*2013/12/16 15:22:19.78 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : UTC 2000/10/04 01:49:54.000 TIME INCREMENT : 0 0 0 0.416667E-01 0 ! (day hr min sec ms) NUMBER OF RECORDS : 9 DATA DESCRIPTION : Bottle:Rosette:Up:Stop + CTD:Up FILE TYPE : ASCII NUMBER OF CHANNELS : 14 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- --------------------------- --------------- -------------- -------------- 1 Sample_Number n/a 505 513 2 Pressure decibar 2.3 140.1 3 Temperature:Primary 'deg C (ITS90)' 7.1119 13.6823 4 Salinity:T0:C0 PSS-78 32.0154 33.8829 5 Transmissivity %/metre 44.7 62 6 Fluorescence:URU:Seapoint mg/m^3 0.3E-02 2.096 7 PAR uE/m^2/sec 19.5 40.2 8 Bottle_Number n/a 1 9 9 Oxygen:Dissolved mL/L 1.58 6.27 10 Salinity:Bottle PSS-78 33.7065 33.8864 11 Phosphate umol/L 0.47 2.74 12 Nitrate_plus_Nitrite umol/L 1.8 34.7 13 Silicate umol/L 9.4 55.5 14 Ammonium umol/L 0.13 0.18 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 5 I I 0 2 -99 ' ' 7 F ' ' 1 3 -99 ' ' 9 F ' ' 4 4 -99 ' ' 9 F ' ' 4 5 -99 ' ' 6 F ' ' 1 6 -99 ' ' 8 F ' ' 3 7 -99 ' ' 7 F ' ' 1 8 -99 ' ' 3 I I 0 9 -99 ' ' 7 F ' ' 2 10 -99 ' ' 9 F R4 4 11 -99 ' ' 7 F R4 2 12 -99 ' ' 6 F R4 1 13 -99 ' ' 6 F R4 1 14 -99 ' ' 7 F R4 2 $END $REMARKS This file converted from Sea-Bird file: d:\2000-30\20300134.ros Comments from secondary file: d:\2000-30\20300134.DOX ----------------------------------------------------- Raw data in file oxydata\2030\20300134.o2 VIO3 = 10.02 ! Volume of iodate standard (cm**) NIO3 = 0.01013126 ! Normality of iodate standard VREG = 2.0 ! Volume of sample displaced by reagents (cm**3) DOREG = 0.0017 ! Absolute amount of O2 added with reagents (ml) $END *ADMINISTRATION MISSION : 2000-30 AGENCY : IOS, Ocean Science and Productivity, Sidney, BC COUNTRY : Canada PROJECT : Laperouse, Eddies SCIENTIST : Mackas D. PLATFORM : John P. Tully *LOCATION GEOGRAPHIC AREA : Line P, N.E. Pacific STATION : LG4 EVENT NUMBER : 134 LATITUDE : 49 11.28000 N ! (deg min) LONGITUDE : 126 49.32000 W ! (deg min) WATER DEPTH : 146 *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-911plus SERIAL NUMBER : 0585 $TABLE: SENSORS ! Name Abs Depth Serial No ! ----------------- -------------- ---------- temperature ' ' primary conductivity ' ' primary pressure ' ' 77511 temperature ' ' secondary conductivity ' ' secondary Seapoint ' ' ' ' transmissometer ' ' 192D irradiance ' ' 4565 surface ' ' 'degrees = 0.0' $END $REMARKS SOFTWARE VERSION SEASAVE WIN32 V1.18 Comments from secondary file: d:\2000-30\20300134.DOX ----------------------------------------------------- Dissolved oxygen concentration determined using an automated titration system consisting of a Brinkman dosimat (model 665) and a PC 900 Colorimeter. $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- SBE_IOS 1.5 2000/11/06 14:40:28 873 873 DESPIKE 1.5 2000/11/06 14:43:32 873 873 BINAVE 3.0 2000/11/06 15:07:16 873 9 MERGE 2.42 2000/11/06 19:38:27 9 9 MERGE 2.5.1 2000/10/19 11:41:42 9 9 MERGE 2.6.1 2001/10/22 15:30:24 9 9 REORDER 1.1 2001/10/22 15:34:42 ? ? REMOVECH 6.0 2001/10/23 09:52:28 9 9 CALIB 10.0 2001/10/23 10:35:33 9 9 HDREDIT2 1.2 2001/12/24 11:32:04 ? ? CALIB 10.2 2002/01/31 16:32:09 9 9 HDREDIT2 1.3 2002/01/31 16:34:23 ? ? HDREDIT2 1.51 2003/04/21 14:00:33 ? ? CLEAN 4.2 2003/04/21 14:01:23 9 9 SORT 3.4.1 2004/04/14 15:42:58 9 9 CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:22:19 9 9 $END $REMARKS -The following DESPIKE parameters were used: DESPIKE TABLE CHANNEL FIT OVER- MIN MAX MIN MAX SPIKE WIDTH LAP VALUE VALUE STDDEV STDDEV TOL. -------------------- ----- ----- ------- ------- ------- ------- ----- Pressure 55 5 0.00 4500.00 0.10000 999.000 3.00 Temperature:Primary 55 5 1.00 19.00 0.00100 999.000 3.00 Temperature:Secondar 55 5 1.00 19.00 0.00100 999.000 3.00 Salinity:T0:C0 55 5 30.00 35.00 0.00100 999.000 3.00 Salinity:T1:C1 55 5 30.00 35.00 0.00100 999.000 3.00 -The following BINAVE parameters were used: Bin channel = Sample_Number Averaging interval = 1.0 Minimum bin value = 0.000 Bin value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following MERGE parameters were used: Merge Channel: Sample_Number Merge Scheme Used: Interweave Records from Both Files Overlap Scheme Used: Keep Primary Primary Channels to Include: Pressure, Temperature:Primary, Temperature:Secondary, Salinity:T0:C0, Salinity:T1:C1, Transmissivity, Chl_fluorescence:Seapoint, Irradiance (PAR), Bottle_Number Secondary Channels to Include: Dissolved_Oxygen:volume Primary file : d:\2000-30\20300134.AVG Secondary file: d:\2000-30\20300134.DOX Comments from secondary file: d:\2000-30\20300134.DOX ----------------------------------------------------- C.H. Culbertson's paper on Dissolved Oxygen in the 'Woce Hydrographic Program Operations and Methods - July 1991' -The following OXYCALC parameters were used Blank = 0.005 Sodium Thiosulfate concentration = 0.717 Volume of iodate standard (cm**3) = 10.02 Enter Normalitity of iodate standard = 0.01013130 -The following MERGE parameters were used: Merge Channel: Sample_Number Merge Scheme Used: Add Secondary to Primary Overlap Scheme Used: Keep Primary Primary Channels to Include: Pressure, Temperature:Primary, Temperature:Secondary, Salinity:T0:C0, Salinity:T1:C1, Transmissivity, Chl_fluorescence:Seapoint, Irradiance_PAR, Bottle_Number, Dissolved_Oxygen:volume Secondary Channels to Include: salinity:bottle Primary file : d:\data\2000\2000-30\20300134.TAB Secondary file: d:\data\2000\2000-30\20300134.SAL -The following MERGE parameters were used: Merge Channel: Sample_Number Merge Scheme Used: Add Secondary to Primary Overlap Scheme Used: Keep Primary Primary Channels to Include: Pressure, Temperature:Primary, Salinity:T0:C0, Transmissivity, Chl_fluorescence:Seapoint, Irradiance_PAR, Bottle_Number, Dissolved_Oxygen:volume, salinity:bottle Secondary Channels to Include: PO4, NO3, SiO3, NH4, chl Primary file : D:\DATA\2000\2000-30\20300134.hyd Secondary file: D:\DATA\2000\2000-30\20300134.rev -The following CHANNEL(S) were removed from file. Chlorophyll -The following CALIB parameters were used: Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = d:\data\2000\2000-30\2030_cor.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 4 Salinity:T0:C0 PSS-78 10 0.1800000E-01 0.1000000E+01 -The following CALIB parameters were used: Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = M:\Data\Fluor\PENA\2000-30\2030PARFL.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 6 Chl_fluorescence:Seapoint ug/l 10 -0.6000000E-01 0.1000000E+01 CLEAN functions: - Reset #RECS, MIN & MAX values in header. - Change Pad Value to -99 in All Channels. - Delete Empty Channels: 0 deleted. - Set channel name post-colon letters to upper case. - Remove Sea-Bird comments from the header. -The following SORT parameters were used. Sorted by channel: Pressure Pressure channel sorted according to values in sort channel $END *COMMENTS ************************************************************************* There is some doubt about the calibration of the chl_fluorescence channel. See the processing notes for details. ************************************************************************* Collection method: ------------------ A rosette, holding 24 ten-litre water samplers, with a CTD was used. Analysis methods: ----------------- Salinity samples are collected in glass bottles and analyzed on Guildline model 8410 Portasal Salinometers which are standardized with IAPSO standard seawater. Oxygen samples are analyzed on an automated Winkler titration system following the procedures of Carpenter (1965). A Brinkmann model 665 Dosimat and model PC910 Colorimeter is controlled by Visual-Basic program to titrate the oxygen samples. Nutrient samples are analyzed fresh on board using a Technicon AAII auto- analyzer following methods described in Barwell-Clarke and Whitney (1996). Chlorophyll samples are collected in duplicate in calibrated polycarbonate bottles (~330ml), then filtered onto 25mm MFS GF/75 filters at <70mmHg vacuum. The filters are placed in glass scintillation vials and immediately frozen at -20ºC until analysis. The chlorophyll is extracted in 10 ml of 90% acetone for 24h at -20ºC, then brought to room temperature and the extract is decanted and measured using a Turner Designs 10-AU-005-CE fluorometer, which has been calibrated with solutions of commercially prepared chlorophyll. References: 1. Carpenter, J.H. 1965. The Chesapeake Bay Institute Technique for the Winkler Dissolved Oxygen Method. Limmnol. & Oceanogr., 10: 141-143. 2. J. Barwell-Clarke and F. Whitney. 1996. Institute of Ocean Sciences Nutrient Methods and Analysis. Canadian Technical Report of Hydrography and Ocean Sciences, No. 182, 43 pp. *CALIBRATION $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! --------------------------- -------- ---- ------ ------------ Salinity:T0:C0 PSS-78 10 -9.99 () (0.18E-01 1) Chl_fluorescence:Seapoint ug/l 10 -9.99 () (-0.6E-01 1) $END !-1-- --2--- ---3---- ---4---- --5-- ---6--- --7--- 8- --9--- ---10--- --11-- --12- --13- --14-- !Samp Pressu Temperat Salinity Trans Fluores PAR Bo Oxygen Salinity Phosph Nitra Silic Ammoni !le_ re ure: :T0:C0 missi cence: tt : :Bottle ate te_ ate um !Numb Primary vity URU: ~u Dissol plus_ !er Seapoin mb ved Nitri ! t er te !---- ------ -------- -------- ----- ------- ------ -- ------ -------- ------ ----- ----- ------ *END OF HEADER 513 2.3 13.6823 32.0194 44.7 2.096 40.2 9 6.27 -99.0000 0.47 1.8 9.5 0.17 512 10.4 13.6696 32.0154 45.5 2.088 25.5 8 -99.00 -99.0000 0.50 1.9 9.4 0.18 511 19.9 11.8898 32.4402 53.8 1.633 20.9 7 6.14 -99.0000 0.72 4.2 10.0 0.17 510 28.9 9.9140 32.5581 59.3 0.565 20.3 6 -99.00 -99.0000 1.10 10.4 16.6 0.13 509 50.3 8.2699 32.6866 62.0 0.076 19.7 5 6.25 -99.0000 1.01 9.2 12.4 0.14 508 76.7 7.9251 32.9625 62.0 0.017 19.6 4 5.28 -99.0000 1.37 15.4 18.7 0.16 507 99.3 7.6325 33.7008 60.0 0.003 19.5 3 2.77 33.7065 2.22 29.0 38.3 0.15 506 125.5 7.1170 33.8782 52.0 0.008 19.5 2 -99.00 33.8803 2.72 34.4 54.7 -99.00 505 140.1 7.1119 33.8829 50.6 0.008 19.5 1 1.58 33.8864 2.74 34.7 55.5 -99.00