*2013/12/16 15:20:07.74 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : UTC 1999/10/07 02:48:46.000 TIME INCREMENT : 0 0 0 0.416667E-01 0 ! (day hr min sec ms) NUMBER OF RECORDS : 19 DATA DESCRIPTION : CTD FILE TYPE : ASCII DATA TYPE : REAL*4 NUMBER OF CHANNELS : 7 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- --------------------------- --------------- -------------- -------------- 1 Pressure decibar 2.5 20.1 2 Temperature:Secondary 'deg C (ITS90)' 9.665 10.0758 3 Transmissivity %/metre 44.5 57.2 4 Salinity:T1:C1 PSS-78 31.1628 31.425 5 Number_of_bin_records n/a 1 58 6 Fluorescence:URU:Seatech mg/m^3 0.509 0.936 7 Fluorescence:URU:Seapoint mg/m^3 0.28 0.696 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 6 F ' ' 1 4 -99 ' ' 9 F ' ' 4 5 -99 ' ' 5 I I 0 6 -99 ' ' 8 F ' ' 3 7 -99 ' ' 8 F ' ' 3 $END $REMARKS This file converted from Sea-Bird file: W:\ctd\9935\derive\99350186.cnv Comments from secondary file: W:\CTD\9935\TEST\99350186.cor ----------------------------------------------------------- This file converted from Sea-Bird file: W:\CTD\9935\derive\99350186.cnv $END *ADMINISTRATION MISSION : 1999-35 AGENCY : IOS, Ocean Science and Productivity, Sidney, B.C. COUNTRY : Canada PROJECT : Laperouse, GLOBEC, CRD SCIENTIST : Thomson R.E. PLATFORM : John P. Tully *LOCATION GEOGRAPHIC AREA : West Coast Vancouver Island STATION : JFE2 EVENT NUMBER : 186 LATITUDE : 48 25.20000 N ! (deg min) LONGITUDE : 124 14.96000 W ! (deg min) WATER DEPTH : 136 *INSTRUMENT TYPE : Sea-Bird CTD MODEL : Sea Bird 911+ SERIAL NUMBER : 0506 $TABLE: SENSORS ! Name Abs Depth Serial No ! ----------------- -------------- ---------- temperature ' ' primary conductivity ' ' primary pressure ' ' 63507 temperature ' ' secondary conductivity ' ' secondary userpoly ' ' SeaTech userpoly ' ' SeaPoint transmissometer ' ' 192D $END $REMARKS SOFTWARE VERSION 4.236 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- SBE_IOS 1.2 1999/11/09 12:10:29 1702 1702 DELETE 4.4 1999/11/09 15:00:29 1691 726 BINAVE 3.0 1999/11/10 17:31:42 726 19 CALIB 8.3 1999/11/15 14:08:41 19 19 REMOVECH 3.2 1999/11/16 10:01:17 19 19 MERGE 2.6.1 2001/07/31 10:44:19 19 19 REORDER 1.1 2001/07/31 11:06:48 ? ? HDREDIT2 1.1 2001/07/31 12:05:47 ? ? HDREDIT2 1.9 2004/01/15 14:53:23 ? ? CLEAN 4.5 2004/01/15 14:55:12 19 19 HDREDIT2 1.9 2004/01/16 10:15:31 ? ? HDREDIT2 2.0 2004/05/20 14:43:46 ? ? CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:20:07 19 19 $END $REMARKS -The following DELETE parameters were used: Surface Record Removal: Last Press Min Maximum Surface Pressure (relative): 20.00 Surface Swell Pressure Tolerance: 1.00 Pressure filtered over width: 15 Swells deleted. Warning message if pressure difference of 2.00 Drop rates< 0.30m/s (calculated over 15 points) will be deleted Sample interval = 0.04 seconds. -The following BINAVE parameters were used: Bin channel = pressure Averaging interval = 1.0 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CALIB parameters were used: Calibration type = Correct Pressure offset = 0.0 Calibration file = W:\ctd\9935\9935rcal.ccf -The following CHANNEL(S) were removed from file. Conductivity:Primary Conductivity:Secondary Temperature:Primary Salinity:t0:c0 Scan_Number flag -The following MERGE parameters were used: Merge Channel: Pressure Merge Scheme Used: Add Secondary to Primary Overlap Scheme Used: Keep Primary Primary Channels to Include: Temperature:Secondary, Transmissivity, Salinity:T1:C1, Number_of_bin_records Secondary Channels to Include: Fluorometer:0, Fluorometer:1 Primary file : W:\CTD\9935\TEST\99350186.ctd Secondary file: W:\CTD\9935\TEST\99350186.cor Comments from secondary file: W:\CTD\9935\TEST\99350186.cor ----------------------------------------------------------- -The following DELETE parameters were used: Surface Record Removal: Last Press Min Maximum Surface Pressure (relative): 20.00 Surface Swell Pressure Tolerance: 1.00 Pressure filtered over width: 15 Swells deleted. Warning message if pressure difference of 2.00 Drop rates< 0.30m/s (calculated over 15 points) will be deleted Sample interval = 0.04 seconds. -The following FILTER parameters were used. Median filter was used. Filter width = 11 The following channel(s) were filtered. Fluorometer:0 Fluorometer:1 -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 1.0 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CALIB parameters were used: Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = W:\CTD\9935\9935FL.CCF CLEAN functions: $END *COMMENTS SBE HEADER Sea-Bird SBE 9 Raw Data File: FileName = C:\DATA\9935\99350186.DAT Software Version 4.236 Temperature SN = 2023 Conductivity SN = 1729 Number of Bytes Per Scan = 24 Number of Voltage Words = 2 System UpLoad Time = Oct 07 1999 02:48:46 NMEA Latitude = 48 25.20 N NMEA Longitude = 124 14.96 W NMEA UTC (Time) = Oct 07 1999 02:48:46 Store Lat/Lon Data = Add to Header Only Command Line = seasave ship: JOHN P TULLY Cruise: 9935 Station: JFE2 Latitude: Longitude: Depth: 136 CHECKING FOR SPIKES # nquan = 12 # nvalues = 1702 # units = metric # name 0 = scan: scan number # name 1 = pr: pressure [db] # name 2 = t090: temperature, pri, ITS-90 [deg C] # name 3 = t190: temperature, sec, ITS-90 [deg C] # name 4 = c0S/m: conductivity, primary [S/m] # name 5 = c1S/m: conductivity, secondary [S/m] # name 6 = xmiss: transmissometer # name 7 = upoly0: userpoly 0 # name 8 = upoly1: userpoly 1 # name 9 = sal00: salinity, PSS-78 [PSU], T0, C0 # name 10 = sal11: salinity, PSS-78 [PSU], T1, C1 # name 11 = flag: 0.000e+00 # span 0 = 1, 1702 # span 1 = 2.171, 20.522 # span 2 = 9.6371, 10.0815 # span 3 = 9.6424, 10.0873 # span 4 = 3.421091, 3.435675 # span 5 = 3.424260, 3.439217 # span 6 = 80.96, 87.10 # span 7 = 9.714e-18, 0.93265 # span 8 = 0.30525, 36.05617 # span 9 = 31.1288, 31.4129 # span 10 = 31.1626, 31.4425 # span 11 = 0.000e+00, 0.000e+00 # interval = seconds: 0.0416667 # start_time = Oct 07 1999 02:48:46 # bad_flag = -9.990e-29 # sensor 0 = Frequency 0 temperature, primary, 2023, 11 Mar 99s # sensor 1 = Frequency 1 conductivity, primary, 1729, 23 Mar 99s, cpcor = -9.5 700e-08 # sensor 2 = Frequency 2 pressure, 63507, 01 Nov 96 # sensor 3 = Frequency 3 temperature, secondary, 2106, 05-May-99s # sensor 4 = Frequency 4 conductivity, secondary, 1764, 06-May-99s, cpcor = -9 .5700e-08 # sensor 5 = Extrnl Volt 0 userpoly 0, SeaTech, Sept 23,1999 # sensor 6 = Extrnl Volt 2 userpoly 1, SeaPoint, Sept 23, 1999 # sensor 7 = Extrnl Volt 3 transmissometer, 192D, 20-Jul-99 # datcnv_date = Nov 02 1999 17:27:01, 4.229 # datcnv_in = 99350186.DAT 9935CTD2.CON # datcnv_skipover = 0 # alignctd_date = Nov 04 1999 12:45:28, 4.229 # alignctd_in = 99350186.CNV # alignctd_cond_advSecs = -0.013, 0.060 # alignctd_temp_advSecs = 0.000, 0.000 # alignctd_oxygen_current_advSecs = 0.000, 0.000 # alignctd_oxygen_temp_advSecs = 0.000, 0.000 # alignctd_wetstar_advSecs = 0.000 # wildedit_date = Nov 04 1999 14:59:58, 4.229 # wildedit_in = 99350186.CNV # wildedit_pass1_nstd = 2.0 # wildedit_pass2_nstd = 5.0 # wildedit_npoint = 50 # wildedit_vars = pr t090 t190 c0S/m c1S/m xmiss # wildedit_excl_bad_scans = yes # celltm_date = Nov 04 1999 16:57:25, 4.229 # celltm_in = 99350186.CNV # celltm_alpha = 0.0300, 0.0300 # celltm_tau = 9.0000, 9.0000 # celltm_temp_sensor_use_for_cond = primary, secondary # derive_date = Nov 08 1999 12:25:39, 4.229 # derive_in = 99350186.CNV 9935CTD1.CON # file_type = ascii END* Comments from secondary file: W:\CTD\9935\TEST\99350186.cor ----------------------------------------------------------- SBE HEADER Sea-Bird SBE 9 Raw Data File: FileName = C:\DATA\9935\99350186.DAT Software Version 4.236 Temperature SN = 2023 Conductivity SN = 1729 Number of Bytes Per Scan = 24 Number of Voltage Words = 2 System UpLoad Time = Oct 07 1999 02:48:46 NMEA Latitude = 48 25.20 N NMEA Longitude = 124 14.96 W NMEA UTC (Time) = Oct 07 1999 02:48:46 Store Lat/Lon Data = Add to Header Only Command Line = seasave ship: JOHN P TULLY Cruise: 9935 Station: JFE2 Latitude: Longitude: Depth: 136 CHECKING FOR SPIKES # nquan = 12 # nvalues = 1702 # units = metric # name 0 = scan: scan number # name 1 = pr: pressure [db] # name 2 = t090: temperature, pri, ITS-90 [deg C] # name 3 = t190: temperature, sec, ITS-90 [deg C] # name 4 = c0S/m: conductivity, primary [S/m] # name 5 = c1S/m: conductivity, secondary [S/m] # name 6 = xmiss: transmissometer # name 7 = upoly0: userpoly 0 # name 8 = upoly1: userpoly 1 # name 9 = sal00: salinity, PSS-78 [PSU], T0, C0 # name 10 = sal11: salinity, PSS-78 [PSU], T1, C1 # name 11 = flag: 0.000e+00 # span 0 = 1, 1702 # span 1 = 2.171, 20.522 # span 2 = 9.6371, 10.0815 # span 3 = 9.6424, 10.0873 # span 4 = 3.421091, 3.435675 # span 5 = 3.424260, 3.439217 # span 6 = 80.96, 87.10 # span 7 = 9.714e-18, 0.93265 # span 8 = 0.30525, 36.05617 # span 9 = 31.1288, 31.4129 # span 10 = 31.1626, 31.4425 # span 11 = 0.000e+00, 0.000e+00 # interval = seconds: 0.0416667 # start_time = Oct 07 1999 02:48:46 # bad_flag = -9.990e-29 # sensor 0 = Frequency 0 temperature, primary, 2023, 11 Mar 99s # sensor 1 = Frequency 1 conductivity, primary, 1729, 23 Mar 99s, cpcor = -9.5 700e-08 # sensor 2 = Frequency 2 pressure, 63507, 01 Nov 96 # sensor 3 = Frequency 3 temperature, secondary, 2106, 05-May-99s # sensor 4 = Frequency 4 conductivity, secondary, 1764, 06-May-99s, cpcor = -9 .5700e-08 # sensor 5 = Extrnl Volt 0 userpoly 0, SeaTech, Sept 23,1999 # sensor 6 = Extrnl Volt 2 userpoly 1, SeaPoint, Sept 23, 1999 # sensor 7 = Extrnl Volt 3 transmissometer, 192D, 20-Jul-99 # datcnv_date = Nov 02 1999 17:27:01, 4.229 # datcnv_in = 99350186.DAT 9935CTD2.CON # datcnv_skipover = 0 # alignctd_date = Nov 04 1999 12:45:28, 4.229 # alignctd_in = 99350186.CNV # alignctd_cond_advSecs = -0.013, 0.060 # alignctd_temp_advSecs = 0.000, 0.000 # alignctd_oxygen_current_advSecs = 0.000, 0.000 # alignctd_oxygen_temp_advSecs = 0.000, 0.000 # alignctd_wetstar_advSecs = 0.000 # wildedit_date = Nov 04 1999 14:59:58, 4.229 # wildedit_in = 99350186.CNV # wildedit_pass1_nstd = 2.0 # wildedit_pass2_nstd = 5.0 # wildedit_npoint = 50 # wildedit_vars = pr t090 t190 c0S/m c1S/m xmiss # wildedit_excl_bad_scans = yes # celltm_date = Nov 04 1999 16:57:25, 4.229 # celltm_in = 99350186.CNV # celltm_alpha = 0.0300, 0.0300 # celltm_tau = 9.0000, 9.0000 # celltm_temp_sensor_use_for_cond = primary, secondary # derive_date = Nov 08 1999 12:25:39, 4.229 # derive_in = 99350186.CNV 9935CTD1.CON *CALIBRATION $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------------- ----- ---- ------ ------------ Salinity:T1:C1 psu 10 -9.99 () (-0.5E-02 1) $END !--1--- ---2---- --3-- ---4---- -5-- ---6--- ---7--- !Pressu Temperat Trans Salinity Numb Fluores Fluores !re ure: missi :T1:C1 er_o cence: cence: ! Secondar vity ~bin URU: URU: ! y _rec Seatech Seapoin ! ords t !------ -------- ----- -------- ---- ------- ------- *END OF HEADER 2.5 10.0758 47.6 31.1628 1 0.692 0.696 3.4 10.0165 47.7 31.1632 21 0.926 0.598 3.9 10.0153 44.5 31.1639 58 0.876 0.610 4.9 9.9685 52.0 31.1718 41 0.775 0.597 6.0 9.9128 54.5 31.1898 39 0.843 0.639 7.0 9.8863 55.1 31.2014 45 0.936 0.655 8.0 9.8756 55.6 31.2055 46 0.819 0.575 9.0 9.8596 55.9 31.2134 46 0.665 0.542 10.0 9.8391 56.3 31.2245 39 0.564 0.413 11.0 9.8340 56.5 31.2275 45 0.562 0.476 12.0 9.8273 56.6 31.2315 37 0.551 0.439 13.0 9.8272 56.7 31.2322 42 0.559 0.411 14.0 9.8284 56.8 31.2371 31 0.539 0.368 15.0 9.8421 56.8 31.2510 37 0.538 0.380 16.0 9.8425 56.7 31.2798 40 0.530 0.403 17.0 9.8105 56.6 31.3093 36 0.566 0.340 18.0 9.7785 56.8 31.3280 42 0.509 0.457 19.0 9.7253 57.0 31.3753 30 0.554 0.280 20.1 9.6650 57.2 31.4250 46 0.529 0.321