometers which are standardized with IAPSO standard seawater. Oxygen samples are analyzed on an automated Winkler titration system following the procedures of Carpenter (1965). A Brinkmann model 665 Dosimat and model PC910 Colorimeter is controlled by Visual-Basic program to titrate the oxygen samples. References: 1. Carpenter, J.H. 1965. The Chesapeake Bay Institute Technique for the Winkler Dissolved Oxygen Method. Limmnol. & Oceanogr., 10: 141-143. *CALIBRATION $TABLE: CORRECTED CHANNELS !Name Units Fmla Pad Coefficients !--------------------------- --------- ---- ------ ------------ Chl_fluorescence:Seapoint ug/l 10 -9.9 () (-0.3E-01 1) Salinity:T0:C0 PSS-78 10 -9.9 () (-0.52E-02 1) Salinity:T1:C1 PSS-78 10 -9.9 () (-0.46E-02 1) Oxygen:SBE:mass umol/kg 10 -9.9 () (-1.48 1.33) Oxygen:SBE:volume ml/l 10 -9.9 () (-0.333E-01 1.33) $END !-1-- --2--- ---3---- --4-- ---5--- --6-- --7--- ---8---- 9- ---10-- --11-- --12- !Samp Pressu Temperat Trans Fluores Oxyge PAR Salinity Bo Oxygen: Oxygen Oxyge !le_ re ure: missi cence: n: :T0:C0 tt Dissolv : n: !Numb Primary vity URU: Disso ~u ed Dissol Disso !er Seapoin lved: mb ved: lved ! t SBE er SBE !---- ------ -------- ----- ------- ----- ------ -------- -- ------- ------ ----- *END OF HEADER 112 1.4 16.1491 10.5 1.369 373.6 740.9 27.2902 7 8.200 8.53 359.0 111 10.4 8.9089 38.1 2.680 134.0 20.6 32.2574 6 2.430 3.08 105.8 110 20.4 8.5704 49.6 0.239 92.4 5.0 32.4387 5 2.120 2.12 92.3 109 30.3 8.4312 48.8 0.099 96.3 1.9 32.5370 4 2.210 2.21 96.2 108 50.2 8.2453 44.4 0.045 84.8 0.6 32.6898 3 1.930 1.95 84.0 107 75.2 8.1031 33.2 0.065 86.0 0.5 32.8847 2 1.970 1.98 85.8 106 79.0 8.0947 33.5 0.062 87.1 0.5 32.8966 1 1.960 2.00 85.3