*2013/12/16 15:19:13.08 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *COMMENTS Alt S start 13:39:34 09-26-1999 GPS not used. Alt S stop 13:45:48 09-26-1999 CTDEDIT was used to remove records from the surface to 0.5db and from 16db to 17.4db (the bottom of the cast). *FILE START TIME : UTC 1999/09/26 13:39:34.690 END TIME : UTC 1999/09/26 13:45:48.120 NUMBER OF RECORDS : 33 DATA DESCRIPTION : CTD FILE TYPE : ASCII NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- ---------------- -------------- -------------- 1 Pressure decibar 0.44 16.32 2 Temperature 'deg C (IPTS68)' 1.6579 1.6637 3 Salinity PSS-78 31.2384 31.2488 4 Number_of_bin_records n/a 2 15 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ------ -------------- 1 -99 ' ' 8 F ' ' 2 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 9 F REAL*4 4 4 -99 ' ' 5 I I 0 $END $REMARKS File name : 99250131.ACQ $END *ADMINISTRATION MISSION : 1999-25 AGENCY : IOS, Ocean Science and Productivity, Sidney, B.C. COUNTRY : Canada PROJECT : Archipelago SCIENTIST : van Hardenburg B. PLATFORM : Sir Wilfrid Laurier *LOCATION GEOGRAPHIC AREA : Arctic Archipelago STATION : BI1 EVENT NUMBER : 2 LATITUDE : 70 38.50000 N ! (deg min) LONGITUDE : 128 23.00000 W ! (deg min) LATITUDE 2 : 70 38.50000 N ! (deg min) LONGITUDE 2 : 128 23.00000 W ! (deg min) WATER DEPTH : 9999 $REMARKS Station Latitude : 70 38.50 N Longitude : 128 23.00 W Depth : 9999 $END *INSTRUMENT TYPE : Guildline Guildn CTD MODEL : Arctic SERIAL NUMBER : 43825 $REMARKS Acquisition program : CTD.EXE version 1.45 CTD data type : 2 ! 8755 system binary frame Control String : KP1000TC $END *RAW START TIME : UTC 1999/09/26 13:39:34.690 END TIME : UTC 1999/09/26 13:45:48.120 TIME INCREMENT : 0 0 0 0 40 ! (day hr min sec ms) NUMBER OF RECORDS : 8523 $TABLE: CHANNELS ! Averaging (day hr min sec ms) !Name Raw Units Interval Time Lag !-------------------- --------------- --------- ----------- Pressure Percent_FS Temperature 'DEG C (ITS68)' Conductivity_Ratio n/a $END *CALIBRATION $TABLE: RAW CHANNELS ! Name Units Fmla Pad Coefficients ! -------------------- --------------- ---- ------ ------------ Pressure dBars 10 -99 (-8.47 1007.609 -10.14 6.934) Temperature 'DEG C (ITS68)' 10 -99 (-0.23E-04 1.0004) Conductivity_Ratio n/a 63 -99 (-0.871E-03 1.001) $END $TABLE: CALCULATED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 130 -99 (Pressure Temperature Conductivity_Ratio) () $END $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- ----- ---- ------ ------------ Pressure db 10 -99 () (0.5 1) Salinity psu 10 -99 () (-0.14E-01 1) $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- ACQCONV 2.02 2000/04/04 12:02:24 8523 8523 CALIB 8.4 2000/04/04 13:12:54 8496 8496 VIEW 5.02 2000/05/08 15:43:48 8496 8496 CLEAN 2.8.2 2000/05/11 10:32:48 8496 8496 DERIVEDQ 2.3 2000/05/11 10:38:52 8496 8496 TIMECOMP 3.1 2000/05/12 13:15:36 8496 8496 DELETE 4.4 2000/05/12 14:07:07 8496 397 BOXCAR 4.1 2000/05/16 16:47:47 397 397 CTDEDIT 4.16 2000/05/17 15:12:15 397 350 BINAVE 3.0 2000/05/19 17:06:17 350 33 CALIB 8.9 2000/05/19 17:08:23 33 33 REMOVECH 4.0 2000/05/19 17:10:23 33 33 HDREDIT2 1.9 2004/01/15 11:24:37 ? ? CLEAN 4.5 2004/01/15 11:25:24 33 33 CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:19:13 33 33 $END $REMARKS -The following CALIB parameters were used: Calibration type = Raw Salinity is computed Pressure offset = 0.0 Calibration file = M:\Data\9923\Gld\ios\9923cal.ccf Calibration file summary: 2000/04/04 13:12:46.68 Specifications for files ranging from *** to ***, using MODE: 'UNION'. Name Units Fmla Coefficents ------------------------- ------------- ---- ------------------------------ Pressure 10s -0.8470000E+01 0.1007609E+04 -0.1014000E+02 0.6934000E+01 Salinity 130 0.0000000E+00 0.0000000E+00 Pressure Temperature Conductivity_Ratio Temperature 10C -0.2300000E-04 0.1000400E+01 Conductivity_Ratio 63 -0.8710000E-03 0.1001000E+01 End of Calibration file summary: CLEAN functions: - Reset #RECS, MIN & MAX values in header. -The following DERIVEQ parameters were used Reference channel for pressure is: Pressure Reference channel for temperature is: Temperature Reference channel for conductivity ratio is: Conductivity_Ratio Reference channel for salinity is: Salinity Computed properties Derived Properties Ref Press Temp Type Replace ------------------ --------- --------- ------- Salinity Insitu Insitu YES -The following TIMECOMP parameters were used: Temp. probe Dist (m): 0.0000 Sample period (sec): 0.0400 -The following DELETE parameters were used: Surface Record Removal: Last Press Min Maximum Surface Pressure (relative): 20.00 Surface Swell Pressure Tolerance: 0.50 Pressure NOT filtered Swells deleted. Warning message if pressure difference of 2.00 Drop rates< 0.30m/s (calculated over 15 points) will be deleted Sample interval = 0.04 seconds. -The following FILTER parameters were used. Boxcar filter was used. Filter width = 21 The following channel(s) were filtered. Salinity -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 0.5 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CALIB parameters were used: Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Pressure offset = 0.0 Calibration file = W:\CTD\9925\9925rcal.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 1 Pressure db 10 0.5000000E+00 0.1000000E+01 4 Salinity psu 10 -0.1400000E-01 0.1000000E+01 -The following CHANNEL(S) were removed from file. Conductivity_Ratio CLEAN functions: - Reset #RECS, MIN & MAX values in header. - Change Pad Value to -99 in All Channels. $END !---1--- ---2---- ---3---- -4-- !Pressur Temperat Salinity Numb !e ure er_o ! ~bin ! _rec ! ords !------- -------- -------- ---- *END OF HEADER 0.44 1.6600 31.2398 9 1.06 1.6592 31.2385 6 1.48 1.6591 31.2384 11 2.03 1.6600 31.2412 10 2.48 1.6594 31.2446 12 2.97 1.6593 31.2457 14 3.52 1.6600 31.2452 9 3.98 1.6598 31.2452 14 4.47 1.6616 31.2446 14 4.99 1.6598 31.2456 13 5.49 1.6595 31.2458 12 5.98 1.6612 31.2458 8 6.52 1.6609 31.2462 13 7.04 1.6596 31.2470 14 7.48 1.6597 31.2471 13 7.97 1.6600 31.2472 13 8.49 1.6602 31.2473 15 9.00 1.6613 31.2472 12 9.49 1.6604 31.2478 12 9.93 1.6605 31.2476 10 10.50 1.6613 31.2469 14 11.01 1.6629 31.2464 12 11.51 1.6633 31.2465 13 11.98 1.6618 31.2471 12 12.44 1.6616 31.2475 8 13.06 1.6581 31.2480 10 13.34 1.6579 31.2487 6 14.04 1.6605 31.2488 3 14.31 1.6623 31.2486 2 15.03 1.6625 31.2482 3 15.51 1.6637 31.2471 14 16.01 1.6635 31.2458 15 16.32 1.6633 31.2455 4