*2013/12/16 15:21:43.36 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *COMMENTS Station BD-22 Consec 082 Alt S start position Alt S stop position GENERAL WARNING: Due to intermittent problems with the temperature signal for the Guildline CTD the quality of temperature and salinity data is doubtful. Investigators are encouraged to read the processing report before using this data. Casts for which severe problems were noted have special warnings in the headers. The salinity should be considered to be +/-0.01units at best and errors as large as 0.25units of salinity have been noted. This implies errors in temperature of up to 0.25C degrees. *FILE START TIME : UTC 2000/08/22 00:37:01.350 END TIME : UTC 2000/08/22 00:41:54.210 TIME ZERO : UTC 1970/01/01 00:00:00.000 NUMBER OF RECORDS : 37 DATA DESCRIPTION : CTD FILE TYPE : ASCII NUMBER OF CHANNELS : 5 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- ---------------- -------------- -------------- 1 Pressure decibar 0 17.9 2 Temperature 'deg C (IPTS68)' 0.356E-01 6.8365 3 Transmissivity %/metre 39.4 55.8 4 Salinity PSS-78 17.31 22.43 5 Number_of_bin_records n/a 28 644 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ------ -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 6 F ' ' 1 4 -99 ' ' 7 F REAL*4 2 5 -99 ' ' 5 I I 0 $END $REMARKS File name : GLD-0082.ACQ $END *ADMINISTRATION MISSION : 2000-21 AGENCY : IOS, Ocean Science and Productivity, Sidney, B.C. COUNTRY : Canada PROJECT : ARCTIC 2000 SCIENTIST : Bigham R. PLATFORM : Sir Wilfrid Laurier *LOCATION GEOGRAPHIC AREA : ARCTIC 2000 - Leg 2 STATION : BD-22 EVENT NUMBER : 82 LATITUDE : 68 25.60000 N ! (deg min) LONGITUDE : 96 39.05000 W ! (deg min) LATITUDE 2 : 68 25.60000 N ! (deg min) LONGITUDE 2 : 96 39.05000 W ! (deg min) WATER DEPTH : 20 $REMARKS Station Latitude : 68 25.60N Longitude : 96 39.05 W Depth : 20 $END *INSTRUMENT TYPE : Guildline Guildn CTD MODEL : Arctic SERIAL NUMBER : 43825 $REMARKS Acquisition program : CTD.EXE version 1.45 CTD data type : 2 ! 8755 system binary frame Control String : KP1000TC4 $END *RAW START TIME : UTC 2000/08/22 00:37:01.350 END TIME : UTC 2000/08/22 00:41:54.210 TIME INCREMENT : 0 0 0 0 40 ! (day hr min sec ms) NUMBER OF RECORDS : 6942 $TABLE: CHANNELS ! Averaging (day hr min sec ms) !Name Raw Units Interval Time Lag !-------------------- --------------- --------- ----------- Pressure Percent_FS Temperature 'DEG C (ITS68)' Conductivity_Ratio n/a Transmissivity Percent_FS $END *CALIBRATION $TABLE: RAW CHANNELS ! Name Units Fmla Pad Coefficients ! -------------------- --------------- ---- ------ ------------ Pressure dBars 10 -9.99 (-0.227331 999.4422) Temperature 'DEG C (ITS68)' 10 -9.99 (0.613305E-02 0.9995611) Conductivity_Ratio n/a 63 -9.99 (-0.871E-03 1.001) Transmissivity '%/25 cm' 10 -9.99 (115.66 -2.31422) $END $TABLE: CALCULATED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 130 -9.99 (Pressure Temperature Conductivity_Ratio) () $END $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Pressure dBars 10 -9.99 () (0.5 1) Salinity PSS-78 10 -9.99 () (-0.14E-01 1) Salinity PSS-78 10 -9.99 () (0.1E-01 1) $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- ACQCONV 2.02 2001/01/17 14:14:55 6942 6942 HDREDIT2 1.1 2001/01/18 14:51:44 ? ? CALIB 9.0 2001/02/01 10:34:31 6942 6942 ADTIMCH 2.01 2001/02/01 10:37:19 6942 6942 CLIP 1.2 2001/03/19 16:10:55 6942 3001 VIEW 5.02 2001/03/19 16:57:07 3001 3001 CLEAN 3.0.1 2001/03/20 08:30:48 3001 3001 TIMECOMP 4.0 2001/03/20 08:31:54 44011 3001 CLEAN 3.0.1 2001/03/20 15:53:40 3001 3001 BINAVE 4.0.1 2001/03/20 16:05:56 3001 38 CALIB 10.0 2001/03/20 16:07:55 38 38 HDREDIT2 1.1 2001/04/12 11:08:14 ? ? REORDER 1.1 2001/04/12 12:09:29 ? ? CALIB 11.2 2003/12/08 14:26:24 38 38 HDREDIT2 1.9 2004/03/30 11:02:55 ? ? CLEAN 4.5 2004/03/30 11:04:14 38 38 CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:21:43 37 37 $END $REMARKS -The following CALIB parameters were used: Calibration type = Raw Mode: UNION - calibration specs from Header and Cal File. Salinity is computed Transmissivity converted to %/metre Pressure offset = 0.0 Calibration file = Q:\CTD\2000\2020cal.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 1 Pressure dBars 10 -0.2273310E+00 0.9994422E+03 2 Temperature DEG C (IT 10 0.6133050E-02 0.9995611E+00 3 Conductivity_Ratio n/a 63 -0.8710000E-03 0.1001000E+01 4 Transmissivity %/25 cm 10 0.1156600E+03 -0.2314220E+01 Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 5 Salinity PSS-78 130 Pressure Temperature Conductivity_Ratio -The following ADTIMCH parameters were used. Add record number. -The following CLIP parameters were used. Clip by Record Number Limits First Record,Last Record = 2000, 5000 Time Not Available in File CLEAN functions: - Reset #RECS, MIN & MAX values in header. -The following TIMECOMP parameters were used: Temp. probe Dist (m): 0.0000 Sample period (sec): 0.0400 CLEAN functions: - Reset #RECS, MIN & MAX values in header. - Interpolation by Channel 2: Pressure -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 0.5 Minimum bin value = -1.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CALIB parameters were used: Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = Q:\CTD\2000\2000-22\Guildline\2022rcal.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 2 Pressure dBars 10 0.5000000E+00 0.1000000E+01 6 Salinity PSS-78 10 -0.1400000E-01 0.1000000E+01 -The following CALIB parameters were used: Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = Q:\Cruise_Data\2000-Arctic\2000-22-recal2.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 4 Salinity PSS-78 10 0.1000000E-01 0.1000000E+01 CLEAN functions: - Reset #RECS, MIN & MAX values in header. - Change Pad Value to -99 in All Channels. - Delete Empty Channels: 0 deleted. $END !--1--- ---2---- --3-- --4--- -5-- !Pressu Temperat Trans Salini Numb !re ure missi ty er_o ! vity ~bin ! _rec ! ords !------ -------- ----- ------ ---- *END OF HEADER 0.0 6.1312 48.9 18.11 644 0.4 6.4031 48.7 17.80 200 0.9 6.8365 48.4 17.31 44 1.5 6.5040 47.9 17.66 34 2.0 6.2634 47.2 17.94 63 2.5 5.7513 45.5 18.42 28 3.0 5.6493 42.2 18.62 86 3.5 5.1389 45.2 19.28 55 4.0 4.9752 39.4 19.47 43 4.5 4.5125 45.5 19.90 43 5.0 4.4343 50.2 20.26 52 5.5 4.3289 50.5 20.57 38 6.0 3.9532 50.4 20.80 41 6.5 3.1898 51.8 21.05 45 7.0 2.6111 52.4 21.19 51 7.5 2.3121 52.8 21.29 41 8.0 2.0708 53.2 21.39 46 8.5 1.8023 53.6 21.46 46 9.0 1.6331 53.8 21.51 48 9.5 1.4710 54.2 21.59 49 10.0 1.2671 54.6 21.70 51 10.5 1.1310 54.7 21.78 44 11.0 1.0554 54.7 21.83 48 11.5 0.8990 54.8 21.92 41 12.0 0.6834 54.8 22.04 40 12.5 0.5613 55.0 22.10 38 13.0 0.4848 55.0 22.14 39 13.5 0.3841 55.1 22.20 33 14.0 0.3261 55.4 22.24 36 14.5 0.1888 55.7 22.33 32 15.0 0.1130 55.8 22.38 32 15.6 0.0761 55.6 22.42 225 16.0 0.0488 55.8 22.42 52 16.5 0.0416 55.7 22.42 40 17.0 0.0434 55.7 22.42 43 17.6 0.0414 55.7 22.42 66 17.9 0.0356 55.7 22.43 300