*2013/12/16 15:19:15.85 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *COMMENTS Alt S start 19:27:46 10-14-1999 GPS not used. Alt S stop 19:31:57 10-14-1999 CTDEDIT was used to clean a bulge in salinity at the bottom of the halocline; th feature is unstable and appears to be instrumental in nature (32.2-35.9db). *FILE START TIME : UTC 1999/10/14 19:27:46.190 END TIME : UTC 1999/10/14 19:31:57.260 NUMBER OF RECORDS : 96 DATA DESCRIPTION : CTD FILE TYPE : ASCII NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- ---------------- -------------- -------------- 1 Pressure decibar 1.03 48.33 2 Temperature 'deg C (IPTS68)' 3.9946 5.3149 3 Salinity PSS-78 31.585 31.8151 4 Number_of_bin_records n/a 2 9 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ------ -------------- 1 -99 ' ' 8 F ' ' 2 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 9 F REAL*4 4 4 -99 ' ' 5 I I 0 $END $REMARKS File name : 99250046.ACQ $END *ADMINISTRATION MISSION : 1999-25 AGENCY : IOS, Ocean Science and Productivity, Sidney, B.C. COUNTRY : Canada PROJECT : Arctic99 SCIENTIST : van Hardenburg B. PLATFORM : Sir Wilfrid Laurier *LOCATION GEOGRAPHIC AREA : Arctic Archipelago STATION : BS8 EVENT NUMBER : 46 LATITUDE : 59 29.55000 N ! (deg min) LONGITUDE : 169 38.14000 W ! (deg min) LATITUDE 2 : 59 29.55000 N ! (deg min) LONGITUDE 2 : 169 38.14000 W ! (deg min) WATER DEPTH : 57 $REMARKS Station Latitude : 59 29.50 N Longitude : 169 38.00 W Depth : 55 $END *INSTRUMENT TYPE : Guildline Guildn CTD MODEL : Arctic SERIAL NUMBER : 43825 $REMARKS Acquisition program : CTD.EXE version 1.45 CTD data type : 2 ! 8755 system binary frame Control String : KP1000TC4 $END *RAW START TIME : UTC 1999/10/14 19:27:46.190 END TIME : UTC 1999/10/14 19:31:57.260 TIME INCREMENT : 0 0 0 0 40 ! (day hr min sec ms) NUMBER OF RECORDS : 6007 $TABLE: CHANNELS ! Averaging (day hr min sec ms) !Name Raw Units Interval Time Lag !-------------------- --------------- --------- ----------- Pressure Percent_FS Temperature 'DEG C (ITS68)' Conductivity_Ratio n/a Transmissivity Percent_FS $END *CALIBRATION $TABLE: RAW CHANNELS ! Name Units Fmla Pad Coefficients ! -------------------- --------------- ---- ------ ------------ Pressure dBars 10 -99 (-8.47 1007.609 -10.14 6.934) Temperature 'DEG C (ITS68)' 10 -99 (-0.23E-04 1.0004) Conductivity_Ratio n/a 63 -99 (-0.871E-03 1.001) Transmissivity '%/25 cm' 10 n/a (112.23 -2.24675) $END $TABLE: CALCULATED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 130 -99 (Pressure Temperature Conductivity_Ratio) () $END $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- ----- ---- ------ ------------ Pressure db 10 -99 () (0.5 1) Salinity psu 10 -99 () (-0.14E-01 1) $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- ACQCONV 2.02 2000/04/04 12:16:17 6007 6007 CALIB 8.4 2000/04/04 13:17:05 6007 6007 VIEW 5.02 2000/05/11 09:05:29 6007 6007 CLEAN 2.8.2 2000/05/11 10:36:51 6007 6007 DERIVEDQ 2.3 2000/05/11 10:42:25 6007 6007 TIMECOMP 3.1 2000/05/12 13:17:54 6007 6007 DELETE 4.4 2000/05/12 14:03:13 6007 575 BOXCAR 4.1 2000/05/16 16:49:09 575 575 CTDEDIT 4.16 2000/05/18 13:48:03 575 575 BINAVE 3.0 2000/05/19 17:07:40 575 96 CALIB 8.9 2000/05/19 17:08:45 96 96 REMOVECH 4.0 2000/05/19 17:10:46 96 96 REMOVECH 4.0 2000/05/26 09:26:58 96 96 HDREDIT2 1.9 2004/01/15 11:24:44 ? ? CLEAN 4.5 2004/01/15 11:25:31 96 96 CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:19:15 96 96 $END $REMARKS -The following CALIB parameters were used: Calibration type = Raw Salinity is computed Pressure offset = 0.0 Calibration file = M:\Data\9923\Gld\ios\9923cal.ccf Calibration file summary: 2000/04/04 13:12:46.68 Specifications for files ranging from *** to ***, using MODE: 'UNION'. Name Units Fmla Coefficents ------------------------- ------------- ---- ------------------------------ Pressure 10s -0.8470000E+01 0.1007609E+04 -0.1014000E+02 0.6934000E+01 Salinity 130 0.0000000E+00 0.0000000E+00 Pressure Temperature Conductivity_Ratio Temperature 10C -0.2300000E-04 0.1000400E+01 Conductivity_Ratio 63 -0.8710000E-03 0.1001000E+01 End of Calibration file summary: CLEAN functions: - Reset #RECS, MIN & MAX values in header. -The following DERIVEQ parameters were used Reference channel for pressure is: Pressure Reference channel for temperature is: Temperature Reference channel for conductivity ratio is: Conductivity_Ratio Reference channel for salinity is: Salinity Computed properties Derived Properties Ref Press Temp Type Replace ------------------ --------- --------- ------- Salinity Insitu Insitu YES -The following TIMECOMP parameters were used: Temp. probe Dist (m): 0.0000 Sample period (sec): 0.0400 -The following DELETE parameters were used: Surface Record Removal: Last Press Min Maximum Surface Pressure (relative): 20.00 Surface Swell Pressure Tolerance: 0.50 Pressure NOT filtered Swells deleted. Warning message if pressure difference of 2.00 Drop rates< 0.30m/s (calculated over 15 points) will be deleted Sample interval = 0.04 seconds. -The following FILTER parameters were used. Boxcar filter was used. Filter width = 21 The following channel(s) were filtered. Salinity -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 0.5 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CALIB parameters were used: Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Pressure offset = 0.0 Calibration file = W:\CTD\9925\9925rcal.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 1 Pressure db 10 0.5000000E+00 0.1000000E+01 5 Salinity psu 10 -0.1400000E-01 0.1000000E+01 -The following CHANNEL(S) were removed from file. Conductivity_Ratio -The following CHANNEL(S) were removed from file. Transmissivity CLEAN functions: - Reset #RECS, MIN & MAX values in header. - Change Pad Value to -99 in All Channels. $END !---1--- ---2---- ---3---- -4-- !Pressur Temperat Salinity Numb !e ure er_o ! ~bin ! _rec ! ords !------- -------- -------- ---- *END OF HEADER 1.03 5.3145 31.5860 6 1.51 5.3146 31.5863 7 2.04 5.3141 31.5860 6 2.56 5.3140 31.5855 6 3.04 5.3148 31.5850 9 3.55 5.3149 31.5851 6 3.98 5.3136 31.5850 4 4.48 5.3137 31.5853 8 4.99 5.3093 31.5856 4 5.53 5.3082 31.5861 6 6.01 5.3066 31.5867 8 6.48 5.3049 31.5872 8 6.98 5.3039 31.5871 8 7.46 5.3034 31.5868 5 7.97 5.3091 31.5866 5 8.47 5.3104 31.5866 6 8.99 5.3117 31.5866 6 9.51 5.3092 31.5869 5 9.99 5.3093 31.5871 7 10.45 5.3082 31.5872 6 10.93 5.3085 31.5876 4 11.51 5.3074 31.5879 7 12.02 5.3036 31.5882 5 12.50 5.3042 31.5887 8 13.02 5.3033 31.5885 8 13.49 5.3038 31.5884 6 14.03 5.3039 31.5883 5 14.50 5.3036 31.5883 7 15.05 5.3034 31.5889 5 15.55 5.2998 31.5894 6 16.04 5.2969 31.5900 6 16.55 5.2975 31.5905 5 17.02 5.2981 31.5907 7 17.53 5.2969 31.5908 7 17.95 5.2963 31.5911 6 18.49 5.2957 31.5910 6 19.02 5.2976 31.5908 7 19.52 5.2981 31.5908 4 19.98 5.2969 31.5910 7 20.52 5.2970 31.5908 6 21.01 5.2979 31.5905 4 21.47 5.3006 31.5899 7 21.99 5.2996 31.5897 5 22.45 5.2949 31.5915 9 22.96 5.2827 31.5932 7 23.43 5.2845 31.5937 5 23.97 5.2905 31.5930 7 24.52 5.2888 31.5926 5 25.02 5.2911 31.5931 6 25.51 5.2813 31.5942 5 25.98 5.2799 31.5966 6 26.52 5.2623 31.6025 5 27.02 5.2113 31.6099 6 27.49 5.1679 31.6234 7 28.04 5.1013 31.6382 5 28.52 4.9980 31.6611 7 29.01 4.7746 31.6903 6 29.54 4.6368 31.7104 4 30.01 4.5869 31.7279 6 30.51 4.5164 31.7477 6 31.02 4.3284 31.7675 5 31.50 4.1763 31.7862 6 32.05 4.1415 31.8024 6 32.50 4.1161 31.8101 4 32.94 4.0728 31.8109 4 33.49 4.0110 31.8108 7 34.00 4.0093 31.8106 6 34.45 4.0093 31.8105 5 34.99 4.0153 31.8103 7 35.49 4.0188 31.8102 5 35.96 4.0233 31.8100 6 36.45 4.0247 31.8098 6 36.98 4.0195 31.8101 7 37.39 4.0135 31.8111 6 37.93 4.0087 31.8124 7 38.49 4.0032 31.8134 6 39.01 4.0046 31.8137 7 39.45 4.0053 31.8134 6 39.93 4.0058 31.8134 5 40.46 4.0035 31.8136 6 40.98 3.9986 31.8140 6 41.50 3.9973 31.8144 5 41.97 3.9971 31.8146 6 42.53 3.9970 31.8147 6 43.03 3.9973 31.8149 5 43.54 3.9946 31.8151 7 44.00 3.9960 31.8148 7 44.55 3.9986 31.8146 6 45.02 3.9979 31.8143 7 45.51 3.9982 31.8143 8 45.99 3.9987 31.8141 5 46.52 3.9993 31.8138 7 47.09 4.0021 31.8132 5 47.46 4.0033 31.8130 4 47.99 4.0015 31.8127 6 48.33 3.9992 31.8144 2