*2013/12/16 15:19:06.79 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : UTC 1999/07/19 17:43:04.500 END TIME : UTC 1999/07/19 17:43:59.500 TIME INCREMENT : 0 0 0 0.5 0 ! (day hr min sec ms) NUMBER OF RECORDS : 46 DATA DESCRIPTION : CTD FILE TYPE : ASCII NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- --------------- -------------- -------------- 1 Pressure decibar 1 46 2 Temperature 'deg C (ITS90)' 1.9242 2.3532 3 Salinity PSS-78 31.6451 32.7521 4 Number_of_bin_records n/a 1 7 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -9.9 ' ' 7 F ' ' 1 2 -9.9 ' ' 9 F ' ' 4 3 ' ' ' ' 9 F ' ' 4 4 ' ' ' ' 3 I I 0 $END $REMARKS This file converted from Sea-Bird file: D:\Data\9922-SBE\Process\99220069.cnv $END *ADMINISTRATION MISSION : 1999-22 AGENCY : IOS, Ocean Physics Division, Sidney, B.C. COUNTRY : Canada PROJECT : Line P SCIENTIST : van Hardenberg B. PLATFORM : Sir Wilfrid Laurier *LOCATION GEOGRAPHIC AREA : Gulf of Alaska & Bering Sea STATION : UTN-3 EVENT NUMBER : 69 LATITUDE : 67 20.00000 N ! (deg min) LONGITUDE : 168 59.90000 W ! (deg min) WATER DEPTH : 47 *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-19 SERIAL NUMBER : 1030 $TABLE: SENSORS ! Name Abs Depth Serial No ! ---- -------------- ---------- ' ' ' ' ' ' $END $REMARKS SOFTWARE VERSION 4.234 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- SBE_IOS 2.0 2002/02/18 13:28:50 498 498 REMOVECH 6.0 2002/02/18 19:33:06 498 498 CLIP 1.3 2006/01/13 09:48:05 335 207 REMOVECH 7.0 2006/01/16 11:55:52 207 207 FILTERS 4.3 2006/01/17 10:47:49 207 207 CALIB 11.7 2006/01/17 16:05:10 207 207 EXPFILT 1.1 2006/01/19 09:35:03 207 207 FILTERS 4.3 2006/01/19 09:39:40 207 207 DERIVEDQ 3.5 2006/01/19 11:54:03 207 207 SHIFTDAT 3.4 2006/01/19 12:22:06 207 207 CELLTM 1.3 2006/01/19 12:24:01 207 207 DELETE 6.3 2006/01/19 12:34:20 207 111 CALIB 11.7 2006/01/19 12:41:13 111 111 REMOVECH 7.0 2006/01/23 15:01:48 111 111 DERIVEDQ 3.5 2006/01/23 15:07:10 111 111 CLIP 1.3 2006/01/26 11:27:25 111 111 BINAVE 4.1 2006/01/26 13:47:53 111 47 CLIP 1.3 2006/01/30 09:37:40 47 46 REMOVECH 7.0 2006/01/30 09:54:31 46 46 HDREDIT2 2.5.1 2006/03/16 16:16:12 ? ? CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:19:06 46 46 $END $REMARKS -The following CHANNEL(S) were removed from file. Flag -The following CLIP parameters were used. Clip by Record Number Limits First Record,Last Record = 128, 334 Time Calculated from Start and Interval: Get Start Time from Header Get Time Increment from Header -REMOVECH 2006/01/16 11:55:52 The following CHANNEL(S) were removed: Scan_Number -The following FILTER parameters were used. Boxcar filter was used. Filter width = 5 The following channel(s) were filtered. Pressure -CALIB parameters: 2006/01/17 16:05:10 Calibration type = Raw Mode: ONLY - calibration specs from Cal File only. Calibration file = D:\9922\Cratio-mS-cm.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 3 Conductivity ratio 10 0.0000000E+00 0.2330240E-01 0.0000000E+00 0.0000000E+00 0.0000000E+00 -The following EXPFILT parameters were used: Channels to Filter: Conductivity Salinity will NOT be Recalculated after Filtering Sampling Interval: 0.500 Filter Time Response: 0.500 Calculated Filter Coeff a= 0.582 -The following FILTER parameters were used. Boxcar filter was used. Filter width = 3 The following channel(s) were filtered. Temperature -The following DERIVEQ parameters were used Reference channel for pressure is: Pressure Reference channel for temperature is: Temperature Reference channel for conductivity ratio is: Conductivity Reference channel for salinity is: Salinity Reference channel for oxygen is: Oxygen:Dissolved:SBE Computed properties Derived Properties Ref Press Temp Type Replace ------------------ --------- --------- ------- Salinity Insitu Insitu YES -The following SHIFT parameters were used. Shift Channel: Temperature # of Records to Advance (-ve for Delay): At REC# 0 Shift= 0.90 Salinity was recalculated after shift -The following CELLTM parameters were used. Value for alpha = 0.0180, Value for tau = 12.0000 Temperature channel: Temperature -The following DELETE parameters were used: Surface Record Removal: Off Pressure filtered over width: 5 Swells deleted. Warning message if pressure difference of 2.00 Drop rates < 0.30m/s (calculated over 5 points) will be deleted. Drop rate applies in the range 1.00 to 41.24 dbars Sample interval (from FILE section of header) = 0.500 seconds. -CALIB parameters: 2006/01/19 12:41:13 Calibration type = Correct Mode: UNION - calibration specs from Header and Cal File. Salinity is computed Calibration file = D:\9922\T-adj.CCF Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 2 Temperature C 10 0.1000000E-01 0.1000000E+01 Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 5 Salinity PSS-78 130 Pressure Temperature Conductivity -REMOVECH 2006/01/23 15:01:48 The following CHANNEL(S) were removed: Temperature [C] Descent_Rate [m/s] Salinity [PSS-78] -The following DERIVEQ parameters were used Reference channel for pressure is: Pressure Reference channel for temperature is: Temperature Reference channel for conductivity ratio is: Conductivity Reference channel for salinity is: Salinity Reference channel for oxygen is: Oxygen:Dissolved:SBE Computed properties Derived Properties Ref Press Temp Type Replace ------------------ --------- --------- ------- Salinity Insitu Insitu YES -The following CLIP parameters were used. Clip by Channel Range Clip Channel: Pressure Min,Max = 0.000, 4000.000 Time Calculated from Start and Interval: Get Start Time from Header Get Time Increment from Header -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 1.00 Minimum bin value = 0.000 Bin value was used Interpolated values were used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CLIP parameters were used. Clip by Channel Range Clip Channel: Pressure Min,Max = 1.000, 2000.000 Time Not Available in File -REMOVECH 2006/01/30 09:54:31 The following CHANNEL(S) were removed: Conductivity [ratio] -HEADER EDITS: 2006/03/16 16:16:12 Applied edit header: O:\Data Processing\Header Comments\Work\1999-22-CTD.TXT Channel 1: Pressure [dbar] Units: DBAR ==> dbar Format: F13.3 ==> F7.1 Channel 2: Temperature [DEG C (ITS90)] Format: F13.4 ==> F9.4 Channel 3: Salinity [PSS-78] Format: F13.4 ==> F9.4 Channel 4: Number_of_bin_records [n/a] Format: I13 ==> I3 $END *COMMENTS SBE HEADER Sea-Bird SBE 19 Data File: FileName = \9922-SBE\utn-3.HEX Software Version 4.234 Temperature SN = 1030 Conductivity SN = 1030 System UpLoad Time = Jul 19 1999 11:42:04 Ship: LAURIER Cruise: 9922 Station: UTN-3 Latitude: 67 20.0N Longitude: 168 59.9W remarks: depth= ds SEACAT PROFILER V3.1b SN 1030 07/19/99 18:43:21.176 strain gauge pressure sensor: S/N = 189759, range = 5000 psia, tc = -221 clk = 32768.109 iop = 141 vmain = 11.8 vlith = 5.6 mode = PROFILE ncasts = 1 sample rate = 1 scan every 0.5 seconds minimum raw conductivity frequency for pump turn on = 2500 hertz pump delay = 40 seconds samples = 498 free = 86249 lwait = 0 msec SW1 = 88 battery cutoff = 7.3 volts number of voltages sampled = 0 logdata = NO S> cast 0 07/19 17:42:01 samples 0 to 497 sample rate = 1 scan every 0.5 seco nds stop = switch off # nquan = 6 # nvalues = 498 # units = specified # name 0 = scan: Scan Count # name 1 = prSM: Pressure, Strain Gauge [db] # name 2 = t090C: Temperature [ITS-90, deg C] # name 3 = c0mS/cm: Conductivity [mS/cm] # name 4 = dz/dtM: Descent Rate [m/s] # name 5 = flag: 0.000e+00 # span 0 = 1, 498 # span 1 = -9.980, 44.455 # span 2 = 1.9223, 6.5167 # span 3 = 0.244281, 29.934048 # span 4 = -1.260, 1.350 # span 5 = 0.0000e+00, 0.0000e+00 # interval = seconds: 0.5 # start_time = Jul 19 1999 17:42:01 # bad_flag = -9.990e-29 # sensor 0 = Frequency 0 temperature, 1030, 28Aug98 # sensor 1 = Frequency 1 conductivity, 1030, 28Aug98, cpcor = -9.5700e-08 # sensor 2 = Pressure Voltage, 189759, 26Aug98 # datcnv_date = Feb 18 2002 09:42:37, 5.2 # datcnv_in = D:\Data\9922-SBE\HeX\99220069.HEX D:\Data\9922-SBE\HeX\1030-98A.CO N # datcnv_skipover = 0 # file_type = ascii END* *CALIBRATION $TABLE: RAW CHANNELS ! Name Units Fmla Pad Coefficients ! -------------- ------- ---- ------ ------------ Conductivity ratio 10 -99 (0 0.233024E-01 0 0 0) $END $TABLE: CALCULATED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 130 -99 (Pressure Temperature Conductivity) () $END $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ------------- ----- ---- ------ ------------ Temperature C 10 -99 () (0.1E-01 1) $END !--1--- ---2---- ---3---- 4- !Pressu Temperat Salinity Nu !re ure mb ! ~c ! or ! ds !------ -------- -------- -- *END OF HEADER 1.0 2.3532 31.6451 6 2.0 1.9858 32.7157 2 3.0 1.9866 32.7238 3 4.0 1.9840 32.7276 3 5.0 1.9788 32.7261 2 6.0 1.9825 32.7248 2 7.0 1.9834 32.7205 2 8.0 1.9800 32.7196 2 9.0 1.9769 32.7195 2 10.0 1.9737 32.7197 2 11.0 1.9663 32.7188 2 12.0 1.9607 32.7188 2 13.0 1.9588 32.7189 2 14.0 1.9532 32.7190 2 15.0 1.9459 32.7187 2 16.0 1.9403 32.7184 3 17.0 1.9345 32.7187 2 18.0 1.9258 32.7198 2 19.0 1.9251 32.7200 2 20.0 1.9243 32.7200 2 21.0 1.9242 32.7201 2 22.0 1.9276 32.7205 2 23.0 1.9390 32.7217 3 24.0 1.9530 32.7231 2 25.0 1.9613 32.7241 2 26.0 1.9681 32.7247 1 27.0 1.9759 32.7255 2 28.0 1.9848 32.7262 2 29.0 1.9963 32.7266 3 30.0 2.0035 32.7272 2 31.0 2.0023 32.7275 2 32.0 2.0041 32.7277 2 33.0 2.0107 32.7294 2 34.0 2.0141 32.7300 2 35.0 2.0143 32.7302 2 36.0 2.0148 32.7298 2 37.0 2.0151 32.7296 3 38.0 2.0079 32.7288 2 39.0 2.0023 32.7265 2 40.0 2.0006 32.7267 2 41.0 1.9978 32.7264 2 42.0 1.9941 32.7263 2 43.0 1.9878 32.7256 2 44.0 1.9822 32.7255 3 45.0 1.9816 32.7250 3 46.0 1.9762 32.7227 7