*2005/05/23 13:57:14.77 *IOS HEADER VERSION 1.5 2005/04/01 2005/04/22 *COMMENTS BeamProd3 Alt S start position 49 16.89 N 123 46.47 W 15:58:35 04-15-1980 Alt S stop position 49 17.05 N 123 45.98 W 17:01:57 04-15-1980 There was no salinity calibration sampling. The last calibration on file was from 1998. This is probably the right one for this data set, but it is not certain. Calibration sampling in 1998 showed that most samples were within +/- 0.005psu, so a reasonable estimate for this cruise is +/-0.01psu. *FILE START TIME : UTC 2000/04/15 15:58:34.690 END TIME : UTC 2000/04/15 17:01:57.390 NUMBER OF RECORDS : 15 DATA DESCRIPTION : CTD FILE TYPE : ASCII DATA TYPE : real*4 NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum ! -- ----------------------- ---------------- -------------- -------------- 1 Pressure decibar 16.17533 29.55 2 Temperature 'deg C (IPTS68)' 8.15625 8.220154 3 Salinity PSS-78 29.11997 29.3505 4 Number_of_bin_records n/a 1 25 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places ! -- ---- ----- ----- ------ ------ -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 8 F REAL*4 3 4 ' ' ' ' 5 I I 0 $END $REMARKS File name : Prod0006.ACQ $END *ADMINISTRATION MISSION : 2000-37 AGENCY : PBS PROJECT : BeamProd SCIENTIST : Beamish R. PLATFORM : W.E. Ricker *LOCATION GEOGRAPHIC AREA : SoG/JdeF/WCVI STATION : NONE EVENT NUMBER : 6 LATITUDE : 49 16.89000 N ! (deg min) LONGITUDE : 123 46.47000 W ! (deg min) LATITUDE 2 : 49 17.05000 N ! (deg min) LONGITUDE 2 : 123 45.98000 W ! (deg min) WATER DEPTH : 200 $REMARKS Station Latitude : 0 0.00 N Longitude : 0 0.00 W Depth : 9999 $END *INSTRUMENT TYPE : Guildline 8715 CTD MODEL : 87107 SERIAL NUMBER : 53501 $REMARKS Acquisition program : CTD.EXE version 1.47 CTD data type : 2 ! 8755 system binary frame Control String : KP2000TC $END *RAW START TIME : UTC 1980/04/15 15:58:34.690 END TIME : UTC 1980/04/15 17:01:57.390 TIME INCREMENT : 0 0 0 0 40 ! (day hr min sec ms) NUMBER OF RECORDS : 321 $TABLE: CHANNELS ! Name Raw Units ! -------------------- ---------- Pressure Percent_FS Temperature 'DEG C (ITS68)' Conductivity_Ratio n/a $END *CALIBRATION $TABLE: RAW CHANNELS ! Name Units Fmla Pad Coefficients ! -------------------- --------------- ---- ------ ------------ Pressure dBars 10 -99 (0 2000) Temperature 'DEG C (ITS68)' 10 -99 (-0.27318E-02 0.999875) Conductivity_Ratio n/a 63 -99 (0.503156E-04 0.999729) $END $TABLE: CALCULATED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 130 -99 (Pressure Temperature Conductivity_Ratio) () $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! -------- ------ ---------- -------- --------- --------- ACQCONV 2.02 2005/05/22 13:19:06 321 321 CALIB 11.4 2005/05/22 13:19:37 321 321 CLEAN 4.8 2005/05/22 13:51:55 321 321 DESPIKE 2.3 2005/05/22 13:56:10 321 321 TIMECOMP 4.2 2005/05/22 13:56:49 9951 321 DELETE 6.3 2005/05/22 13:58:26 321 321 BINAVE 4.1 2005/05/22 16:03:59 321 15 REMOVECH 7.0 2005/05/22 16:09:41 15 15 HDREDIT2 2.5 2005/05/23 13:57:14 ? ? $END $REMARKS -The following CALIB parameters were used: Calibration type = Raw Mode: UNION - calibration specs from Header and Cal File. Salinity is computed Calibration file = Q:\Cruise_Data\2000-37\DOC\2000-37CAL.CCF Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 1 Pressure dBars 10 0.0000000E+00 0.2000000E+04 2 Temperature DEG C (IT 10 -0.2731800E-02 0.9998750E+00 3 Conductivity_Ratio n/a 63 0.5031560E-04 0.9997290E+00 Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 4 Salinity PSS-78 130 Pressure Temperature Conductivity_Ratio -CLEAN functions: 2005/05/22 13:51:54 20 Interpolation by Record Number, in All Channels -The following DESPIKE parameters were used: DESPIKE TABLE CHANNEL FIT OVER- MIN MAX MIN MAX SPIKE WIDTH LAP VALUE VALUE STDDEV STDDEV TOL. -------------------- ----- ----- ------- ------- ------- ------- ----- Pressure 55 2 -2.00 4000.00 0.10000 999.000 3.00 Temperature 55 2 -2.00 25.00 0.00500 999.000 3.00 Conductivity_Ratio 55 2 0.00 5.00 0.00010 999.000 3.00 -The following TIMECOMP parameters were used: Temp. probe Dist (m): 0.0700 Sample period (sec): 0.0400 -The following DELETE parameters were used: Surface Record Removal: Low Sal & Last Press Min Maximum Surface Pressure (relative): 10.00 Minimum Surface Salinity: 5.000 Surface Swell Pressure Tolerance: 1.00 Pressure filtered over width: 11 Swells deleted. Warning message if pressure difference of 2.00 Drop rates < 0.30m/s (calculated over 11 points) will be deleted. Drop rate applies in the range 10.00 to 19.55 dbars Sample interval (from user input) = 0.040 seconds. -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 1.00 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -REMOVECH 2005/05/22 16:09:41 The following CHANNEL(S) were removed: Conductivity_Ratio -HEADER EDITS: 2005/05/23 13:57:14 Applied edit header: Q:\Cruise_Data\2000-36\DOC\2000GLD.hdr Channel 1: Pressure [decibar] Units: dBars ==> decibar Format: F10.2 ==> F7.1 Channel 2: Temperature [deg C (IPTS68)] Units: DEG C (ITS68) ==> deg C (IPTS68) Format: F12.4 ==> F9.4 Channel 3: Salinity [PSS-78] Format: F9.4 ==> F8.3 $END !--1--- ---2---- ---3--- -4-- !Pressu Temperat Salinit Numb !re ure y er_o ! ~bin ! _rec ! ords !------ -------- ------- ---- *END OF HEADER 16.2 8.2202 29.120 15 17.0 8.2161 29.124 24 18.0 8.2018 29.127 24 19.0 8.1953 29.133 24 20.0 8.1806 29.156 23 21.0 8.1756 29.173 23 22.0 8.1722 29.183 24 23.0 8.1706 29.191 23 24.0 8.1701 29.206 25 25.0 8.1588 29.257 22 26.0 8.1562 29.282 24 27.0 8.1608 29.301 23 28.0 8.1624 29.316 22 29.0 8.1659 29.344 24 29.5 8.1672 29.351 1