*2013/12/16 15:19:06.62 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : UTC 1999/07/18 21:11:04.000 END TIME : UTC 1999/07/18 21:12:03.500 TIME INCREMENT : 0 0 0 0.5 0 ! (day hr min sec ms) NUMBER OF RECORDS : 45 DATA DESCRIPTION : CTD FILE TYPE : ASCII NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- --------------- -------------- -------------- 1 Pressure decibar 1 45 2 Temperature 'deg C (ITS90)' 1.8692 1.98376 3 Salinity PSS-78 32.7398 32.8309 4 Number_of_bin_records n/a 0 5 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -9.9 ' ' 7 F ' ' 1 2 -9.9 ' ' 9 F ' ' 4 3 ' ' ' ' 9 F ' ' 4 4 ' ' ' ' 3 I I 0 $END $REMARKS This file converted from Sea-Bird file: D:\Data\9922-SBE\Process\99220062.cnv $END *ADMINISTRATION MISSION : 1999-22 AGENCY : IOS, Ocean Physics Division, Sidney, B.C. COUNTRY : Canada PROJECT : Line P SCIENTIST : van Hardenberg B. PLATFORM : Sir Wilfrid Laurier *LOCATION GEOGRAPHIC AREA : Gulf of Alaska & Bering Sea STATION : BSTR-1 EVENT NUMBER : 62 LATITUDE : 66 13.68800 N ! (deg min) LONGITUDE : 168 55.29900 W ! (deg min) WATER DEPTH : 59 *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-19 SERIAL NUMBER : 1030 $TABLE: SENSORS ! Name Abs Depth Serial No ! ---- -------------- ---------- ' ' ' ' ' ' $END $REMARKS SOFTWARE VERSION 4.234 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- SBE_IOS 2.0 2002/02/18 13:28:44 1180 1180 REMOVECH 6.0 2002/02/18 19:33:02 1180 1180 CLIP 1.3 2006/01/13 09:45:04 514 383 REMOVECH 7.0 2006/01/16 11:55:50 383 383 FILTERS 4.3 2006/01/17 10:47:48 383 383 CALIB 11.7 2006/01/17 16:05:09 383 383 EXPFILT 1.1 2006/01/25 10:15:58 383 383 FILTERS 4.3 2006/01/25 10:33:12 383 383 DERIVEDQ 3.5 2006/01/26 08:46:53 383 383 SHIFTDAT 3.4 2006/01/26 08:51:28 383 383 CELLTM 1.3 2006/01/26 09:11:30 383 383 DELETE 6.3 2006/01/26 09:14:17 383 136 CALIB 11.7 2006/01/26 09:16:33 136 136 REMOVECH 7.0 2006/01/26 09:18:36 136 136 DERIVEDQ 3.5 2006/01/26 09:24:17 136 136 CLIP 1.3 2006/01/26 11:27:25 136 120 BINAVE 4.1 2006/01/26 13:47:53 120 46 CLIP 1.3 2006/01/30 09:37:40 46 45 REMOVECH 7.0 2006/01/30 09:54:31 45 45 HDREDIT2 2.5.1 2006/03/16 16:16:11 ? ? CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:19:06 45 45 $END $REMARKS -The following CHANNEL(S) were removed from file. Flag -The following CLIP parameters were used. Clip by Record Number Limits First Record,Last Record = 131, 513 Time Calculated from Start and Interval: Get Start Time from Header Get Time Increment from Header -REMOVECH 2006/01/16 11:55:50 The following CHANNEL(S) were removed: Scan_Number -The following FILTER parameters were used. Boxcar filter was used. Filter width = 5 The following channel(s) were filtered. Pressure:Corrected -CALIB parameters: 2006/01/17 16:05:09 Calibration type = Raw Mode: ONLY - calibration specs from Cal File only. Calibration file = D:\9922\Cratio-mS-cm.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 3 Conductivity:Primary ratio 10 0.0000000E+00 0.2330240E-01 0.0000000E+00 0.0000000E+00 0.0000000E+00 -The following EXPFILT parameters were used: Channels to Filter: Conductivity:Primary Salinity will NOT be Recalculated after Filtering Sampling Interval: 0.500 Filter Time Response: 0.500 Calculated Filter Coeff a= 0.582 -The following FILTER parameters were used. Boxcar filter was used. Filter width varies with Temperature:Primary : 20.0000 5 The following channel(s) were filtered. Temperature:Primary -The following DERIVEQ parameters were used Reference channel for pressure is: Pressure:Corrected Reference channel for temperature is: Temperature:Primary Reference channel for conductivity ratio is: Conductivity:Primary Reference channel for salinity is: Salinity Reference channel for oxygen is: Oxygen:Dissolved:SBE Computed properties Derived Properties Ref Press Temp Type Replace ------------------ --------- --------- ------- Salinity Insitu Insitu YES -The following SHIFT parameters were used. Shift Channel: Temperature:Primary # of Records to Advance (-ve for Delay): At REC# 0 Shift= 0.90 Salinity was recalculated after shift -The following CELLTM parameters were used. Value for alpha = 0.0180, Value for tau = 12.0000 Temperature channel: Temperature:Primary -The following DELETE parameters were used: Surface Record Removal: Off Pressure filtered over width: 5 Swells deleted. Warning message if pressure difference of 2.00 Drop rates < 0.30m/s (calculated over 5 points) will be deleted. Drop rate applies in the range 1.00 to 40.41 dbars Sample interval (from FILE section of header) = 0.500 seconds. -CALIB parameters: 2006/01/26 09:16:33 Calibration type = Correct Mode: UNION - calibration specs from Header and Cal File. Salinity is computed Calibration file = D:\9922\T-adj.CCF Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 2 Temperature:Primary C 10 0.1000000E-01 0.1000000E+01 Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 5 Salinity PSS-78 130 Pressure:Corrected Temperature:Primary Conductivity:Primary -REMOVECH 2006/01/26 09:18:36 The following CHANNEL(S) were removed: Temperature:Primary [C] Descent_Rate [m/s] Salinity [PSS-78] -The following DERIVEQ parameters were used Reference channel for pressure is: Pressure:Corrected Reference channel for temperature is: Temperature:Primary:cell Reference channel for conductivity ratio is: Conductivity:Primary Reference channel for salinity is: Salinity Reference channel for oxygen is: Oxygen:Dissolved:SBE Computed properties Derived Properties Ref Press Temp Type Replace ------------------ --------- --------- ------- Salinity Insitu Insitu YES -The following CLIP parameters were used. Clip by Channel Range Clip Channel: Pressure Min,Max = 0.000, 4000.000 Time Calculated from Start and Interval: Get Start Time from Header Get Time Increment from Header -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 1.00 Minimum bin value = 0.000 Bin value was used Interpolated values were used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CLIP parameters were used. Clip by Channel Range Clip Channel: Pressure Min,Max = 1.000, 2000.000 Time Not Available in File -REMOVECH 2006/01/30 09:54:31 The following CHANNEL(S) were removed: Conductivity [ratio] -HEADER EDITS: 2006/03/16 16:16:11 Applied edit header: O:\Data Processing\Header Comments\Work\1999-22-CTD.TXT Channel 1: Pressure [dbar] Units: DBAR ==> dbar Format: F13.3 ==> F7.1 Channel 2: Temperature [DEG C (ITS90)] Format: F13.4 ==> F9.4 Channel 3: Salinity [PSS-78] Format: F13.4 ==> F9.4 Channel 4: Number_of_bin_records [n/a] Format: I13 ==> I3 $END *COMMENTS SBE HEADER Sea-Bird SBE 19 Data File: FileName = \9922-SBE\bstr-1.HEX Software Version 4.234 Temperature SN = 1030 Conductivity SN = 1030 System UpLoad Time = Jul 18 1999 15:35:02 Ship: LAURIER Cruise: 9922 Station: BSTR-1 Latitude: 66 13.688 N Longitude: 168 55.299 W remarks: depth= 59 m (55m wire) ds SEACAT PROFILER V3.1b SN 1030 07/18/99 22:36:10.716 strain gauge pressure sensor: S/N = 189759, range = 5000 psia, tc = -221 clk = 32767.828 iop = 139 vmain = 11.9 vlith = 5.7 mode = PROFILE ncasts = 3 sample rate = 1 scan every 0.5 seconds minimum raw conductivity frequency for pump turn on = 2500 hertz pump delay = 40 seconds samples = 2570 free = 84177 lwait = 0 msec SW1 = 88 battery cutoff = 7.3 volts number of voltages sampled = 0 logdata = NO S> cast 0 07/18 21:09:51 samples 0 to 1179 sample rate = 1 scan every 0.5 sec onds stop = switch off # nquan = 6 # nvalues = 1180 # units = specified # name 0 = scan: Scan Count # name 1 = prSM: Pressure, Strain Gauge [db] # name 2 = t090C: Temperature [ITS-90, deg C] # name 3 = c0mS/cm: Conductivity [mS/cm] # name 4 = dz/dtM: Descent Rate [m/s] # name 5 = flag: 0.000e+00 # span 0 = 1, 1180 # span 1 = -10.880, 44.905 # span 2 = 1.8680, 4.2623 # span 3 = -0.990472, 29.288579 # span 4 = -1.170, 1.170 # span 5 = 0.0000e+00, 0.0000e+00 # interval = seconds: 0.5 # start_time = Jul 18 1999 21:09:51 # bad_flag = -9.990e-29 # sensor 0 = Frequency 0 temperature, 1030, 28Aug98 # sensor 1 = Frequency 1 conductivity, 1030, 28Aug98, cpcor = -9.5700e-08 # sensor 2 = Pressure Voltage, 189759, 26Aug98 # datcnv_date = Feb 18 2002 09:42:35, 5.2 # datcnv_in = D:\Data\9922-SBE\HeX\99220062.HEX D:\Data\9922-SBE\HeX\1030-98A.CO N # datcnv_skipover = 0 # file_type = ascii END* *CALIBRATION $TABLE: RAW CHANNELS ! Name Units Fmla Pad Coefficients ! ---------------------- ------- ---- ------ ------------ Conductivity:Primary ratio 10 -99 (0 0.233024E-01 0 0 0) $END $TABLE: CALCULATED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 130 -99 (Pressure:Corrected Temperature:Primary Conductivity:Primary) () $END $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! --------------------- ----- ---- ------ ------------ Temperature:Primary C 10 -99 () (0.1E-01 1) $END !--1--- ---2---- ---3---- 4- !Pressu Temperat Salinity Nu !re ure mb ! ~c ! or ! ds !------ -------- -------- -- *END OF HEADER 1.0 1.9756 32.7398 3 2.0 1.9838 32.7442 3 3.0 1.9661 32.7446 0 4.0 1.9532 32.7435 3 5.0 1.9499 32.7439 4 6.0 1.9409 32.7490 3 7.0 1.9374 32.7536 2 8.0 1.9357 32.7572 3 9.0 1.9339 32.7589 2 10.0 1.9311 32.7637 2 11.0 1.9282 32.7651 2 12.0 1.9244 32.7717 3 13.0 1.9230 32.7775 2 14.0 1.9231 32.7796 3 15.0 1.9281 32.7805 2 16.0 1.9410 32.7902 2 17.0 1.9573 32.7922 3 18.0 1.9658 32.7940 3 19.0 1.9658 32.7943 2 20.0 1.9613 32.7949 2 21.0 1.9543 32.7946 2 22.0 1.9495 32.7953 3 23.0 1.9521 32.7989 3 24.0 1.9556 32.8005 3 25.0 1.9507 32.8072 1 26.0 1.9425 32.8072 2 27.0 1.9221 32.8055 3 28.0 1.8997 32.8047 4 29.0 1.8895 32.8112 2 30.0 1.8870 32.8126 3 31.0 1.8855 32.8134 2 32.0 1.8856 32.8190 2 33.0 1.8870 32.8210 3 34.0 1.8867 32.8223 2 35.0 1.8869 32.8231 3 36.0 1.8884 32.8267 3 37.0 1.8883 32.8297 4 38.0 1.8880 32.8298 2 39.0 1.8878 32.8299 2 40.0 1.8869 32.8309 2 41.0 1.8818 32.8307 3 42.0 1.8724 32.8302 4 43.0 1.8711 32.8297 3 44.0 1.8705 32.8288 3 45.0 1.8692 32.8273 5