*2013/12/16 15:21:51.20 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *COMMENTS Alt S start 23:54:07 10-11-2000 GPS not used. Alt S stop 00:00:43 10-12-2000 GENERAL WARNING: Due to intermittent problems with the temperature signal for the Guildline CTD the quality of temperature and salinity data is doubtful. Investigators are encouraged to read the processing report before using this data. Casts for which severe problems were noted have special warnings in the headers. The salinity should be considered to be +/-0.01units at best and errors as large as 0.25units of salinity have been noted. This implies errors in temperature of up to 0.25C degrees. *FILE START TIME : UTC 2000/10/11 23:54:07.260 END TIME : UTC 2000/10/12 00:00:43.730 TIME INCREMENT : 0 0 0 0 40 ! (day hr min sec ms) TIME ZERO : UTC 1970/01/01 00:00:00.000 NUMBER OF RECORDS : 68 DATA DESCRIPTION : CTD FILE TYPE : ASCII NUMBER OF CHANNELS : 5 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- ---------------- -------------- -------------- 1 Pressure decibar 0.7 33.8 2 Temperature 'deg C (IPTS68)' 6.8006 6.8054 3 Transmissivity %/metre 28.8 36.1 4 Salinity PSS-78 31.28 31.28 5 Number_of_bin_records n/a 2 11 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ------ -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 6 F ' ' 1 4 -99 ' ' 7 F REAL*4 2 5 -99 ' ' 5 I I 0 $END $REMARKS File name : GLD-0185.ACQ $END *ADMINISTRATION MISSION : 2000-23 AGENCY : IOS, Ocean Science and Productivity, Sidney, B.C. COUNTRY : Canada PROJECT : ARCTIC 2000 SCIENTIST : van Hardenberg B. PLATFORM : Sir Wilfrid Laurier *LOCATION GEOGRAPHIC AREA : ARCTIC 2000 - Leg 4 STATION : B-9 EVENT NUMBER : 185 LATITUDE : 60 0.00000 N ! (deg min) LONGITUDE : 168 30.00000 W ! (deg min) LATITUDE 2 : 60 0.00000 N ! (deg min) LONGITUDE 2 : 168 30.00000 W ! (deg min) WATER DEPTH : $REMARKS Station Latitude : 60 0.00 N Longitude : 168 30.00 W Depth : $END *INSTRUMENT TYPE : Guildline Guildn CTD MODEL : Arctic SERIAL NUMBER : 43825 $REMARKS Acquisition program : CTD.EXE version 1.45 CTD data type : 2 ! 8755 system binary frame Control String : KP1000TC4 $END *RAW START TIME : UTC 2000/10/11 23:54:07.260 END TIME : UTC 2000/10/12 00:00:43.730 TIME INCREMENT : 0 0 0 0 40 ! (day hr min sec ms) NUMBER OF RECORDS : 9533 $TABLE: CHANNELS ! Averaging (day hr min sec ms) !Name Raw Units Interval Time Lag !-------------------- --------------- --------- ----------- Pressure Percent_FS Temperature 'DEG C (ITS68)' Conductivity_Ratio n/a Transmissivity Percent_FS $END *CALIBRATION $TABLE: RAW CHANNELS ! Name Units Fmla Pad Coefficients ! -------------------- --------------- ---- ------ ------------ Pressure dBars 10 -9.99 (-0.227331 999.4422) Temperature 'DEG C (ITS68)' 10 -9.99 (0.613305E-02 0.9995611) Conductivity_Ratio n/a 63 -9.99 (-0.871E-03 1.001) Transmissivity '%/25 cm' 10 -9.99 (115.66 -2.31422) $END $TABLE: CALCULATED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 130 -9.99 (Pressure Temperature Conductivity_Ratio) () $END $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Pressure dBars 10 -9.99 () (0.5 1) Salinity PSS-78 10 -9.99 () (-0.14E-01 1) Salinity PSS-78 10 -9.99 () (0.1E-01 1) $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- ACQCONV 2.02 2001/01/18 11:00:32 9533 9533 HDREDIT2 1.1 2001/01/18 12:48:05 ? ? CALIB 9.0 2001/02/01 10:40:47 9533 9533 ADTIMCH 2.01 2001/02/01 10:44:50 9533 9533 CLIP 1.2 2001/03/15 17:34:00 9533 3001 VIEW 5.02 2001/03/16 14:29:32 3001 3001 CLEAN 3.0.1 2001/03/16 14:46:07 3001 3001 TIMECOMP 4.0 2001/03/16 14:48:18 163523 3001 CLEAN 3.0.1 2001/03/16 14:50:13 3001 3001 CELLTM 1.2 2001/03/16 14:58:06 3001 3001 DERIVEDQ 2.5 2001/03/16 15:00:34 3001 3001 DELETE 5.0 2001/03/16 15:02:35 3001 471 BINAVE 4.0.1 2001/03/19 11:01:26 471 68 CALIB 10.0 2001/03/19 15:34:52 68 68 HDREDIT2 1.1 2001/04/12 11:25:27 ? ? REORDER 1.1 2001/04/12 12:08:42 ? ? CALIB 11.2 2003/12/08 14:29:19 68 68 HDREDIT2 1.9 2004/03/30 11:27:14 ? ? CLEAN 4.5 2004/03/30 11:27:47 68 68 CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:21:51 68 68 $END $REMARKS -The following CALIB parameters were used: Calibration type = Raw Mode: UNION - calibration specs from Header and Cal File. Salinity is computed Transmissivity converted to %/metre Pressure offset = 0.0 Calibration file = Q:\CTD\2000\2020cal.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 1 Pressure dBars 10 -0.2273310E+00 0.9994422E+03 2 Temperature DEG C (IT 10 0.6133050E-02 0.9995611E+00 3 Conductivity_Ratio n/a 63 -0.8710000E-03 0.1001000E+01 4 Transmissivity %/25 cm 10 0.1156600E+03 -0.2314220E+01 Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 5 Salinity PSS-78 130 Pressure Temperature Conductivity_Ratio -The following ADTIMCH parameters were used. Add record number. -The following CLIP parameters were used. Clip by Record Number Limits First Record,Last Record = 4500, 7500 Time Not Available in File CLEAN functions: - Reset #RECS, MIN & MAX values in header. -The following TIMECOMP parameters were used: Temp. probe Dist (m): 0.0000 Sample period (sec): 0.0400 CLEAN functions: - Reset #RECS, MIN & MAX values in header. - Interpolation by Channel 2: Pressure -The following CELLTM parameters were used. Value for alpha = 0.0800, Value for tau = 1.6000 -The following DERIVEQ parameters were used Reference channel for pressure is: Pressure Reference channel for temperature is: Temperature:cell Reference channel for conductivity ratio is: Conductivity_Ratio Reference channel for salinity is: Salinity Computed properties Derived Properties Ref Press Temp Type Replace ------------------ --------- --------- ------- Salinity Insitu Insitu YES -The following DELETE parameters were used: Surface Record Removal: Last Press Min Maximum Surface Pressure (relative): 20.00 Surface Swell Pressure Tolerance: 0.50 Pressure NOT filtered Swells deleted. Warning message if pressure difference of 2.00 Drop rates< 0.30m/s (calculated over 15 points) will be deleted Sample interval = 0.04 seconds. -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 0.5 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CALIB parameters were used: Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = Q:\CTD\2000\2000-22\Guildline\2022rcal.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 2 Pressure dBars 10 0.5000000E+00 0.1000000E+01 6 Salinity PSS-78 10 -0.1400000E-01 0.1000000E+01 -The following CALIB parameters were used: Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = Q:\Cruise_Data\2000-Arctic\2000-22-recal2.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 4 Salinity PSS-78 10 0.1000000E-01 0.1000000E+01 CLEAN functions: - Reset #RECS, MIN & MAX values in header. - Change Pad Value to -99 in All Channels. - Delete Empty Channels: 0 deleted. $END !--1--- ---2---- --3-- --4--- -5-- !Pressu Temperat Trans Salini Numb !re ure missi ty er_o ! vity ~bin ! _rec ! ords !------ -------- ----- ------ ---- *END OF HEADER 0.7 6.8021 34.0 31.28 2 1.0 6.8015 33.2 31.28 8 1.5 6.8006 28.8 31.28 9 2.0 6.8025 32.8 31.28 6 2.5 6.8021 33.6 31.28 5 3.0 6.8022 34.1 31.28 6 3.5 6.8025 34.6 31.28 8 4.0 6.8034 35.2 31.28 7 4.5 6.8028 35.3 31.28 6 5.0 6.8023 35.3 31.28 6 5.5 6.8033 35.4 31.28 6 6.0 6.8042 35.3 31.28 9 6.4 6.8038 35.5 31.28 8 6.9 6.8034 35.5 31.28 6 7.5 6.8041 35.8 31.28 5 8.0 6.8043 35.9 31.28 8 8.5 6.8044 35.7 31.28 7 9.0 6.8043 35.7 31.28 7 9.5 6.8045 35.5 31.28 8 10.0 6.8048 35.6 31.28 6 10.5 6.8048 35.5 31.28 7 11.0 6.8049 35.5 31.28 8 11.5 6.8049 35.7 31.28 8 12.0 6.8052 35.7 31.28 7 12.5 6.8053 35.8 31.28 6 13.0 6.8054 35.7 31.28 5 13.5 6.8054 35.5 31.28 6 14.0 6.8053 35.7 31.28 9 14.5 6.8054 35.9 31.28 6 15.0 6.8053 35.7 31.28 8 15.5 6.8054 35.6 31.28 9 16.0 6.8054 35.6 31.28 6 16.5 6.8050 35.9 31.28 5 17.0 6.8049 36.1 31.28 7 17.5 6.8047 35.9 31.28 5 18.0 6.8044 35.8 31.28 9 18.5 6.8049 35.4 31.28 6 19.0 6.8042 35.4 31.28 8 19.5 6.8042 35.4 31.28 8 20.0 6.8043 35.7 31.28 5 20.5 6.8043 35.7 31.28 5 21.0 6.8043 35.6 31.28 6 21.5 6.8046 35.7 31.28 5 22.0 6.8044 35.4 31.28 6 22.5 6.8044 35.4 31.28 9 23.0 6.8043 35.3 31.28 9 23.5 6.8042 35.5 31.28 7 23.9 6.8041 35.5 31.28 6 24.5 6.8041 35.4 31.28 7 25.0 6.8043 35.4 31.28 5 25.5 6.8043 35.4 31.28 7 26.0 6.8040 35.3 31.28 8 26.5 6.8041 35.5 31.28 7 26.9 6.8043 35.4 31.28 9 27.4 6.8044 35.1 31.28 6 28.0 6.8044 35.4 31.28 8 28.5 6.8044 35.5 31.28 6 29.0 6.8044 35.3 31.28 9 29.5 6.8044 35.3 31.28 8 30.0 6.8043 35.4 31.28 8 30.5 6.8047 35.3 31.28 8 31.0 6.8046 35.2 31.28 8 31.5 6.8051 35.1 31.28 9 32.0 6.8050 35.2 31.28 11 32.5 6.8049 35.4 31.28 8 33.0 6.8049 35.4 31.28 7 33.5 6.8049 35.5 31.28 5 33.8 6.8048 35.3 31.28 3