*2013/12/16 15:19:06.98 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : UTC 1999/07/26 14:20:55.000 END TIME : UTC 1999/07/26 14:21:11.000 TIME INCREMENT : 0 0 0 0.5 0 ! (day hr min sec ms) TIME ZERO : UTC 1970/01/01 00:00:00.000 NUMBER OF RECORDS : 8 DATA DESCRIPTION : CTD FILE TYPE : ASCII NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- --------------- -------------- -------------- 1 Pressure decibar 1 8 2 Temperature 'deg C (ITS90)' -1.504 1.4954 3 Salinity PSS-78 13.6464 31.8063 4 Number_of_bin_records n/a 2 8 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -9.9 ' ' 7 F ' ' 1 2 -9.9 ' ' 9 F ' ' 4 3 ' ' ' ' 9 F ' ' 4 4 ' ' ' ' 3 I I 0 $END $REMARKS This file converted from Sea-Bird file: C:\1999\9922-SBE\99220077.cnv $END *ADMINISTRATION MISSION : 1999-22 AGENCY : IOS, Ocean Physics Division, Sidney, B.C. COUNTRY : Canada PROJECT : Line P SCIENTIST : van Hardenberg B. PLATFORM : Sir Wilfrid Laurier *LOCATION GEOGRAPHIC AREA : N.Pacific, Bering & Chukchi STATION : UTN-10 EVENT NUMBER : 77 LATITUDE : 71 23.40000 N ! (deg min) LONGITUDE : 156 3.96000 W ! (deg min) WATER DEPTH : 12 *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-19 SERIAL NUMBER : 1030 $TABLE: SENSORS ! Name Abs Depth Serial No ! ---- -------------- ---------- ' ' ' ' ' ' $END $REMARKS SOFTWARE VERSION 4.234 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- SBE_IOS 2.0 2002/03/28 11:06:44 85145 85145 CLIP 1.2 2002/03/28 13:27:58 85145 646 REMOVECH 6.0 2002/03/28 14:23:29 646 646 CLIP 1.3 2006/01/13 11:18:24 519 353 REMOVECH 7.0 2006/01/16 11:55:53 353 353 FILTERS 4.3 2006/01/17 10:47:49 353 353 CALIB 11.7 2006/01/17 16:05:11 353 353 EXPFILT 1.1 2006/01/19 09:35:03 353 353 FILTERS 4.3 2006/01/19 09:39:41 353 353 DERIVEDQ 3.5 2006/01/19 11:54:03 353 353 SHIFTDAT 3.4 2006/01/19 12:22:06 353 353 CELLTM 1.3 2006/01/19 12:24:02 353 353 DELETE 6.3 2006/01/19 12:34:21 353 33 CALIB 11.7 2006/01/19 12:41:13 33 33 REMOVECH 7.0 2006/01/23 15:01:49 33 33 DERIVEDQ 3.5 2006/01/23 15:07:10 33 33 CLIP 1.3 2006/01/26 11:27:25 33 33 BINAVE 4.1 2006/01/26 13:47:53 33 9 CLIP 1.3 2006/01/30 09:37:41 9 8 REMOVECH 7.0 2006/01/30 09:54:31 8 8 HDREDIT2 2.5.1 2006/03/16 16:16:12 ? ? CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:19:06 8 8 $END $REMARKS -The following CLIP parameters were used. Clip by Record Number Limits First Record,Last Record = 84500, 85282 Time Calculated from Start and Interval: Get Start Time from Header Get Time Increment from Header -The following CHANNEL(S) were removed from file. Flag -The following CLIP parameters were used. Clip by Record Number Limits First Record,Last Record = 166, 518 Time Calculated from Start and Interval: Get Start Time from Header Get Time Increment from Header -REMOVECH 2006/01/16 11:55:53 The following CHANNEL(S) were removed: Scan_Number -The following FILTER parameters were used. Boxcar filter was used. Filter width = 5 The following channel(s) were filtered. Pressure -CALIB parameters: 2006/01/17 16:05:11 Calibration type = Raw Mode: ONLY - calibration specs from Cal File only. Calibration file = D:\9922\Cratio-mS-cm.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 3 Conductivity ratio 10 0.0000000E+00 0.2330240E-01 0.0000000E+00 0.0000000E+00 0.0000000E+00 -The following EXPFILT parameters were used: Channels to Filter: Conductivity Salinity will NOT be Recalculated after Filtering Sampling Interval: 0.500 Filter Time Response: 0.500 Calculated Filter Coeff a= 0.582 -The following FILTER parameters were used. Boxcar filter was used. Filter width = 3 The following channel(s) were filtered. Temperature -The following DERIVEQ parameters were used Reference channel for pressure is: Pressure Reference channel for temperature is: Temperature Reference channel for conductivity ratio is: Conductivity Reference channel for salinity is: Salinity Reference channel for oxygen is: Oxygen:Dissolved:SBE Computed properties Derived Properties Ref Press Temp Type Replace ------------------ --------- --------- ------- Salinity Insitu Insitu YES -The following SHIFT parameters were used. Shift Channel: Temperature # of Records to Advance (-ve for Delay): At REC# 0 Shift= 0.90 Salinity was recalculated after shift -The following CELLTM parameters were used. Value for alpha = 0.0180, Value for tau = 12.0000 Temperature channel: Temperature -The following DELETE parameters were used: Surface Record Removal: Off Pressure filtered over width: 5 Swells deleted. Warning message if pressure difference of 2.00 Drop rates < 0.30m/s (calculated over 5 points) will be deleted. Drop rate applies in the range 1.00 to 3.53 dbars Sample interval (from FILE section of header) = 0.500 seconds. -CALIB parameters: 2006/01/19 12:41:13 Calibration type = Correct Mode: UNION - calibration specs from Header and Cal File. Salinity is computed Calibration file = D:\9922\T-adj.CCF Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 2 Temperature C 10 0.1000000E-01 0.1000000E+01 Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 5 Salinity PSS-78 130 Pressure Temperature Conductivity -REMOVECH 2006/01/23 15:01:49 The following CHANNEL(S) were removed: Temperature [C] Descent_Rate [m/s] Salinity [PSS-78] -The following DERIVEQ parameters were used Reference channel for pressure is: Pressure Reference channel for temperature is: Temperature Reference channel for conductivity ratio is: Conductivity Reference channel for salinity is: Salinity Reference channel for oxygen is: Oxygen:Dissolved:SBE Computed properties Derived Properties Ref Press Temp Type Replace ------------------ --------- --------- ------- Salinity Insitu Insitu YES -The following CLIP parameters were used. Clip by Channel Range Clip Channel: Pressure Min,Max = 0.000, 4000.000 Time Calculated from Start and Interval: Get Start Time from Header Get Time Increment from Header -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 1.00 Minimum bin value = 0.000 Bin value was used Interpolated values were used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CLIP parameters were used. Clip by Channel Range Clip Channel: Pressure Min,Max = 1.000, 2000.000 Time Not Available in File -REMOVECH 2006/01/30 09:54:31 The following CHANNEL(S) were removed: Conductivity [ratio] -HEADER EDITS: 2006/03/16 16:16:12 Applied edit header: O:\Data Processing\Header Comments\Work\1999-22-CTD.TXT Channel 1: Pressure [dbar] Format: F13.3 ==> F7.1 Channel 2: Temperature [DEG C (ITS90)] Units: deg C (ITS90) ==> DEG C (ITS90) Format: F13.4 ==> F9.4 Channel 3: Salinity [PSS-78] Format: F13.4 ==> F9.4 Channel 4: Number_of_bin_records [n/a] Format: I13 ==> I3 $END *COMMENTS SBE HEADER Sea-Bird SBE 19 Data File: FileName = \9922-SBE\utn10.HEX Software Version 4.234 Temperature SN = 1030 Conductivity SN = 1030 System UpLoad Time = Jul 26 1999 07:27:16 Ship: LAURIER Cruise: 9922 Station: UTN-10 Latitude: 71 23.4 N Longitude: 156 03.96 W Depth: 12 m ds SEACAT PROFILER V3.1b SN 1030 07/26/99 14:28:47.736 strain gauge pressure sensor: S/N = 189759, range = 5000 psia, tc = -221 clk = 32768.063 iop = 138 vmain = 10.2 vlith = 5.7 mode = PROFILE ncasts = 1 sample rate = 1 scan every 0.5 seconds minimum raw conductivity frequency for pump turn on = 2500 hertz pump delay = 40 seconds samples = 85145 free = 1602 lwait = 0 msec SW1 = 88 battery cutoff = 7.3 volts number of voltages sampled = 0 logdata = NO S> cast 0 07/26 02:35:23 samples 0 to 85144 sample rate = 1 scan every 0.5 se conds stop = switch off # nquan = 6 # nvalues = 85145 # units = specified # name 0 = scan: Scan Count # name 1 = prSM: Pressure, Strain Gauge [db] # name 2 = t090C: Temperature [ITS-90, deg C] # name 3 = c0mS/cm: Conductivity [mS/cm] # name 4 = dz/dtM: Descent Rate [m/s] # name 5 = flag: 0.000e+00 # span 0 = 1, 85145 # span 1 = -10.430, 7.115 # span 2 = -1.6029, 17.4895 # span 3 = 0.049938, 25.467152 # span 4 = -0.630, 0.900 # span 5 = 0.0000e+00, 0.0000e+00 # interval = seconds: 0.5 # start_time = Jul 26 1999 02:35:23 # bad_flag = -9.990e-29 # sensor 0 = Frequency 0 temperature, 1030, 28Aug98 # sensor 1 = Frequency 1 conductivity, 1030, 28Aug98, cpcor = -9.5700e-08 # sensor 2 = Pressure Voltage, 189759, 26Aug98 # datcnv_date = Feb 18 2002 09:42:38, 5.2 # datcnv_in = D:\Data\9922-SBE\HeX\99220077.hex D:\Data\9922-SBE\HeX\1030-98A.CO N # datcnv_skipover = 0 # file_type = ascii END* *CALIBRATION $TABLE: RAW CHANNELS ! Name Units Fmla Pad Coefficients ! -------------- ------- ---- ------ ------------ Conductivity ratio 10 -99 (0 0.233024E-01 0 0 0) $END $TABLE: CALCULATED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 130 -99 (Pressure Temperature Conductivity) () $END $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ------------- ----- ---- ------ ------------ Temperature C 10 -99 () (0.1E-01 1) $END !--1--- ---2---- ---3---- 4- !Pressu Temperat Salinity Nu !re ure mb ! ~c ! or ! ds !------ -------- -------- -- *END OF HEADER 1.0 1.4954 13.6464 5 2.0 1.4634 13.7524 2 3.0 1.3184 14.0422 3 4.0 0.5629 19.8842 3 5.0 0.0399 22.4517 3 6.0 -0.9438 28.6634 3 7.0 -1.4159 31.2663 3 8.0 -1.5040 31.8063 8