*2005/05/24 15:17:14.96 *IOS HEADER VERSION 1.5 2005/04/01 2005/04/22 *COMMENTS Beam10Down Alt S start position 50 57.12 N 128 4.30 W 03:00:28 07-09-1980 Alt S stop position 50 57.11 N 128 4.30 W 03:01:27 07-09-1980 CTDEDIT was used to remove surface records to 1.7db and a few records from the bottom of the cast. There was no salinity calibration sampling. The last calibration on file was from 1998. This is probably the right one for this data set, but it is not certain. Calibration sampling in 1998 showed that most samples were within +/- 0.005psu, so a reasonable estimate for this cruise is +/-0.01psu. *FILE START TIME : UTC 2000/07/09 03:00:28.680 END TIME : UTC 2000/07/09 03:01:27.890 NUMBER OF RECORDS : 25 DATA DESCRIPTION : CTD FILE TYPE : ASCII DATA TYPE : real*4 NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum ! -- ----------------------- ---------------- -------------- -------------- 1 Pressure decibar 2.154375 25.65267 2 Temperature 'deg C (IPTS68)' 8.729672 10.79502 3 Salinity PSS-78 31.14671 32.22897 4 Number_of_bin_records n/a 15 63 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places ! -- ---- ----- ----- ------ ------ -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 8 F REAL*4 3 4 ' ' ' ' 5 I I 0 $END $REMARKS File name : Prod0010.ACQ $END *ADMINISTRATION MISSION : 2000-38 AGENCY : PBS PROJECT : BeamJuly SCIENTIST : Beamish R. PLATFORM : W.E. Ricker *LOCATION GEOGRAPHIC AREA : SoG/JdeF STATION : NONE EVENT NUMBER : 10 LATITUDE : 50 57.12000 N ! (deg min) LONGITUDE : 128 4.30000 W ! (deg min) LATITUDE 2 : 50 57.11000 N ! (deg min) LONGITUDE 2 : 128 4.30000 W ! (deg min) WATER DEPTH : 200 $REMARKS Station Latitude : 0 0.00 N Longitude : 0 0.00 W Depth : 9999 $END *INSTRUMENT TYPE : Guildline 8715 CTD MODEL : 87107 SERIAL NUMBER : 53501 $REMARKS Acquisition program : CTD.EXE version 1.47 CTD data type : 2 ! 8755 system binary frame Control String : KP2000TC $END *RAW START TIME : UTC 1980/07/09 03:00:28.680 END TIME : UTC 1980/07/09 03:01:27.890 TIME INCREMENT : 0 0 0 0 40 ! (day hr min sec ms) NUMBER OF RECORDS : 1298 $TABLE: CHANNELS ! Name Raw Units ! -------------------- ---------- Pressure Percent_FS Temperature 'DEG C (ITS68)' Conductivity_Ratio n/a $END *CALIBRATION $TABLE: RAW CHANNELS ! Name Units Fmla Pad Coefficients ! -------------------- --------------- ---- ------ ------------ Pressure dBars 10 -99 (0 2000) Temperature 'DEG C (ITS68)' 10 -99 (-0.27318E-02 0.999875) Conductivity_Ratio n/a 63 -99 (0.503156E-04 0.999729) $END $TABLE: CALCULATED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 130 -99 (Pressure Temperature Conductivity_Ratio) () $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! -------- ------ ---------- -------- --------- --------- ACQCONV 2.02 2005/05/23 15:00:59 1298 1298 CALIB 11.4 2005/05/23 15:04:56 1298 1298 CLEAN 4.8 2005/05/23 15:58:12 1298 1298 DESPIKE 2.3 2005/05/23 16:29:56 1298 1298 DELETE 6.3 2005/05/23 16:37:13 1298 863 FILTERS 4.3 2005/05/23 16:37:44 863 863 CTDEDIT 4.60 2005/05/24 09:18:12 863 735 BINAVE 4.1 2005/05/24 13:47:38 735 25 REMOVECH 7.0 2005/05/24 15:15:09 25 25 HDREDIT2 2.5 2005/05/24 15:17:14 ? ? $END $REMARKS -The following CALIB parameters were used: Calibration type = Raw Mode: UNION - calibration specs from Header and Cal File. Salinity is computed Calibration file = Q:\Cruise_Data\2000-38\DOC\2000-38CAL.CCF Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 1 Pressure dBars 10 0.0000000E+00 0.2000000E+04 2 Temperature DEG C (IT 10 -0.2731800E-02 0.9998750E+00 3 Conductivity_Ratio n/a 63 0.5031560E-04 0.9997290E+00 Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 4 Salinity PSS-78 130 Pressure Temperature Conductivity_Ratio -CLEAN functions: 2005/05/23 15:58:11 20 Interpolation by Record Number, in All Channels -The following DESPIKE parameters were used: DESPIKE TABLE CHANNEL FIT OVER- MIN MAX MIN MAX SPIKE WIDTH LAP VALUE VALUE STDDEV STDDEV TOL. -------------------- ----- ----- ------- ------- ------- ------- ----- Pressure 55 2 -2.00 4000.00 0.10000 999.000 3.00 Temperature 55 2 -2.00 25.00 0.00500 999.000 3.00 Conductivity_Ratio 55 2 0.00 5.00 0.00010 999.000 3.00 -The following DELETE parameters were used: Surface Record Removal: Low Sal & Last Press Min Maximum Surface Pressure (relative): 10.00 Minimum Surface Salinity: 5.000 Surface Swell Pressure Tolerance: 1.00 Pressure filtered over width: 11 Swells deleted. Warning message if pressure difference of 2.00 Drop rates < 0.30m/s (calculated over 11 points) will be deleted. Drop rate applies in the range 10.00 to 15.95 dbars Sample interval (from user input) = 0.040 seconds. -The following FILTER parameters were used. Median filter was used. Filter width = 15 The following channel(s) were filtered. Salinity -CTDEDIT 2005/05/24 09:18:12 128 records were deleted in this editing session. No data values were changed. -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 1.00 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -REMOVECH 2005/05/24 15:15:09 The following CHANNEL(S) were removed: Conductivity_Ratio -HEADER EDITS: 2005/05/24 15:17:14 Applied edit header: Q:\Cruise_Data\2000-38\DOC\2000GLD.hdr Channel 1: Pressure [decibar] Units: dBars ==> decibar Format: F10.2 ==> F7.1 Channel 2: Temperature [deg C (IPTS68)] Units: DEG C (ITS68) ==> deg C (IPTS68) Format: F12.4 ==> F9.4 Channel 3: Salinity [PSS-78] Format: F9.4 ==> F8.3 $END !--1--- ---2---- ---3--- -4-- !Pressu Temperat Salinit Numb !re ure y er_o ! ~bin ! _rec ! ords !------ -------- ------- ---- *END OF HEADER 2.2 10.7950 31.147 32 3.0 9.8371 31.544 35 4.0 9.6137 31.643 32 5.0 9.5683 31.656 30 6.0 9.5050 31.680 32 7.0 9.4112 31.712 25 8.0 9.3251 31.750 24 9.0 9.0532 31.796 28 10.0 9.0588 31.810 31 10.9 9.0448 31.827 28 12.0 9.0001 31.840 27 13.0 8.9547 31.854 27 14.0 8.8867 31.890 23 15.0 8.8058 31.934 23 16.0 8.7670 31.963 23 17.0 8.7342 31.996 24 18.0 8.7297 32.045 22 19.0 8.7650 32.072 23 20.0 8.7987 32.095 23 21.0 8.7979 32.101 27 22.0 8.8031 32.129 32 23.0 8.8044 32.135 34 23.9 8.8087 32.145 63 25.0 8.8366 32.189 52 25.6 8.8651 32.229 15