*2005/05/23 13:57:14.57 *IOS HEADER VERSION 1.5 2005/04/01 2005/04/22 *COMMENTS BeamProd1 Alt S start position 49 16.81 N 123 46.09 W 14:28:45 04-15-1980 Alt S stop position 49 16.80 N 123 46.08 W 14:29:48 04-15-1980 CTDEDIT was used to remove a few records from the bottom of the cast. There was no salinity calibration sampling. The last calibration on file was from 1998. This is probably the right one for this data set, but it is not certain. Calibration sampling in 1998 showed that most samples were within +/- 0.005psu, so a reasonable estimate for this cruise is +/-0.01psu. *FILE START TIME : UTC 2000/04/15 14:28:44.680 END TIME : UTC 2000/04/15 14:29:48.890 NUMBER OF RECORDS : 14 DATA DESCRIPTION : CTD FILE TYPE : ASCII DATA TYPE : real*4 NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum ! -- ----------------------- ---------------- -------------- -------------- 1 Pressure decibar 0.3036842 13.09222 2 Temperature 'deg C (IPTS68)' 8.696397 10.4151 3 Salinity PSS-78 10.91835 13.94506 4 Number_of_bin_records n/a 19 46 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places ! -- ---- ----- ----- ------ ------ -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 8 F REAL*4 3 4 ' ' ' ' 5 I I 0 $END $REMARKS File name : Prod0002.ACQ $END *ADMINISTRATION MISSION : 2000-37 AGENCY : PBS PROJECT : BeamProd SCIENTIST : Beamish R. PLATFORM : W.E. Ricker *LOCATION GEOGRAPHIC AREA : SoG/JdeF/WCVI STATION : NONE EVENT NUMBER : 2 LATITUDE : 49 16.81000 N ! (deg min) LONGITUDE : 123 46.09000 W ! (deg min) LATITUDE 2 : 49 16.80000 N ! (deg min) LONGITUDE 2 : 123 46.08000 W ! (deg min) WATER DEPTH : 200 $REMARKS Station Latitude : 0 0.00 N Longitude : 0 0.00 W Depth : 9999 $END *INSTRUMENT TYPE : Guildline 8715 CTD MODEL : 87107 SERIAL NUMBER : 53501 $REMARKS Acquisition program : CTD.EXE version 1.47 CTD data type : 2 ! 8755 system binary frame Control String : KP2000TC $END *RAW START TIME : UTC 1980/04/15 14:28:44.680 END TIME : UTC 1980/04/15 14:29:48.890 TIME INCREMENT : 0 0 0 0 40 ! (day hr min sec ms) NUMBER OF RECORDS : 1347 $TABLE: CHANNELS ! Name Raw Units ! -------------------- ---------- Pressure Percent_FS Temperature 'DEG C (ITS68)' Conductivity_Ratio n/a $END *CALIBRATION $TABLE: RAW CHANNELS ! Name Units Fmla Pad Coefficients ! -------------------- --------------- ---- ------ ------------ Pressure dBars 10 -99 (0 2000) Temperature 'DEG C (ITS68)' 10 -99 (-0.27318E-02 0.999875) Conductivity_Ratio n/a 63 -99 (0.503156E-04 0.999729) $END $TABLE: CALCULATED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 130 -99 (Pressure Temperature Conductivity_Ratio) () $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! -------- ------ ---------- -------- --------- --------- ACQCONV 2.02 2005/05/22 13:19:03 1347 1347 CALIB 11.4 2005/05/22 13:19:34 1347 1347 CLEAN 4.8 2005/05/22 13:51:54 1347 1347 DESPIKE 2.3 2005/05/22 13:56:09 1347 1347 TIMECOMP 4.2 2005/05/22 13:56:48 1347 1347 DELETE 6.3 2005/05/22 13:58:24 1347 484 FILTERS 4.3 2005/05/22 14:15:52 484 484 CTDEDIT 4.60 2005/05/22 14:19:10 484 476 BINAVE 4.1 2005/05/22 16:03:58 476 14 REMOVECH 7.0 2005/05/22 16:09:40 14 14 HDREDIT2 2.5 2005/05/23 13:57:14 ? ? $END $REMARKS -The following CALIB parameters were used: Calibration type = Raw Mode: UNION - calibration specs from Header and Cal File. Salinity is computed Calibration file = Q:\Cruise_Data\2000-37\DOC\2000-37CAL.CCF Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 1 Pressure dBars 10 0.0000000E+00 0.2000000E+04 2 Temperature DEG C (IT 10 -0.2731800E-02 0.9998750E+00 3 Conductivity_Ratio n/a 63 0.5031560E-04 0.9997290E+00 Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 4 Salinity PSS-78 130 Pressure Temperature Conductivity_Ratio -CLEAN functions: 2005/05/22 13:51:54 Interpolation by Record Number, in All Channels -The following DESPIKE parameters were used: DESPIKE TABLE CHANNEL FIT OVER- MIN MAX MIN MAX SPIKE WIDTH LAP VALUE VALUE STDDEV STDDEV TOL. -------------------- ----- ----- ------- ------- ------- ------- ----- Pressure 55 2 -2.00 4000.00 0.10000 999.000 3.00 Temperature 55 2 -2.00 25.00 0.00500 999.000 3.00 Conductivity_Ratio 55 2 0.00 5.00 0.00010 999.000 3.00 -The following TIMECOMP parameters were used: Temp. probe Dist (m): 0.0700 Sample period (sec): 0.0400 -The following DELETE parameters were used: Surface Record Removal: Low Sal & Last Press Min Maximum Surface Pressure (relative): 10.00 Minimum Surface Salinity: 5.000 Surface Swell Pressure Tolerance: 1.00 Pressure filtered over width: 11 Swells deleted. Warning message if pressure difference of 2.00 Drop rates < 0.30m/s (calculated over 11 points) will be deleted. Drop rate applies in the range 10.00 to 3.65 dbars Sample interval (from user input) = 0.040 seconds. -The following FILTER parameters were used. Median filter was used. Filter width = 15 The following channel(s) were filtered. Salinity -CTDEDIT 2005/05/22 14:19:10 8 records were deleted in this editing session. No data values were changed. -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 1.00 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -REMOVECH 2005/05/22 16:09:40 The following CHANNEL(S) were removed: Conductivity_Ratio -HEADER EDITS: 2005/05/23 13:57:14 Applied edit header: Q:\Cruise_Data\2000-36\DOC\2000GLD.hdr Channel 1: Pressure [decibar] Units: dBars ==> decibar Format: F10.2 ==> F7.1 Channel 2: Temperature [deg C (IPTS68)] Units: DEG C (ITS68) ==> deg C (IPTS68) Format: F12.4 ==> F9.4 Channel 3: Salinity [PSS-78] Format: F9.4 ==> F8.3 $END !--1--- ---2---- ---3--- -4-- !Pressu Temperat Salinit Numb !re ure y er_o ! ~bin ! _rec ! ords !------ -------- ------- ---- *END OF HEADER 0.3 10.3455 10.918 19 1.0 10.3555 11.044 46 2.0 10.4039 11.648 43 3.0 10.4151 11.917 42 4.0 10.1774 12.111 43 5.0 9.8597 12.315 42 6.0 9.5774 12.664 34 7.0 9.3505 12.894 30 8.0 9.2304 13.046 28 9.0 9.0799 13.345 30 10.0 8.9580 13.550 28 11.0 8.8227 13.579 27 12.0 8.7323 13.701 28 13.1 8.6964 13.945 36