*2013/12/16 15:22:15.37 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : UTC 2000/10/07 06:33:21.000 TIME INCREMENT : 0 0 0 0.416667E-01 0 ! (day hr min sec ms) NUMBER OF RECORDS : 43 DATA DESCRIPTION : CTD FILE TYPE : ASCII DATA TYPE : REAL*4 NUMBER OF CHANNELS : 6 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- --------------------------- --------------- -------------- -------------- 1 Pressure decibar 1.3 44 2 Temperature:Primary 'deg C (ITS90)' 9.1869 11.5824 3 Transmissivity %/metre 34.4 58.4 4 Fluorescence:URU:Seapoint mg/m^3 0.15 5.363 5 Salinity:T0:C0 PSS-78 31.5923 32.5336 6 Number_of_bin_records n/a 9 60 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 6 F ' ' 1 4 -99 ' ' 8 F ' ' 3 5 -99 ' ' 9 F ' ' 4 6 -99 ' ' 5 I I 0 $END $REMARKS This file converted from Sea-Bird file: V:\CTD\2000-28\derive\20280004.cnv $END *ADMINISTRATION MISSION : 2000-28 AGENCY : IOS, Ocean Science and Productivity, Sidney, B.C. COUNTRY : Canada PROJECT : Laperouse, Juan de Fuca SCIENTIST : Juhasz T. PLATFORM : John P. Tully *LOCATION GEOGRAPHIC AREA : WCVI /Juan de Fuca STATION : LD03 EVENT NUMBER : 4 LATITUDE : 48 56.65000 N ! (deg min) LONGITUDE : 125 50.41000 W ! (deg min) WATER DEPTH : 48 *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-911plus SERIAL NUMBER : 0585 $TABLE: SENSORS ! Name Abs Depth Serial No ! ----------------- -------------- ---------- temperature ' ' primary conductivity ' ' primary pressure ' ' 77511 temperature ' ' secondary conductivity ' ' secondary Seapoint ' ' ' ' transmissometer ' ' 192D irradiance ' ' 4565 surface ' ' 'degrees = 0.0' $END $REMARKS SOFTWARE VERSION SEASAVE WIN32 V1.18 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- SBE_IOS 1.6 2000/12/04 15:06:39 4589 4589 DELETE 4.4 2000/12/04 15:54:41 4589 1489 CTDEDIT 4.41 2000/12/04 16:32:35 1489 1406 BOXCAR 4.1 2002/03/17 14:57:46 1406 1406 BINAVE 4.0.1 2002/03/24 14:33:17 1406 43 CALIB 10.2 2002/03/24 14:34:15 43 43 CALIB 10.2 2002/03/24 14:34:41 43 43 REMOVECH 6.0 2002/03/24 14:35:02 43 43 REORDER 1.1 2002/03/24 14:35:09 ? ? HDREDIT2 1.9 2004/03/31 14:39:18 ? ? CLEAN 4.5 2004/03/31 14:39:57 43 43 HDREDIT2 2.5.1 2006/02/12 11:26:31 ? ? CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:22:15 43 43 $END $REMARKS -The following DELETE parameters were used: Surface Record Removal: Last Press Min Maximum Surface Pressure (relative): 10.00 Surface Swell Pressure Tolerance: 1.00 Pressure filtered over width: 25 Swells deleted. Warning message if pressure difference of 2.00 Drop rates< 0.30m/s (calculated over 15 points) will be deleted Sample interval = 0.04 seconds. -The following FILTER parameters were used. Median filter was used. Filter width = 11 The following channel(s) were filtered. Chl_fluorescence:Seapoint -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 1.0 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CALIB parameters were used: Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = Q:\CTD\2000-28\2028rcal.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 9 Salinity:T0:C0 PSS-78 10 0.2100000E-01 0.1000000E+01 10 Salinity:T1:C1 PSS-78 10 0.1700000E-01 0.1000000E+01 -The following CALIB parameters were used: Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = Q:\CTD\2000-28\2028fl.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 8 Chl_fluorescence:Seapoint ug/l 10 -0.6000000E-01 0.1000000E+01 -The following CHANNEL(S) were removed from file. Scan_Number Temperature:Secondary Conductivity:Primary Conductivity:Secondary Salinity:T1:C1 Flag CLEAN functions: - Reset #RECS, MIN & MAX values in header. - Change Pad Value to -99 in All Channels. - Delete Empty Channels: 0 deleted. -HEADER EDITS: 2006/02/12 11:26:31 Applied edit header: O:\Data Processing\Header Comments\Work\MISSION.TXT $END *COMMENTS SBE HEADER Sea-Bird SBE 9 Raw Data File: FileName = C:\data\2000-28\20280003.dat Software Version Seasave Win32 v1.18 Temperature SN = 2663 Conductivity SN = 2399 Number of Bytes Per Scan = 30 Number of Voltage Words = 4 Number of Scans Averaged by the Deck Unit = 1 System UpLoad Time = Oct 07 2000 06:33:21 NMEA Latitude = 48 56.65 N NMEA Longitude = 125 50.41 W NMEA UTC (Time) = Oct 07 2000 06:33:21 Store Lat/Lon Data = Add to Header Only Ship: J.P. TULLY Cruise: 2000-28 Station: LD03 Depth: 48 Latitude: Longitude: # nquan = 11 # nvalues = 4589 # units = metric # name 0 = scan: scan number # name 1 = pr: pressure [db] # name 2 = t090: temperature, pri, ITS-90 [deg C] # name 3 = t190: temperature, sec, ITS-90 [deg C] # name 4 = c0S/m: conductivity, primary [S/m] # name 5 = c1S/m: conductivity, secondary [S/m] # name 6 = xmiss: transmissometer # name 7 = SPFluor: Seapoint Fluorometer [ęg/l] # name 8 = sal00: salinity, PSS-78 [PSU], T0, C0 # name 9 = sal11: salinity, PSS-78 [PSU], T1, C1 # name 10 = flag: 0.000e+00 # span 0 = 1, 4589 # span 1 = 0.396, 44.437 # span 2 = 9.1849, 11.6215 # span 3 = 9.1861, 11.6362 # span 4 = 3.494001, 3.613701 # span 5 = 3.494199, 3.614894 # span 6 = 4.5543, 87.5150 # span 7 = 1.722e-01, 1.115e+01 # span 8 = 30.6626, 32.5141 # span 9 = 31.2319, 32.5181 # span 10 = 0.000e+00, 0.000e+00 # interval = seconds: 0.0416667 # start_time = Oct 07 2000 06:33:21 # bad_flag = -9.990e-29 # sensor 0 = Frequency 0 temperature, primary, 2663, 07-Mar-00 # sensor 1 = Frequency 1 conductivity, primary, 2399, 03-Mar-00, cpcor = -9.57 00e-08 # sensor 2 = Frequency 2 pressure, 77511, 13-Mar-00 # sensor 3 = Frequency 3 temperature, secondary, 2371 # sensor 4 = Frequency 4 conductivity, secondary, 2424, 03-Mar-00, cpcor = -9. 5700e-08 # sensor 5 = Extrnl Volt 0 Seapoint Fluorometer # sensor 6 = Extrnl Volt 2 transmissometer, 192D, 20-Jun-99 # sensor 7 = Extrnl Volt 4 irradiance (PAR), 4565, JULY_2000 # sensor 8 = Extrnl Volt 7 surface irradiance (SPAR), degrees = 0.0 # datcnv_date = Dec 01 2000 14:56:30, 4.244 # datcnv_in = 20280004.DAT 20280001.CON # datcnv_skipover = 0 # alignctd_date = Dec 01 2000 16:44:06, 4.244 # alignctd_in = 20280004.CNV # alignctd_cond_advSecs = -0.018, -0.018 # alignctd_temp_advSecs = 0.000, 0.000 # alignctd_oxygen_current_advSecs = 0.000, 0.000 # alignctd_oxygen_temp_advSecs = 0.000, 0.000 # alignctd_wetstar_advSecs = 0.000 # wildedit_date = Dec 01 2000 17:51:56, 4.244 # wildedit_in = 20280004.CNV # wildedit_pass1_nstd = 2.0 # wildedit_pass2_nstd = 5.0 # wildedit_npoint = 50 # wildedit_vars = pr t090 t190 c0S/m c1S/m xmiss SPFluor sal00 sal11 # wildedit_excl_bad_scans = yes # celltm_date = Dec 01 2000 18:07:43, 4.244 # celltm_in = 20280004.CNV # celltm_alpha = 0.0300, 0.0300 # celltm_tau = 9.0000, 9.0000 # celltm_temp_sensor_use_for_cond = primary, secondary # strip_date = Dec 02 2000 10:33:49, 4.244 # strip_in = 20280004.CNV # derive_date = Dec 02 2000 10:49:26, 4.244 # derive_in = 20280004.CNV 20280001.CON # file_type = ascii END* CTDEDIT was used to remove records corrupted by shed wakes at 37m and 39-41m and to clean salinity at the surface and at 8m. ***The CTD Log mentions a problem with the flow rate to the fluorometer; the data is very noisy and should be used with caution.******** *CALIBRATION $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! --------------------------- -------- ---- ------ ------------ Salinity:T0:C0 PSS-78 10 -9.99 () (0.21E-01 1) Salinity:T1:C1 PSS-78 10 -9.99 () (0.17E-01 1) Chl_fluorescence:Seapoint ug/l 10 -9.99 () (-0.6E-01 1) $END !--1--- ---2---- --3-- ---4--- ---5---- -6-- !Pressu Temperat Trans Fluores Salinity Numb !re ure: missi cence: :T0:C0 er_o ! Primary vity URU: ~bin ! Seapoin _rec ! t ords !------ -------- ----- ------- -------- ---- *END OF HEADER 1.3 11.5717 34.4 2.732 31.5947 21 1.9 11.5717 39.5 3.248 31.5945 37 3.1 11.5822 40.3 3.373 31.5953 26 4.0 11.5824 39.8 3.950 31.5948 26 5.1 11.5737 40.0 4.338 31.5948 41 6.1 11.5656 40.2 3.071 31.5941 28 7.0 11.5555 40.1 3.130 31.5940 31 8.0 11.4954 40.0 3.313 31.5936 32 9.0 11.4375 38.8 3.230 31.5928 43 10.0 11.4231 37.4 4.101 31.5928 51 11.0 11.4288 37.7 4.321 31.5923 34 12.0 11.3928 36.7 4.115 31.5933 27 13.0 11.3654 36.4 4.890 31.5926 36 14.0 11.2975 36.3 5.162 31.5980 60 15.0 11.1471 35.7 4.372 31.6266 43 16.0 11.0052 36.4 5.363 31.6400 32 17.0 10.9176 40.5 3.841 31.6700 36 18.0 10.9008 40.8 2.530 31.6823 31 19.0 10.8227 41.0 2.719 31.7044 25 20.0 10.7417 42.1 2.837 31.7264 28 21.0 10.6733 42.9 3.188 31.7445 36 22.0 10.5672 45.0 3.438 31.7769 39 23.0 10.4789 47.4 3.353 31.8112 29 24.0 10.3734 50.5 1.101 31.8368 40 25.0 10.2680 53.0 1.141 31.8626 29 26.0 10.2582 54.5 0.694 31.8706 19 27.0 10.1348 55.0 0.723 31.9021 23 28.1 10.0944 55.6 0.812 31.9091 30 28.9 10.0466 57.4 0.384 31.9714 36 30.0 9.9652 58.4 0.243 32.0492 19 31.0 9.8672 58.2 0.211 32.1162 17 32.0 9.8288 58.3 0.239 32.1386 20 33.1 9.7548 58.2 0.201 32.1847 29 34.0 9.7083 57.9 0.176 32.2115 35 35.0 9.6491 57.6 0.150 32.2465 23 36.1 9.5945 57.9 0.166 32.2781 31 37.0 9.4863 57.5 0.185 32.3422 31 38.0 9.2323 55.2 0.188 32.4980 18 38.9 9.2032 53.1 0.247 32.5138 24 41.2 9.1909 49.6 0.443 32.5262 16 42.4 9.1873 49.9 0.435 32.5320 9 43.0 9.1869 49.7 0.496 32.5336 37 44.0 9.1869 49.4 0.315 32.5335 52