*2005/05/21 14:34:30.55 *IOS HEADER VERSION 1.5 2005/04/01 2005/04/22 *COMMENTS sombrio point down Alt S start position 48 28.21 N 124 20.95 W 14:09:04 03-30-1990 Alt S stop position 48 28.22 N 124 20.96 W 14:12:15 03-30-1990 CTDEDIT was used to remove surface records to 0.7db and around 5db. There was no salinity calibration sampling. The last calibration on file was from 1998. This is probably the right one for this data set, but it is not certain. Calibration sampling in 1998 showed that most samples were within +/- 0.005psu, so a reasonable estimate for this cruise is +/-0.01psu. *FILE START TIME : UTC 2000/03/30 14:09:04.660 END TIME : UTC 2000/03/30 14:12:15.080 NUMBER OF RECORDS : 80 DATA DESCRIPTION : CTD FILE TYPE : ASCII DATA TYPE : real*4 NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum ! -- ----------------------- ---------------- -------------- -------------- 1 Pressure decibar 1.078889 79.83778 2 Temperature 'deg C (IPTS68)' 7.672873 8.327647 3 Salinity PSS-78 31.24654 33.20242 4 Number_of_bin_records n/a 18 68 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places ! -- ---- ----- ----- ------ ------ -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 8 F REAL*4 3 4 ' ' ' ' 5 I I 0 $END $REMARKS File name : beam0024.ACQ $END *ADMINISTRATION MISSION : 2000-36 AGENCY : PBS PROJECT : beam SCIENTIST : Beamish R. PLATFORM : W.E. Ricker *LOCATION GEOGRAPHIC AREA : SoG/JdeF STATION : Sombrio Pt EVENT NUMBER : 24 LATITUDE : 48 28.21000 N ! (deg min) LONGITUDE : 124 20.95000 W ! (deg min) LATITUDE 2 : 48 28.22000 N ! (deg min) LONGITUDE 2 : 124 20.96000 W ! (deg min) WATER DEPTH : 104 $REMARKS Station Latitude : 0 0.00 N Longitude : 0 0.00 W Depth : 9999 $END *INSTRUMENT TYPE : Guildline 8715 CTD MODEL : 87107 SERIAL NUMBER : 53501 $REMARKS Acquisition program : CTD.EXE version 1.47 CTD data type : 2 ! 8755 system binary frame Control String : KP2000TC $END *RAW START TIME : UTC 1990/03/30 14:09:04.660 END TIME : UTC 1990/03/30 14:12:15.080 TIME INCREMENT : 0 0 0 0 40 ! (day hr min sec ms) NUMBER OF RECORDS : 4330 $TABLE: CHANNELS ! Name Raw Units ! -------------------- ---------- Pressure Percent_FS Temperature 'DEG C (ITS68)' Conductivity_Ratio n/a $END *CALIBRATION $TABLE: RAW CHANNELS ! Name Units Fmla Pad Coefficients ! -------------------- --------------- ---- ------ ------------ Pressure dBars 10 -99 (0 2000) Temperature 'DEG C (ITS68)' 10 -99 (-0.27318E-02 0.999875) Conductivity_Ratio n/a 63 -99 (0.503156E-04 0.999729) $END $TABLE: CALCULATED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 130 -99 (Pressure Temperature Conductivity_Ratio) () $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! -------- ------ ---------- -------- --------- --------- ACQCONV 2.02 2005/05/19 15:44:48 4330 4330 CALIB 11.4 2005/05/20 15:29:08 4330 4330 CLEAN 4.8 2005/05/20 15:29:35 4330 4330 DESPIKE 2.3 2005/05/20 16:42:14 4330 4330 TIMECOMP 4.2 2005/05/20 16:43:52 46877 4330 DELETE 6.3 2005/05/20 16:48:44 4330 3098 FILTERS 4.3 2005/05/20 17:06:36 3098 3098 CTDEDIT 4.60 2005/05/20 17:51:06 3098 3008 BINAVE 4.1 2005/05/20 18:05:04 3008 80 REMOVECH 7.0 2005/05/21 14:23:40 80 80 HDREDIT2 2.5 2005/05/21 14:34:30 ? ? $END $REMARKS -The following CALIB parameters were used: Calibration type = Raw Mode: UNION - calibration specs from Header and Cal File. Salinity is computed Calibration file = Q:\Cruise_Data\2000-36\DOC\2000-36CAL.CCF Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 1 Pressure dBars 10 0.0000000E+00 0.2000000E+04 2 Temperature DEG C (IT 10 -0.2731800E-02 0.9998750E+00 3 Conductivity_Ratio n/a 63 0.5031560E-04 0.9997290E+00 Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 4 Salinity PSS-78 130 Pressure Temperature Conductivity_Ratio -CLEAN functions: 2005/05/20 15:29:29 20 Interpolation by Record Number, in All Channels -The following DESPIKE parameters were used: DESPIKE TABLE CHANNEL FIT OVER- MIN MAX MIN MAX SPIKE WIDTH LAP VALUE VALUE STDDEV STDDEV TOL. -------------------- ----- ----- ------- ------- ------- ------- ----- Pressure 55 2 -2.00 4000.00 0.10000 999.000 3.00 Temperature 55 2 -2.00 25.00 0.00500 999.000 3.00 Conductivity_Ratio 55 2 0.00 5.00 0.00010 999.000 3.00 -The following TIMECOMP parameters were used: Temp. probe Dist (m): 0.0700 Sample period (sec): 0.0400 -The following DELETE parameters were used: Surface Record Removal: Low Sal & Last Press Min Maximum Surface Pressure (relative): 10.00 Minimum Surface Salinity: 5.000 Surface Swell Pressure Tolerance: 1.00 Pressure filtered over width: 11 Swells deleted. Warning message if pressure difference of 2.00 Drop rates < 0.30m/s (calculated over 11 points) will be deleted. Drop rate applies in the range 10.00 to 70.15 dbars Sample interval (from user input) = 0.040 seconds. -The following FILTER parameters were used. Median filter was used. Filter width = 15 The following channel(s) were filtered. Salinity -CTDEDIT 2005/05/20 17:51:06 90 records were deleted in this editing session. 5 changes in channel Salinity -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 1.00 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -REMOVECH 2005/05/21 14:23:40 The following CHANNEL(S) were removed: Conductivity_Ratio -HEADER EDITS: 2005/05/21 14:34:30 Applied edit header: Q:\Cruise_Data\2000-36\DOC\2000GLD.hdr Channel 1: Pressure [decibar] Units: dBars ==> decibar Format: F10.2 ==> F7.1 Channel 2: Temperature [deg C (IPTS68)] Units: DEG C (ITS68) ==> deg C (IPTS68) Format: F12.4 ==> F9.4 Channel 3: Salinity [PSS-78] Format: F9.4 ==> F8.3 $END !--1--- ---2---- ---3--- -4-- !Pressu Temperat Salinit Numb !re ure y er_o ! ~bin ! _rec ! ords !------ -------- ------- ---- *END OF HEADER 1.1 8.2805 31.247 18 2.0 8.3190 31.266 21 3.0 8.3276 31.275 21 4.0 8.3242 31.284 21 5.1 8.3214 31.284 22 6.0 8.3116 31.292 38 7.0 8.2947 31.303 35 8.0 8.2537 31.332 36 9.0 8.2294 31.356 35 10.0 8.2016 31.381 31 11.0 8.1763 31.408 28 12.0 8.1623 31.425 31 13.0 8.1567 31.433 35 14.0 8.1547 31.435 37 15.0 8.1540 31.436 34 16.0 8.1514 31.439 32 17.0 8.1441 31.446 34 18.0 8.1349 31.453 36 19.0 8.1238 31.461 34 20.0 8.1167 31.468 31 21.0 8.1068 31.481 30 22.0 8.1047 31.485 31 23.0 8.0993 31.488 33 24.0 8.0934 31.494 38 25.0 8.0931 31.507 35 26.0 8.0979 31.524 36 27.0 8.0866 31.551 37 28.0 8.0811 31.566 31 29.0 8.0783 31.574 28 30.0 8.0772 31.581 33 31.0 8.0774 31.583 37 32.0 8.0777 31.584 34 33.0 8.0777 31.587 30 34.0 8.0733 31.600 40 35.0 8.0713 31.608 46 36.0 8.0699 31.613 33 37.0 8.0689 31.616 28 38.0 8.0686 31.621 27 39.0 8.0700 31.637 27 40.0 8.0695 31.642 28 41.0 8.0689 31.646 46 41.9 8.0666 31.661 54 43.0 8.0635 31.677 34 44.0 8.0613 31.690 28 45.0 8.0600 31.696 26 46.0 8.0559 31.711 26 47.0 8.0496 31.735 27 48.0 8.0456 31.755 41 49.0 8.0431 31.769 57 50.0 8.0397 31.791 37 51.0 8.0398 31.798 30 52.0 8.0406 31.802 30 53.0 8.0409 31.805 30 54.0 8.0406 31.815 33 55.0 8.0308 31.869 40 56.0 8.0204 31.928 55 57.0 8.0173 31.946 45 58.0 8.0167 31.950 43 59.0 8.0163 31.951 39 60.0 8.0143 31.958 33 61.0 8.0124 31.966 39 62.0 8.0099 31.975 57 63.0 8.0067 31.988 48 64.0 8.0044 31.998 49 65.0 8.0031 32.003 44 66.0 8.0008 32.012 46 67.0 7.9965 32.029 46 68.0 7.9912 32.048 53 69.0 7.9793 32.085 55 70.0 7.9766 32.094 49 71.0 7.9747 32.101 56 72.0 7.9717 32.114 54 73.0 7.9424 32.243 47 74.0 7.8996 32.434 48 75.0 7.8899 32.481 60 76.0 7.8672 32.568 68 76.9 7.8144 32.758 46 78.0 7.7292 33.025 34 79.0 7.6761 33.194 38 79.8 7.6729 33.202 45