*2013/12/16 15:20:09.47 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : UTC 1999/10/08 13:06:18.000 TIME INCREMENT : 0 0 0 0.416667E-01 0 ! (day hr min sec ms) NUMBER OF RECORDS : 13 DATA DESCRIPTION : CTD FILE TYPE : ASCII DATA TYPE : REAL*4 NUMBER OF CHANNELS : 7 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- --------------------------- --------------- -------------- -------------- 1 Pressure decibar 1.5 12.8 2 Temperature:Secondary 'deg C (ITS90)' 9.7743 9.781 3 Transmissivity %/metre 38.8 41.2 4 Salinity:T1:C1 PSS-78 31.1579 31.1985 5 Number_of_bin_records n/a 1 63 6 Fluorescence:URU:Seatech mg/m^3 0.596 0.752 7 Fluorescence:URU:Seapoint mg/m^3 0.384 0.518 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 6 F ' ' 1 4 -99 ' ' 9 F ' ' 4 5 -99 ' ' 5 I I 0 6 -99 ' ' 8 F ' ' 3 7 -99 ' ' 8 F ' ' 3 $END $REMARKS This file converted from Sea-Bird file: W:\ctd\9935\derive\99350229.cnv Comments from secondary file: W:\CTD\9935\TEST\99350229.cor ----------------------------------------------------------- This file converted from Sea-Bird file: W:\CTD\9935\derive\99350229.cnv $END *ADMINISTRATION MISSION : 1999-35 AGENCY : IOS, Ocean Science and Productivity, Sidney, B.C. COUNTRY : Canada PROJECT : Laperouse, GLOBEC, CRD SCIENTIST : Thomson R.E. PLATFORM : John P. Tully *LOCATION GEOGRAPHIC AREA : West Coast Vancouver Island STATION : JFD0 EVENT NUMBER : 229 LATITUDE : 48 23.92000 N ! (deg min) LONGITUDE : 124 0.11000 W ! (deg min) WATER DEPTH : 15 *INSTRUMENT TYPE : Sea-Bird CTD MODEL : Sea Bird 911+ SERIAL NUMBER : 0506 $TABLE: SENSORS ! Name Abs Depth Serial No ! ----------------- -------------- ---------- temperature ' ' primary conductivity ' ' primary pressure ' ' 63507 temperature ' ' secondary conductivity ' ' secondary userpoly ' ' SeaTech userpoly ' ' SeaPoint transmissometer ' ' 192D $END $REMARKS SOFTWARE VERSION SEASAVE WIN32 V1.10 Comments from secondary file: W:\CTD\9935\TEST\99350229.cor ----------------------------------------------------------- SOFTWARE VERSION SEASAVE WIN32 V1.10 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- SBE_IOS 1.2 1999/11/09 13:07:22 3011 3011 DELETE 4.4 1999/11/09 15:09:07 3010 587 BINAVE 3.0 1999/11/10 17:34:54 587 13 CALIB 8.3 1999/11/15 14:10:45 13 13 REMOVECH 3.2 1999/11/16 10:03:10 13 13 MERGE 2.6.1 2001/07/31 10:44:48 13 13 REORDER 1.1 2001/07/31 11:06:53 ? ? HDREDIT2 1.1 2001/07/31 12:05:50 ? ? HDREDIT2 1.9 2004/01/15 14:53:26 ? ? CLEAN 4.5 2004/01/15 14:55:17 13 13 HDREDIT2 1.9 2004/01/16 10:17:30 ? ? HDREDIT2 2.0 2004/05/20 14:47:01 ? ? CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:20:09 13 13 $END $REMARKS -The following DELETE parameters were used: Surface Record Removal: Last Press Min Maximum Surface Pressure (relative): 20.00 Surface Swell Pressure Tolerance: 1.00 Pressure filtered over width: 15 Swells deleted. Warning message if pressure difference of 2.00 Drop rates< 0.30m/s (calculated over 15 points) will be deleted Sample interval = 0.04 seconds. -The following BINAVE parameters were used: Bin channel = pressure Averaging interval = 1.0 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CALIB parameters were used: Calibration type = Correct Pressure offset = 0.0 Calibration file = W:\ctd\9935\9935rcal.ccf -The following CHANNEL(S) were removed from file. Conductivity:Primary Conductivity:Secondary Temperature:Primary Salinity:t0:c0 Scan_Number flag -The following MERGE parameters were used: Merge Channel: Pressure Merge Scheme Used: Add Secondary to Primary Overlap Scheme Used: Keep Primary Primary Channels to Include: Temperature:Secondary, Transmissivity, Salinity:T1:C1, Number_of_bin_records Secondary Channels to Include: Fluorometer:0, Fluorometer:1 Primary file : W:\CTD\9935\TEST\99350229.ctd Secondary file: W:\CTD\9935\TEST\99350229.cor Comments from secondary file: W:\CTD\9935\TEST\99350229.cor ----------------------------------------------------------- -The following DELETE parameters were used: Surface Record Removal: Last Press Min Maximum Surface Pressure (relative): 20.00 Surface Swell Pressure Tolerance: 1.00 Pressure filtered over width: 15 Swells deleted. Warning message if pressure difference of 2.00 Drop rates< 0.30m/s (calculated over 15 points) will be deleted Sample interval = 0.04 seconds. -The following FILTER parameters were used. Median filter was used. Filter width = 11 The following channel(s) were filtered. Fluorometer:0 Fluorometer:1 -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 1.0 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CALIB parameters were used: Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = W:\CTD\9935\9935FL.CCF Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 8 Fluorometer:0 n/a 10 -0.1100000E+00 0.1339000E+01 9 Fluorometer:1 n/a 10 -0.5500000E-01 0.1000000E+01 CLEAN functions: $END *COMMENTS SBE HEADER Sea-Bird SBE 9 Raw Data File: FileName = C:\data\9935\99350229.dat Software Version Seasave Win32 v1.10 Temperature SN = 2023 Conductivity SN = 1729 Number of Bytes Per Scan = 24 Number of Voltage Words = 2 System UpLoad Time = Oct 08 1999 13:06:18 NMEA Latitude = 48 23.92 N NMEA Longitude = 124 00.11 W NMEA UTC (Time) = Oct 08 1999 13:06:18 Store Lat/Lon Data = Add to Header Only Ship: CCGS Tully Cruise: 9935 Station: JFD0 Depth: 15 # nquan = 12 # nvalues = 3011 # units = metric # name 0 = scan: scan number # name 1 = pr: pressure [db] # name 2 = t090: temperature, pri, ITS-90 [deg C] # name 3 = t190: temperature, sec, ITS-90 [deg C] # name 4 = c0S/m: conductivity, primary [S/m] # name 5 = c1S/m: conductivity, secondary [S/m] # name 6 = xmiss: transmissometer # name 7 = upoly0: userpoly 0 # name 8 = upoly1: userpoly 1 # name 9 = sal00: salinity, PSS-78 [PSU], T0, C0 # name 10 = sal11: salinity, PSS-78 [PSU], T1, C1 # name 11 = flag: 0.000e+00 # span 0 = 1, 3011 # span 1 = 1.048, 13.144 # span 2 = 9.7706, 9.7900 # span 3 = 9.7727, 9.7918 # span 4 = 3.408737, 3.413984 # span 5 = 3.411314, 3.416964 # span 6 = 77.97, 80.69 # span 7 = 0.46769, 0.75214 # span 8 = 0.09768, 2.46642 # span 9 = 31.1168, 31.1823 # span 10 = 31.1440, 31.2106 # span 11 = 0.000e+00, 0.000e+00 # interval = seconds: 0.0416667 # start_time = Oct 08 1999 13:06:18 # bad_flag = -9.990e-29 # sensor 0 = Frequency 0 temperature, primary, 2023, 11 Mar 99s # sensor 1 = Frequency 1 conductivity, primary, 1729, 23 Mar 99s, cpcor = -9.5 700e-08 # sensor 2 = Frequency 2 pressure, 63507, 01 Nov 96 # sensor 3 = Frequency 3 temperature, secondary, 2106, 05-May-99s # sensor 4 = Frequency 4 conductivity, secondary, 1764, 06-May-99s, cpcor = -9 .5700e-08 # sensor 5 = Extrnl Volt 0 userpoly 0, SeaTech, Sept 23,1999 # sensor 6 = Extrnl Volt 2 userpoly 1, SeaPoint, Sept 23, 1999 # sensor 7 = Extrnl Volt 3 transmissometer, 192D, 20-Jul-99 # datcnv_date = Nov 02 1999 17:33:32, 4.229 # datcnv_in = 99350229.DAT 9935CTD2.CON # datcnv_skipover = 0 # alignctd_date = Nov 04 1999 13:12:22, 4.229 # alignctd_in = 99350229.CNV # alignctd_cond_advSecs = -0.013, 0.060 # alignctd_temp_advSecs = 0.000, 0.000 # alignctd_oxygen_current_advSecs = 0.000, 0.000 # alignctd_oxygen_temp_advSecs = 0.000, 0.000 # alignctd_wetstar_advSecs = 0.000 # wildedit_date = Nov 04 1999 15:04:32, 4.229 # wildedit_in = 99350229.CNV # wildedit_pass1_nstd = 2.0 # wildedit_pass2_nstd = 5.0 # wildedit_npoint = 50 # wildedit_vars = pr t090 t190 c0S/m c1S/m xmiss # wildedit_excl_bad_scans = yes # celltm_date = Nov 04 1999 17:02:30, 4.229 # celltm_in = 99350229.CNV # celltm_alpha = 0.0300, 0.0300 # celltm_tau = 9.0000, 9.0000 # celltm_temp_sensor_use_for_cond = primary, secondary # derive_date = Nov 08 1999 12:55:16, 4.229 # derive_in = 99350229.CNV 9935CTD1.CON # file_type = ascii END* Comments from secondary file: W:\CTD\9935\TEST\99350229.cor ----------------------------------------------------------- SBE HEADER Sea-Bird SBE 9 Raw Data File: FileName = C:\data\9935\99350229.dat Software Version Seasave Win32 v1.10 Temperature SN = 2023 Conductivity SN = 1729 Number of Bytes Per Scan = 24 Number of Voltage Words = 2 System UpLoad Time = Oct 08 1999 13:06:18 NMEA Latitude = 48 23.92 N NMEA Longitude = 124 00.11 W NMEA UTC (Time) = Oct 08 1999 13:06:18 Store Lat/Lon Data = Add to Header Only Ship: CCGS Tully Cruise: 9935 Station: JFD0 Depth: 15 # nquan = 12 # nvalues = 3011 # units = metric # name 0 = scan: scan number # name 1 = pr: pressure [db] # name 2 = t090: temperature, pri, ITS-90 [deg C] # name 3 = t190: temperature, sec, ITS-90 [deg C] # name 4 = c0S/m: conductivity, primary [S/m] # name 5 = c1S/m: conductivity, secondary [S/m] # name 6 = xmiss: transmissometer # name 7 = upoly0: userpoly 0 # name 8 = upoly1: userpoly 1 # name 9 = sal00: salinity, PSS-78 [PSU], T0, C0 # name 10 = sal11: salinity, PSS-78 [PSU], T1, C1 # name 11 = flag: 0.000e+00 # span 0 = 1, 3011 # span 1 = 1.048, 13.144 # span 2 = 9.7706, 9.7900 # span 3 = 9.7727, 9.7918 # span 4 = 3.408737, 3.413984 # span 5 = 3.411314, 3.416964 # span 6 = 77.97, 80.69 # span 7 = 0.46769, 0.75214 # span 8 = 0.09768, 2.46642 # span 9 = 31.1168, 31.1823 # span 10 = 31.1440, 31.2106 # span 11 = 0.000e+00, 0.000e+00 # interval = seconds: 0.0416667 # start_time = Oct 08 1999 13:06:18 # bad_flag = -9.990e-29 # sensor 0 = Frequency 0 temperature, primary, 2023, 11 Mar 99s # sensor 1 = Frequency 1 conductivity, primary, 1729, 23 Mar 99s, cpcor = -9.5 700e-08 # sensor 2 = Frequency 2 pressure, 63507, 01 Nov 96 # sensor 3 = Frequency 3 temperature, secondary, 2106, 05-May-99s # sensor 4 = Frequency 4 conductivity, secondary, 1764, 06-May-99s, cpcor = -9 .5700e-08 # sensor 5 = Extrnl Volt 0 userpoly 0, SeaTech, Sept 23,1999 # sensor 6 = Extrnl Volt 2 userpoly 1, SeaPoint, Sept 23, 1999 # sensor 7 = Extrnl Volt 3 transmissometer, 192D, 20-Jul-99 # datcnv_date = Nov 02 1999 17:33:32, 4.229 # datcnv_in = 99350229.DAT 9935CTD2.CON # datcnv_skipover = 0 # alignctd_date = Nov 04 1999 13:12:22, 4.229 # alignctd_in = 99350229.CNV # alignctd_cond_advSecs = -0.013, 0.060 # alignctd_temp_advSecs = 0.000, 0.000 # alignctd_oxygen_current_advSecs = 0.000, 0.000 # alignctd_oxygen_temp_advSecs = 0.000, 0.000 # alignctd_wetstar_advSecs = 0.000 # wildedit_date = Nov 04 1999 15:04:32, 4.229 # wildedit_in = 99350229.CNV # wildedit_pass1_nstd = 2.0 # wildedit_pass2_nstd = 5.0 # wildedit_npoint = 50 # wildedit_vars = pr t090 t190 c0S/m c1S/m xmiss # wildedit_excl_bad_scans = yes # celltm_date = Nov 04 1999 17:02:30, 4.229 # celltm_in = 99350229.CNV # celltm_alpha = 0.0300, 0.0300 # celltm_tau = 9.0000, 9.0000 # celltm_temp_sensor_use_for_cond = primary, secondary # derive_date = Nov 08 1999 12:55:16, 4.229 # derive_in = 99350229.CNV 9935CTD1.CON # file_type = ascii *CALIBRATION $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------------- ----- ---- ------ ------------ Salinity:T1:C1 psu 10 -9.99 () (-0.5E-02 1) $END !--1--- ---2---- --3-- ---4---- -5-- ---6--- ---7--- !Pressu Temperat Trans Salinity Numb Fluores Fluores !re ure: missi :T1:C1 er_o cence: cence: ! Secondar vity ~bin URU: URU: ! y _rec Seatech Seapoin ! ords t !------ -------- ----- -------- ---- ------- ------- *END OF HEADER 1.5 9.7807 41.2 31.1579 1 0.688 0.384 2.1 9.7810 40.7 31.1603 50 0.684 0.422 3.1 9.7808 40.3 31.1622 31 0.708 0.488 3.9 9.7805 40.2 31.1646 52 0.596 0.476 5.1 9.7785 39.8 31.1756 45 0.610 0.518 6.0 9.7789 39.9 31.1748 58 0.600 0.438 7.0 9.7783 39.9 31.1774 57 0.608 0.435 8.0 9.7744 39.3 31.1960 49 0.644 0.405 9.0 9.7743 38.9 31.1974 45 0.597 0.447 10.0 9.7744 38.8 31.1985 56 0.661 0.494 11.0 9.7753 39.0 31.1938 63 0.624 0.500 12.0 9.7749 38.9 31.1963 46 0.752 0.399 12.8 9.7753 39.0 31.1944 34 0.713 0.451