*2013/12/16 15:21:42.06 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *COMMENTS Alt S start 09:23:18 07-20-2000 GPS not used. Alt S stop 09:29:12 07-20-2000 CTDEDIT was used to clean salinity throughout. GENERAL WARNING: Due to intermittent problems with the temperature signal for the GUILDLINE CTD the quality of temperature and salinity data is doubtful. Investigators are encouraged to read the processing report before using this data. Casts for which severe problems were noted have special warnings in the headers. The salinity should be considered to be +/-0.01units at best and errors as large as 0.25units of salinity have been noted. This implies errors in temperature of up to 0.25C degrees. PARTICULAR WARNING: This cast has poor validation with bottles. See Particulars Section of the Processing Report for details. *FILE START TIME : UTC 2000/07/20 09:23:18.340 END TIME : UTC 2000/07/20 09:29:12.010 TIME INCREMENT : 0 0 0 0 40 ! (day hr min sec ms) TIME ZERO : UTC 1970/01/01 00:00:00.000 NUMBER OF RECORDS : 107 DATA DESCRIPTION : CTD FILE TYPE : ASCII NUMBER OF CHANNELS : 5 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- ---------------- -------------- -------------- 1 Pressure decibar 0.7 53.5 2 Temperature 'deg C (IPTS68)' -0.9882 7.7771 3 Transmissivity %/metre 38.5 58.7 4 Salinity PSS-78 30.45 32.58 5 Number_of_bin_records n/a 3 12 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ------ -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 6 F ' ' 1 4 -99 ' ' 7 F REAL*4 2 5 -99 ' ' 5 I I 0 $END $REMARKS File name : GLD-0043.ACQ $END *ADMINISTRATION MISSION : 2000-20 AGENCY : IOS, Ocean Science and Productivity, Sidney, B.C. COUNTRY : Canada PROJECT : ARCTIC 2000 SCIENTIST : van Hardenberg B. PLATFORM : Sir Wilfrid Laurier *LOCATION GEOGRAPHIC AREA : ARCTIC 2000 - Leg 1 STATION : BCS-6 EVENT NUMBER : 43 LATITUDE : 63 51.01000 N ! (deg min) LONGITUDE : 172 23.92000 W ! (deg min) LATITUDE 2 : 63 51.00000 N ! (deg min) LONGITUDE 2 : 172 23.92000 W ! (deg min) WATER DEPTH : 56 $REMARKS Station Latitude : 63 51.01 N Longitude : 172 23.92 W Depth : 56 $END *INSTRUMENT TYPE : Guildline Guildn CTD MODEL : Arctic SERIAL NUMBER : 43825 $REMARKS Acquisition program : CTD.EXE version 1.45 CTD data type : 2 ! 8755 system binary frame Control String : KP1000TC4 $END *RAW START TIME : UTC 2000/07/20 09:23:18.340 END TIME : UTC 2000/07/20 09:29:12.010 TIME INCREMENT : 0 0 0 0 40 ! (day hr min sec ms) NUMBER OF RECORDS : 8522 $TABLE: CHANNELS ! Averaging (day hr min sec ms) !Name Raw Units Interval Time Lag !-------------------- --------------- --------- ----------- Pressure Percent_FS Temperature 'DEG C (ITS68)' Conductivity_Ratio n/a Transmissivity Percent_FS $END *CALIBRATION $TABLE: RAW CHANNELS ! Name Units Fmla Pad Coefficients ! -------------------- --------------- ---- ------ ------------ Pressure dBars 10 -9.99 (-0.227331 999.4422) Temperature 'DEG C (ITS68)' 10 -9.99 (0.613305E-02 0.9995611) Conductivity_Ratio n/a 63 -9.99 (-0.871E-03 1.001) Transmissivity '%/25 cm' 10 -9.99 (115.66 -2.31422) $END $TABLE: CALCULATED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 130 -9.99 (Pressure Temperature Conductivity_Ratio) () $END $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Pressure dBars 10 -9.99 () (0.5 1) Salinity PSS-78 10 -9.99 () (-0.14E-01 1) Salinity PSS-78 10 -9.99 () (0.1E-01 1) $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- HDREDIT2 1.1 2001/01/16 11:10:07 ? ? ACQCONV 2.02 2001/01/16 17:39:46 8522 8522 CALIB 9.0 2001/01/31 17:38:25 8520 8520 ADTIMCH 2.01 2001/01/31 17:46:48 8520 8520 CLIP 1.2 2001/03/21 14:53:21 8520 3001 VIEW 5.02 2001/03/23 10:09:09 3001 3001 CLEAN 3.0.1 2001/03/24 15:10:44 3001 3001 TIMECOMP 4.0 2001/03/24 15:13:19 273848 3001 CLEAN 3.0.1 2001/03/24 15:17:47 3001 3001 CELLTM 1.2 2001/03/24 15:25:00 3001 3001 DERIVEDQ 2.5 2001/03/24 15:29:17 3001 3001 DELETE 5.0 2001/03/24 15:33:31 3001 605 CTDEDIT 4.41 2001/03/29 10:13:16 605 605 BINAVE 4.0.1 2001/04/10 09:44:06 605 107 CALIB 10.0 2001/04/10 09:44:20 107 107 HDREDIT2 1.1 2001/04/12 11:36:50 ? ? REORDER 1.1 2001/04/12 12:09:48 ? ? CALIB 11.2 2003/12/08 14:23:31 107 107 HDREDIT2 1.9 2004/02/27 14:42:31 ? ? CLEAN 4.5 2004/02/27 14:43:01 107 107 CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:21:42 107 107 $END $REMARKS -The following CALIB parameters were used: Calibration type = Raw Mode: UNION - calibration specs from Header and Cal File. Salinity is computed Transmissivity converted to %/metre Pressure offset = 0.0 Calibration file = Q:\CTD\2000\2020cal.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 1 Pressure dBars 10 -0.2273310E+00 0.9994422E+03 2 Temperature DEG C (IT 10 0.6133050E-02 0.9995611E+00 3 Conductivity_Ratio n/a 63 -0.8710000E-03 0.1001000E+01 4 Transmissivity %/25 cm 10 0.1156600E+03 -0.2314220E+01 Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 5 Salinity PSS-78 130 Pressure Temperature Conductivity_Ratio -The following ADTIMCH parameters were used. Add record number. -The following CLIP parameters were used. Clip by Record Number Limits First Record,Last Record = 3000, 6000 Time Not Available in File CLEAN functions: - Interpolation by Channel 2: Pressure -The following TIMECOMP parameters were used: Temp. probe Dist (m): 0.0000 Sample period (sec): 0.0400 CLEAN functions: - Reset #RECS, MIN & MAX values in header. - Interpolation by Channel 2: Pressure -The following CELLTM parameters were used. Value for alpha = 0.0800, Value for tau = 1.6000 -The following DERIVEQ parameters were used Reference channel for pressure is: Pressure Reference channel for temperature is: Temperature:cell Reference channel for conductivity ratio is: Conductivity_Ratio Reference channel for salinity is: Salinity Computed properties Derived Properties Ref Press Temp Type Replace ------------------ --------- --------- ------- Salinity Insitu Insitu YES -The following DELETE parameters were used: Surface Record Removal: Last Press Min Maximum Surface Pressure (relative): 20.00 Surface Swell Pressure Tolerance: 0.50 Pressure NOT filtered Swells deleted. Warning message if pressure difference of 2.00 Drop rates< 0.30m/s (calculated over 15 points) will be deleted Sample interval = 0.04 seconds. -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 0.5 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CALIB parameters were used: Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = Q:\CTD\2000\2000-22\Guildline\2022rcal.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 2 Pressure dBars 10 0.5000000E+00 0.1000000E+01 6 Salinity PSS-78 10 -0.1400000E-01 0.1000000E+01 -The following CALIB parameters were used: Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = Q:\Cruise_Data\2000-Arctic\2000-22-recal2.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 4 Salinity PSS-78 10 0.1000000E-01 0.1000000E+01 CLEAN functions: - Reset #RECS, MIN & MAX values in header. - Change Pad Value to -99 in All Channels. - Delete Empty Channels: 0 deleted. $END !--1--- ---2---- --3-- --4--- -5-- !Pressu Temperat Trans Salini Numb !re ure missi ty er_o ! vity ~bin ! _rec ! ords !------ -------- ----- ------ ---- *END OF HEADER 0.7 7.7771 54.1 30.45 3 1.0 7.7730 54.5 30.45 12 1.4 7.7585 54.2 30.47 8 2.0 7.7524 54.3 30.48 5 2.5 7.7449 54.2 30.48 6 3.0 7.7179 54.3 30.56 5 3.5 7.6030 54.1 30.76 5 4.0 7.3743 54.6 31.07 5 4.5 7.0199 55.8 31.29 5 5.0 6.9655 56.3 31.35 5 5.5 6.9685 55.8 31.38 6 6.0 6.8881 56.2 31.40 5 6.5 6.8680 56.2 31.41 5 7.0 6.9500 55.9 31.44 5 7.5 6.5194 56.2 31.54 7 8.1 5.8794 56.0 31.59 7 8.5 5.8435 55.8 31.59 4 9.0 5.6265 55.4 31.61 6 9.5 5.5096 55.2 31.62 4 10.0 5.3920 55.0 31.64 6 10.6 4.9203 54.7 31.71 7 11.0 4.1579 54.6 31.83 3 11.4 3.4020 55.6 31.93 6 12.0 3.2286 56.4 31.96 6 12.5 2.9378 56.5 31.99 6 13.0 2.3275 56.7 32.04 5 13.5 2.0431 57.0 32.07 5 14.0 1.8369 57.3 32.09 6 14.5 1.7543 57.5 32.10 5 15.0 1.7411 57.9 32.12 5 15.5 1.6514 57.9 32.13 5 16.0 1.5155 56.8 32.13 6 16.5 1.4617 56.9 32.14 3 17.0 1.3839 54.2 32.16 7 17.5 1.2741 55.3 32.18 5 18.0 1.0928 55.7 32.20 5 18.5 0.9375 57.6 32.22 4 19.0 0.8436 58.6 32.24 3 19.5 0.7067 58.7 32.26 7 20.0 0.4844 58.4 32.30 5 20.5 0.3837 56.5 32.32 4 21.0 0.2446 55.4 32.38 6 21.5 0.1869 54.4 32.41 6 22.0 0.0971 51.8 32.46 5 22.5 0.0525 50.6 32.49 6 23.0 0.0155 50.9 32.50 5 23.5 -0.0605 50.6 32.50 6 24.0 -0.1447 49.8 32.51 5 24.5 -0.2392 49.8 32.52 5 25.0 -0.3138 49.4 32.53 5 25.5 -0.3764 49.4 32.53 6 25.9 -0.4643 50.0 32.54 5 26.5 -0.5939 49.0 32.55 6 27.0 -0.7733 50.3 32.55 6 27.4 -0.8036 50.4 32.55 6 28.0 -0.8297 48.2 32.56 6 28.5 -0.8481 49.3 32.56 7 29.0 -0.8612 49.0 32.56 6 29.5 -0.8729 47.2 32.56 5 30.0 -0.8756 46.5 32.56 6 30.5 -0.8872 46.1 32.57 6 31.0 -0.9075 46.5 32.57 5 31.5 -0.9547 43.2 32.57 5 31.9 -0.9845 43.1 32.58 4 32.5 -0.9865 42.9 32.58 6 33.0 -0.9879 43.2 32.58 5 33.5 -0.9882 43.2 32.58 5 34.0 -0.9877 42.7 32.58 4 34.5 -0.9878 43.0 32.58 8 35.0 -0.9877 43.3 32.58 3 35.5 -0.9871 43.7 32.58 6 36.0 -0.9867 43.3 32.58 5 36.5 -0.9874 43.3 32.57 6 37.0 -0.9876 43.7 32.57 5 37.5 -0.9874 43.7 32.57 6 38.0 -0.9868 43.9 32.57 5 38.5 -0.9863 43.6 32.57 6 39.0 -0.9865 43.3 32.57 6 39.5 -0.9869 43.8 32.57 5 40.0 -0.9877 43.4 32.57 7 40.5 -0.9872 43.6 32.57 6 41.0 -0.9867 43.8 32.57 5 41.5 -0.9869 43.2 32.57 5 42.0 -0.9869 43.0 32.57 5 42.5 -0.9869 43.0 32.57 6 42.9 -0.9868 43.7 32.57 6 43.5 -0.9868 43.2 32.57 4 43.9 -0.9867 43.7 32.57 5 44.5 -0.9860 43.2 32.57 4 45.0 -0.9857 42.9 32.57 6 45.5 -0.9865 42.6 32.57 4 46.0 -0.9864 42.8 32.57 4 46.5 -0.9859 43.0 32.57 6 47.0 -0.9861 42.6 32.57 6 47.5 -0.9857 42.5 32.57 5 48.0 -0.9857 42.4 32.57 6 48.5 -0.9850 42.6 32.57 7 49.0 -0.9844 42.3 32.57 5 49.5 -0.9847 42.2 32.57 6 50.0 -0.9844 42.8 32.57 7 50.5 -0.9838 42.9 32.57 9 51.0 -0.9833 42.6 32.57 8 51.5 -0.9827 42.2 32.57 6 52.0 -0.9822 42.4 32.57 9 52.5 -0.9813 38.5 32.57 11 53.0 -0.9816 42.4 32.57 8 53.5 -0.9819 42.7 32.57 8