*2013/12/16 15:20:08.83 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : UTC 1999/10/07 22:51:18.000 TIME INCREMENT : 0 0 0 0.416667E-01 0 ! (day hr min sec ms) NUMBER OF RECORDS : 26 DATA DESCRIPTION : CTD FILE TYPE : ASCII DATA TYPE : REAL*4 NUMBER OF CHANNELS : 7 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- --------------------------- --------------- -------------- -------------- 1 Pressure decibar 1.3 25.8 2 Temperature:Secondary 'deg C (ITS90)' 9.1666 10.0371 3 Transmissivity %/metre 40.5 51 4 Salinity:T1:C1 PSS-78 31.1937 31.9656 5 Number_of_bin_records n/a 12 58 6 Fluorescence:URU:Seatech mg/m^3 0.364 1.121 7 Fluorescence:URU:Seapoint mg/m^3 0.215 0.784 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 6 F ' ' 1 4 -99 ' ' 9 F ' ' 4 5 -99 ' ' 5 I I 0 6 -99 ' ' 8 F ' ' 3 7 -99 ' ' 8 F ' ' 3 $END $REMARKS This file converted from Sea-Bird file: W:\ctd\9935\derive\99350214.cnv Comments from secondary file: W:\CTD\9935\TEST\99350214.cor ----------------------------------------------------------- This file converted from Sea-Bird file: W:\CTD\9935\derive\99350214.cnv $END *ADMINISTRATION MISSION : 1999-35 AGENCY : IOS, Ocean Science and Productivity, Sidney, B.C. COUNTRY : Canada PROJECT : Laperouse, GLOBEC, CRD SCIENTIST : Thomson R.E. PLATFORM : John P. Tully *LOCATION GEOGRAPHIC AREA : West Coast Vancouver Island STATION : JFE1A EVENT NUMBER : 214 LATITUDE : 48 26.45000 N ! (deg min) LONGITUDE : 124 14.96000 W ! (deg min) WATER DEPTH : 28 *INSTRUMENT TYPE : Sea-Bird CTD MODEL : Sea Bird 911+ SERIAL NUMBER : 0506 $TABLE: SENSORS ! Name Abs Depth Serial No ! ----------------- -------------- ---------- temperature ' ' primary conductivity ' ' primary pressure ' ' 63507 temperature ' ' secondary conductivity ' ' secondary userpoly ' ' SeaTech userpoly ' ' SeaPoint transmissometer ' ' 192D $END $REMARKS SOFTWARE VERSION SEASAVE WIN32 V1.10 Comments from secondary file: W:\CTD\9935\TEST\99350214.cor ----------------------------------------------------------- $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- SBE_IOS 1.2 1999/11/09 12:48:00 5289 5289 DELETE 4.4 1999/11/09 15:06:06 5272 1003 BINAVE 3.0 1999/11/10 17:33:53 1003 26 CALIB 8.3 1999/11/15 14:09:49 26 26 REMOVECH 3.2 1999/11/16 10:02:31 26 26 MERGE 2.6.1 2001/07/31 10:44:37 26 26 REORDER 1.1 2001/07/31 11:06:50 ? ? HDREDIT2 1.1 2001/07/31 12:05:49 ? ? HDREDIT2 1.9 2004/01/15 14:53:25 ? ? CLEAN 4.5 2004/01/15 14:55:15 26 26 HDREDIT2 1.9 2004/01/16 10:16:48 ? ? HDREDIT2 2.0 2004/05/20 14:45:41 ? ? CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:20:08 26 26 $END $REMARKS -The following DELETE parameters were used: Surface Record Removal: Last Press Min Maximum Surface Pressure (relative): 20.00 Surface Swell Pressure Tolerance: 1.00 Pressure filtered over width: 15 Swells deleted. Warning message if pressure difference of 2.00 Drop rates< 0.30m/s (calculated over 15 points) will be deleted Sample interval = 0.04 seconds. -The following BINAVE parameters were used: Bin channel = pressure Averaging interval = 1.0 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CALIB parameters were used: Calibration type = Correct Pressure offset = 0.0 Calibration file = W:\ctd\9935\9935rcal.ccf -The following CHANNEL(S) were removed from file. Conductivity:Primary Conductivity:Secondary Temperature:Primary Salinity:t0:c0 Scan_Number flag -The following MERGE parameters were used: Merge Channel: Pressure Merge Scheme Used: Add Secondary to Primary Overlap Scheme Used: Keep Primary Primary Channels to Include: Temperature:Secondary, Transmissivity, Salinity:T1:C1, Number_of_bin_records Secondary Channels to Include: Fluorometer:0, Fluorometer:1 Primary file : W:\CTD\9935\TEST\99350214.ctd Secondary file: W:\CTD\9935\TEST\99350214.cor Comments from secondary file: W:\CTD\9935\TEST\99350214.cor ----------------------------------------------------------- -The following DELETE parameters were used: Surface Record Removal: Last Press Min Maximum Surface Pressure (relative): 20.00 Surface Swell Pressure Tolerance: 1.00 Pressure filtered over width: 15 Swells deleted. Warning message if pressure difference of 2.00 Drop rates< 0.30m/s (calculated over 15 points) will be deleted Sample interval = 0.04 seconds. -The following FILTER parameters were used. Median filter was used. Filter width = 11 The following channel(s) were filtered. Fluorometer:0 Fluorometer:1 -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 1.0 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CALIB parameters were used: Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = W:\CTD\9935\9935FL.CCF Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 8 Fluorometer:0 n/a 10 -0.1100000E+00 0.1339000E+01 9 Fluorometer:1 n/a 10 -0.5500000E-01 0.1000000E+01 CLEAN functions: $END *COMMENTS SBE HEADER Sea-Bird SBE 9 Raw Data File: FileName = C:\data\9935\99350214.dat Software Version Seasave Win32 v1.10 Temperature SN = 2023 Conductivity SN = 1729 Number of Bytes Per Scan = 24 Number of Voltage Words = 2 System UpLoad Time = Oct 07 1999 22:51:18 NMEA Latitude = 48 26.45 N NMEA Longitude = 124 14.96 W NMEA UTC (Time) = Oct 07 1999 22:51:18 Store Lat/Lon Data = Add to Header Only Ship: CCGS Tully Cruise: 9935 Station: JFE1A Depth: 28 DJS,DJA # nquan = 12 # nvalues = 5289 # units = metric # name 0 = scan: scan number # name 1 = pr: pressure [db] # name 2 = t090: temperature, pri, ITS-90 [deg C] # name 3 = t190: temperature, sec, ITS-90 [deg C] # name 4 = c0S/m: conductivity, primary [S/m] # name 5 = c1S/m: conductivity, secondary [S/m] # name 6 = xmiss: transmissometer # name 7 = upoly0: userpoly 0 # name 8 = upoly1: userpoly 1 # name 9 = sal00: salinity, PSS-78 [PSU], T0, C0 # name 10 = sal11: salinity, PSS-78 [PSU], T1, C1 # name 11 = flag: 0.000e+00 # span 0 = 1, 5289 # span 1 = 1.208, 26.115 # span 2 = 9.1578, 10.1251 # span 3 = 9.1627, 10.1265 # span 4 = 3.428597, 3.439986 # span 5 = 3.430901, 3.442978 # span 6 = 79.38, 84.72 # span 7 = 0.34188, 1.20889 # span 8 = 4.337e-17, 1.17216 # span 9 = 31.0297, 31.9494 # span 10 = 31.0501, 31.9756 # span 11 = 0.000e+00, 0.000e+00 # interval = seconds: 0.0416667 # start_time = Oct 07 1999 22:51:18 # bad_flag = -9.990e-29 # sensor 0 = Frequency 0 temperature, primary, 2023, 11 Mar 99s # sensor 1 = Frequency 1 conductivity, primary, 1729, 23 Mar 99s, cpcor = -9.5 700e-08 # sensor 2 = Frequency 2 pressure, 63507, 01 Nov 96 # sensor 3 = Frequency 3 temperature, secondary, 2106, 05-May-99s # sensor 4 = Frequency 4 conductivity, secondary, 1764, 06-May-99s, cpcor = -9 .5700e-08 # sensor 5 = Extrnl Volt 0 userpoly 0, SeaTech, Sept 23,1999 # sensor 6 = Extrnl Volt 2 userpoly 1, SeaPoint, Sept 23, 1999 # sensor 7 = Extrnl Volt 3 transmissometer, 192D, 20-Jul-99 # datcnv_date = Nov 02 1999 17:31:23, 4.229 # datcnv_in = 99350214.DAT 9935CTD2.CON # datcnv_skipover = 0 # alignctd_date = Nov 04 1999 13:02:33, 4.229 # alignctd_in = 99350214.CNV # alignctd_cond_advSecs = -0.013, 0.060 # alignctd_temp_advSecs = 0.000, 0.000 # alignctd_oxygen_current_advSecs = 0.000, 0.000 # alignctd_oxygen_temp_advSecs = 0.000, 0.000 # alignctd_wetstar_advSecs = 0.000 # wildedit_date = Nov 04 1999 15:02:54, 4.229 # wildedit_in = 99350214.CNV # wildedit_pass1_nstd = 2.0 # wildedit_pass2_nstd = 5.0 # wildedit_npoint = 50 # wildedit_vars = pr t090 t190 c0S/m c1S/m xmiss # wildedit_excl_bad_scans = yes # celltm_date = Nov 04 1999 17:00:46, 4.229 # celltm_in = 99350214.CNV # celltm_alpha = 0.0300, 0.0300 # celltm_tau = 9.0000, 9.0000 # celltm_temp_sensor_use_for_cond = primary, secondary # derive_date = Nov 08 1999 12:44:57, 4.229 # derive_in = 99350214.CNV 9935CTD1.CON # file_type = ascii END* Comments from secondary file: W:\CTD\9935\TEST\99350214.cor ----------------------------------------------------------- SBE HEADER Sea-Bird SBE 9 Raw Data File: FileName = C:\data\9935\99350214.dat Software Version Seasave Win32 v1.10 Temperature SN = 2023 Conductivity SN = 1729 Number of Bytes Per Scan = 24 Number of Voltage Words = 2 System UpLoad Time = Oct 07 1999 22:51:18 NMEA Latitude = 48 26.45 N NMEA Longitude = 124 14.96 W NMEA UTC (Time) = Oct 07 1999 22:51:18 Store Lat/Lon Data = Add to Header Only Ship: CCGS Tully Cruise: 9935 Station: JFE1A Depth: 28 DJS,DJA # nquan = 12 # nvalues = 5289 # units = metric # name 0 = scan: scan number # name 1 = pr: pressure [db] # name 2 = t090: temperature, pri, ITS-90 [deg C] # name 3 = t190: temperature, sec, ITS-90 [deg C] # name 4 = c0S/m: conductivity, primary [S/m] # name 5 = c1S/m: conductivity, secondary [S/m] # name 6 = xmiss: transmissometer # name 7 = upoly0: userpoly 0 # name 8 = upoly1: userpoly 1 # name 9 = sal00: salinity, PSS-78 [PSU], T0, C0 # name 10 = sal11: salinity, PSS-78 [PSU], T1, C1 # name 11 = flag: 0.000e+00 # span 0 = 1, 5289 # span 1 = 1.208, 26.115 # span 2 = 9.1578, 10.1251 # span 3 = 9.1627, 10.1265 # span 4 = 3.428597, 3.439986 # span 5 = 3.430901, 3.442978 # span 6 = 79.38, 84.72 # span 7 = 0.34188, 1.20889 # span 8 = 4.337e-17, 1.17216 # span 9 = 31.0297, 31.9494 # span 10 = 31.0501, 31.9756 # span 11 = 0.000e+00, 0.000e+00 # interval = seconds: 0.0416667 # start_time = Oct 07 1999 22:51:18 # bad_flag = -9.990e-29 # sensor 0 = Frequency 0 temperature, primary, 2023, 11 Mar 99s # sensor 1 = Frequency 1 conductivity, primary, 1729, 23 Mar 99s, cpcor = -9.5 700e-08 # sensor 2 = Frequency 2 pressure, 63507, 01 Nov 96 # sensor 3 = Frequency 3 temperature, secondary, 2106, 05-May-99s # sensor 4 = Frequency 4 conductivity, secondary, 1764, 06-May-99s, cpcor = -9 .5700e-08 # sensor 5 = Extrnl Volt 0 userpoly 0, SeaTech, Sept 23,1999 # sensor 6 = Extrnl Volt 2 userpoly 1, SeaPoint, Sept 23, 1999 # sensor 7 = Extrnl Volt 3 transmissometer, 192D, 20-Jul-99 # datcnv_date = Nov 02 1999 17:31:23, 4.229 # datcnv_in = 99350214.DAT 9935CTD2.CON # datcnv_skipover = 0 # alignctd_date = Nov 04 1999 13:02:33, 4.229 # alignctd_in = 99350214.CNV # alignctd_cond_advSecs = -0.013, 0.060 # alignctd_temp_advSecs = 0.000, 0.000 # alignctd_oxygen_current_advSecs = 0.000, 0.000 # alignctd_oxygen_temp_advSecs = 0.000, 0.000 # alignctd_wetstar_advSecs = 0.000 # wildedit_date = Nov 04 1999 15:02:54, 4.229 # wildedit_in = 99350214.CNV # wildedit_pass1_nstd = 2.0 # wildedit_pass2_nstd = 5.0 # wildedit_npoint = 50 # wildedit_vars = pr t090 t190 c0S/m c1S/m xmiss # wildedit_excl_bad_scans = yes # celltm_date = Nov 04 1999 17:00:46, 4.229 # celltm_in = 99350214.CNV # celltm_alpha = 0.0300, 0.0300 # celltm_tau = 9.0000, 9.0000 # celltm_temp_sensor_use_for_cond = primary, secondary # derive_date = Nov 08 1999 12:44:57, 4.229 # derive_in = 99350214.CNV 9935CTD1.CON *CALIBRATION $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------------- ----- ---- ------ ------------ Salinity:T1:C1 psu 10 -9.99 () (-0.5E-02 1) $END !--1--- ---2---- --3-- ---4---- -5-- ---6--- ---7--- !Pressu Temperat Trans Salinity Numb Fluores Fluores !re ure: missi :T1:C1 er_o cence: cence: ! Secondar vity ~bin URU: URU: ! y _rec Seatech Seapoin ! ords t !------ -------- ----- -------- ---- ------- ------- *END OF HEADER 1.3 10.0283 45.8 31.2096 12 -99.000 -99.000 2.1 10.0371 47.0 31.1937 58 1.054 0.784 3.0 10.0185 47.6 31.2240 44 1.048 0.760 4.0 10.0150 47.7 31.2290 44 1.121 0.718 5.0 10.0104 47.5 31.2387 38 1.007 0.737 5.9 10.0040 47.9 31.2477 42 0.983 0.746 7.0 9.9835 48.8 31.2670 37 0.969 0.661 8.0 9.9693 49.3 31.2774 27 0.987 0.626 9.0 9.9723 49.4 31.2756 30 1.020 0.647 10.0 9.9535 50.2 31.2816 52 0.916 0.698 11.0 9.9449 50.9 31.2857 58 0.869 0.635 12.0 9.9413 50.9 31.2890 36 0.905 0.568 13.0 9.9338 50.8 31.2967 26 0.933 0.536 14.0 9.9324 50.8 31.3004 32 0.825 0.542 14.9 9.9259 50.8 31.3051 35 0.801 0.587 15.9 9.9148 51.0 31.3103 33 0.742 0.456 17.0 9.9073 50.6 31.3192 25 0.692 0.442 18.0 9.8540 50.0 31.3589 33 0.735 0.439 19.0 9.7723 49.5 31.4361 49 0.600 0.469 20.0 9.6354 46.6 31.5764 43 0.582 0.429 21.0 9.5202 44.2 31.6832 39 0.482 0.362 22.0 9.3564 42.8 31.8129 43 0.420 0.343 23.0 9.2334 41.8 31.9095 51 0.407 0.358 24.0 9.2053 41.2 31.9314 42 0.379 0.296 25.0 9.1703 40.5 31.9604 35 0.364 0.215 25.8 9.1666 40.7 31.9656 33 0.391 0.282