*2013/12/16 15:20:06.09 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : UTC 1999/10/03 07:05:19.000 TIME INCREMENT : 0 0 0 0.416667E-01 0 ! (day hr min sec ms) NUMBER OF RECORDS : 22 DATA DESCRIPTION : CTD FILE TYPE : ASCII DATA TYPE : REAL*4 NUMBER OF CHANNELS : 7 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- --------------------------- --------------- -------------- -------------- 1 Pressure decibar 2 22.7 2 Temperature:Secondary 'deg C (ITS90)' 9.7678 9.8826 3 Transmissivity %/metre 48.9 54 4 Salinity:T1:C1 PSS-78 31.5158 31.6162 5 Number_of_bin_records n/a 22 69 6 Fluorescence:URU:Seatech mg/m^3 0.681 1.317 7 Fluorescence:URU:Seapoint mg/m^3 0.553 0.83 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 6 F ' ' 1 4 -99 ' ' 9 F ' ' 4 5 -99 ' ' 5 I I 0 6 -99 ' ' 8 F ' ' 3 7 -99 ' ' 8 F ' ' 3 $END $REMARKS This file converted from Sea-Bird file: W:\ctd\9935\derive\99350145.cnv Comments from secondary file: W:\CTD\9935\TEST\99350145.cor ----------------------------------------------------------- This file converted from Sea-Bird file: W:\CTD\9935\derive\99350145.cnv $END *ADMINISTRATION MISSION : 1999-35 AGENCY : IOS, Ocean Science and Productivity, Sidney, B.C. COUNTRY : Canada PROJECT : Laperouse, GLOBEC, CRD SCIENTIST : Thomson R.E. PLATFORM : John P. Tully *LOCATION GEOGRAPHIC AREA : West Coast Vancouver Island STATION : JFE1 EVENT NUMBER : 145 LATITUDE : 48 27.23000 N ! (deg min) LONGITUDE : 124 14.98000 W ! (deg min) WATER DEPTH : 28 *INSTRUMENT TYPE : Sea-Bird CTD MODEL : Sea Bird 911+ SERIAL NUMBER : 0506 $TABLE: SENSORS ! Name Abs Depth Serial No ! ----------------- -------------- ---------- temperature ' ' primary conductivity ' ' primary pressure ' ' 63507 temperature ' ' secondary conductivity ' ' secondary userpoly ' ' SeaTech userpoly ' ' SeaPoint transmissometer ' ' 192D $END $REMARKS SOFTWARE VERSION SEASAVE WIN32 V1.10 Comments from secondary file: W:\CTD\9935\TEST\99350145.cor ----------------------------------------------------------- SOFTWARE VERSION SEASAVE WIN32 V1.10 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- SBE_IOS 1.2 1999/11/09 11:03:34 4085 4085 DELETE 4.4 1999/11/09 14:49:54 4059 1138 BINAVE 3.0 1999/11/10 17:23:11 1138 22 CALIB 8.3 1999/11/15 13:54:51 22 22 REMOVECH 3.2 1999/11/16 09:58:31 22 22 MERGE 2.6.1 2001/07/31 10:43:51 22 22 REORDER 1.1 2001/07/31 11:06:45 ? ? HDREDIT2 1.1 2001/07/31 12:05:44 ? ? HDREDIT2 1.9 2004/01/15 14:53:19 ? ? CLEAN 4.5 2004/01/15 14:55:08 22 22 HDREDIT2 1.9 2004/01/16 10:13:42 ? ? HDREDIT2 2.0 2004/05/20 14:40:57 ? ? CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:20:06 22 22 $END $REMARKS -The following DELETE parameters were used: Surface Record Removal: Last Press Min Maximum Surface Pressure (relative): 20.00 Surface Swell Pressure Tolerance: 1.00 Pressure filtered over width: 15 Swells deleted. Warning message if pressure difference of 2.00 Drop rates< 0.30m/s (calculated over 15 points) will be deleted Sample interval = 0.04 seconds. -The following BINAVE parameters were used: Bin channel = pressure Averaging interval = 1.0 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CALIB parameters were used: Calibration type = Correct Pressure offset = 0.0 Calibration file = W:\ctd\9935\9935rcal.ccf -The following CHANNEL(S) were removed from file. Conductivity:Primary Conductivity:Secondary Temperature:Primary Salinity:t0:c0 Scan_Number flag -The following MERGE parameters were used: Merge Channel: Pressure Merge Scheme Used: Add Secondary to Primary Overlap Scheme Used: Keep Primary Primary Channels to Include: Temperature:Secondary, Transmissivity, Salinity:T1:C1, Number_of_bin_records Secondary Channels to Include: Fluorometer:0, Fluorometer:1 Primary file : W:\CTD\9935\TEST\99350145.ctd Secondary file: W:\CTD\9935\TEST\99350145.cor Comments from secondary file: W:\CTD\9935\TEST\99350145.cor ----------------------------------------------------------- -The following DELETE parameters were used: Surface Record Removal: Last Press Min Maximum Surface Pressure (relative): 20.00 Surface Swell Pressure Tolerance: 1.00 Pressure filtered over width: 15 Swells deleted. Warning message if pressure difference of 2.00 Drop rates< 0.30m/s (calculated over 15 points) will be deleted Sample interval = 0.04 seconds. -The following FILTER parameters were used. Median filter was used. Filter width = 11 The following channel(s) were filtered. Fluorometer:0 Fluorometer:1 -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 1.0 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CALIB parameters were used: Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = W:\CTD\9935\9935FL.CCF Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 8 Fluorometer:0 n/a 10 -0.1100000E+00 0.1339000E+01 9 Fluorometer:1 n/a 10 -0.5500000E-01 0.1000000E+01 CLEAN functions: $END *COMMENTS SBE HEADER Sea-Bird SBE 9 Raw Data File: FileName = C:\data\9935\99350145.dat Software Version Seasave Win32 v1.10 Temperature SN = 2023 Conductivity SN = 1729 Number of Bytes Per Scan = 24 Number of Voltage Words = 2 System UpLoad Time = Oct 03 1999 07:05:19 NMEA Latitude = 48 27.23 N NMEA Longitude = 124 14.98 W NMEA UTC (Time) = Oct 03 1999 07:05:19 Store Lat/Lon Data = Add to Header Only Ship: CCGS Tully Cruise: 9935 Station: JFE1 Depth: 28 # nquan = 12 # nvalues = 4085 # units = metric # name 0 = scan: scan number # name 1 = pr: pressure [db] # name 2 = t090: temperature, pri, ITS-90 [deg C] # name 3 = t190: temperature, sec, ITS-90 [deg C] # name 4 = c0S/m: conductivity, primary [S/m] # name 5 = c1S/m: conductivity, secondary [S/m] # name 6 = xmiss: transmissometer # name 7 = upoly0: userpoly 0 # name 8 = upoly1: userpoly 1 # name 9 = sal00: salinity, PSS-78 [PSU], T0, C0 # name 10 = sal11: salinity, PSS-78 [PSU], T1, C1 # name 11 = flag: 0.000e+00 # span 0 = 1, 4085 # span 1 = 1.529, 22.997 # span 2 = 9.7637, 9.8854 # span 3 = 9.7657, 9.8879 # span 4 = 3.453097, 3.456755 # span 5 = 3.455921, 3.459695 # span 6 = 83.39, 85.88 # span 7 = 0.51419, 1.76137 # span 8 = 0.47619, 2.73504 # span 9 = 31.4906, 31.5952 # span 10 = 31.5164, 31.6233 # span 11 = 0.000e+00, 0.000e+00 # interval = seconds: 0.0416667 # start_time = Oct 03 1999 07:05:19 # bad_flag = -9.990e-29 # sensor 0 = Frequency 0 temperature, primary, 2023, 11 Mar 99s # sensor 1 = Frequency 1 conductivity, primary, 1729, 23 Mar 99s, cpcor = -9.5 700e-08 # sensor 2 = Frequency 2 pressure, 63507, 01 Nov 96 # sensor 3 = Frequency 3 temperature, secondary, 2106, 05-May-99s # sensor 4 = Frequency 4 conductivity, secondary, 1764, 06-May-99s, cpcor = -9 .5700e-08 # sensor 5 = Extrnl Volt 0 userpoly 0, SeaTech, Sept 23,1999 # sensor 6 = Extrnl Volt 2 userpoly 1, SeaPoint, Sept 23, 1999 # sensor 7 = Extrnl Volt 3 transmissometer, 192D, 20-Jul-99 # datcnv_date = Nov 02 1999 17:19:54, 4.229 # datcnv_in = 99350145.DAT 9935CTD2.CON # datcnv_skipover = 0 # alignctd_date = Nov 04 1999 12:26:40, 4.229 # alignctd_in = 99350145.CNV # alignctd_cond_advSecs = -0.013, 0.060 # alignctd_temp_advSecs = 0.000, 0.000 # alignctd_oxygen_current_advSecs = 0.000, 0.000 # alignctd_oxygen_temp_advSecs = 0.000, 0.000 # alignctd_wetstar_advSecs = 0.000 # wildedit_date = Nov 04 1999 14:55:46, 4.229 # wildedit_in = 99350145.CNV # wildedit_pass1_nstd = 2.0 # wildedit_pass2_nstd = 5.0 # wildedit_npoint = 50 # wildedit_vars = pr t090 t190 c0S/m c1S/m xmiss # wildedit_excl_bad_scans = yes # celltm_date = Nov 04 1999 16:52:10, 4.229 # celltm_in = 99350145.CNV # celltm_alpha = 0.0300, 0.0300 # celltm_tau = 9.0000, 9.0000 # celltm_temp_sensor_use_for_cond = primary, secondary # derive_date = Nov 08 1999 11:58:19, 4.229 # derive_in = 99350145.CNV 9935CTD1.CON # file_type = ascii END* Comments from secondary file: W:\CTD\9935\TEST\99350145.cor ----------------------------------------------------------- SBE HEADER Sea-Bird SBE 9 Raw Data File: FileName = C:\data\9935\99350145.dat Software Version Seasave Win32 v1.10 Temperature SN = 2023 Conductivity SN = 1729 Number of Bytes Per Scan = 24 Number of Voltage Words = 2 System UpLoad Time = Oct 03 1999 07:05:19 NMEA Latitude = 48 27.23 N NMEA Longitude = 124 14.98 W NMEA UTC (Time) = Oct 03 1999 07:05:19 Store Lat/Lon Data = Add to Header Only Ship: CCGS Tully Cruise: 9935 Station: JFE1 Depth: 28 # nquan = 12 # nvalues = 4085 # units = metric # name 0 = scan: scan number # name 1 = pr: pressure [db] # name 2 = t090: temperature, pri, ITS-90 [deg C] # name 3 = t190: temperature, sec, ITS-90 [deg C] # name 4 = c0S/m: conductivity, primary [S/m] # name 5 = c1S/m: conductivity, secondary [S/m] # name 6 = xmiss: transmissometer # name 7 = upoly0: userpoly 0 # name 8 = upoly1: userpoly 1 # name 9 = sal00: salinity, PSS-78 [PSU], T0, C0 # name 10 = sal11: salinity, PSS-78 [PSU], T1, C1 # name 11 = flag: 0.000e+00 # span 0 = 1, 4085 # span 1 = 1.529, 22.997 # span 2 = 9.7637, 9.8854 # span 3 = 9.7657, 9.8879 # span 4 = 3.453097, 3.456755 # span 5 = 3.455921, 3.459695 # span 6 = 83.39, 85.88 # span 7 = 0.51419, 1.76137 # span 8 = 0.47619, 2.73504 # span 9 = 31.4906, 31.5952 # span 10 = 31.5164, 31.6233 # span 11 = 0.000e+00, 0.000e+00 # interval = seconds: 0.0416667 # start_time = Oct 03 1999 07:05:19 # bad_flag = -9.990e-29 # sensor 0 = Frequency 0 temperature, primary, 2023, 11 Mar 99s # sensor 1 = Frequency 1 conductivity, primary, 1729, 23 Mar 99s, cpcor = -9.5 700e-08 # sensor 2 = Frequency 2 pressure, 63507, 01 Nov 96 # sensor 3 = Frequency 3 temperature, secondary, 2106, 05-May-99s # sensor 4 = Frequency 4 conductivity, secondary, 1764, 06-May-99s, cpcor = -9 .5700e-08 # sensor 5 = Extrnl Volt 0 userpoly 0, SeaTech, Sept 23,1999 # sensor 6 = Extrnl Volt 2 userpoly 1, SeaPoint, Sept 23, 1999 # sensor 7 = Extrnl Volt 3 transmissometer, 192D, 20-Jul-99 # datcnv_date = Nov 02 1999 17:19:54, 4.229 # datcnv_in = 99350145.DAT 9935CTD2.CON # datcnv_skipover = 0 # alignctd_date = Nov 04 1999 12:26:40, 4.229 # alignctd_in = 99350145.CNV # alignctd_cond_advSecs = -0.013, 0.060 # alignctd_temp_advSecs = 0.000, 0.000 # alignctd_oxygen_current_advSecs = 0.000, 0.000 # alignctd_oxygen_temp_advSecs = 0.000, 0.000 # alignctd_wetstar_advSecs = 0.000 # wildedit_date = Nov 04 1999 14:55:46, 4.229 # wildedit_in = 99350145.CNV # wildedit_pass1_nstd = 2.0 # wildedit_pass2_nstd = 5.0 # wildedit_npoint = 50 # wildedit_vars = pr t090 t190 c0S/m c1S/m xmiss # wildedit_excl_bad_scans = yes # celltm_date = Nov 04 1999 16:52:10, 4.229 # celltm_in = 99350145.CNV # celltm_alpha = 0.0300, 0.0300 # celltm_tau = 9.0000, 9.0000 # celltm_temp_sensor_use_for_cond = primary, secondary # derive_date = Nov 08 1999 11:58:19, 4.229 # derive_in = 99350145.CNV 9935CTD1.CON # file_type = ascii *CALIBRATION $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------------- ----- ---- ------ ------------ Salinity:T1:C1 psu 10 -9.99 () (-0.5E-02 1) $END !--1--- ---2---- --3-- ---4---- -5-- ---6--- ---7--- !Pressu Temperat Trans Salinity Numb Fluores Fluores !re ure: missi :T1:C1 er_o cence: cence: ! Secondar vity ~bin URU: URU: ! y _rec Seatech Seapoin ! ords t !------ -------- ----- -------- ---- ------- ------- *END OF HEADER 2.0 9.8783 53.6 31.5159 52 1.047 0.624 2.8 9.8788 53.6 31.5160 37 0.985 0.689 4.0 9.8797 53.6 31.5162 55 0.842 0.635 5.2 9.8816 53.7 31.5159 30 0.759 0.598 5.8 9.8815 53.4 31.5158 35 0.740 0.553 6.9 9.8822 53.9 31.5160 49 0.705 0.663 8.2 9.8826 54.0 31.5172 47 0.715 0.684 9.0 9.8820 53.7 31.5197 67 0.687 0.774 9.8 9.8789 53.4 31.5277 40 0.747 0.712 11.0 9.8788 53.5 31.5284 66 0.681 0.713 12.0 9.8795 53.5 31.5269 60 1.015 0.724 13.0 9.8801 53.4 31.5279 59 1.245 0.667 14.0 9.8806 53.6 31.5262 54 0.890 0.734 15.0 9.8807 53.3 31.5300 56 0.713 0.733 16.0 9.8799 53.0 31.5362 49 0.794 0.710 17.0 9.8796 52.8 31.5378 46 0.898 0.682 18.0 9.8797 52.8 31.5383 64 0.865 0.830 19.0 9.8771 52.5 31.5418 60 1.042 0.747 19.9 9.8414 50.8 31.5679 60 1.090 0.830 21.0 9.7810 49.5 31.6076 48 0.999 0.750 22.0 9.7735 49.4 31.6123 69 1.317 0.722 22.7 9.7678 48.9 31.6162 22 1.304 0.754