*2013/12/16 15:19:06.38 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : UTC 1999/07/16 23:06:49.500 END TIME : UTC 1999/07/16 23:07:31.000 TIME INCREMENT : 0 0 0 0.5 0 ! (day hr min sec ms) NUMBER OF RECORDS : 34 DATA DESCRIPTION : CTD FILE TYPE : ASCII NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- --------------- -------------- -------------- 1 Pressure decibar 1 34 2 Temperature 'deg C (ITS90)' 0.2183 8.3665 3 Salinity PSS-78 30.9056 31.5354 4 Number_of_bin_records n/a 0 6 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -9.9 ' ' 7 F ' ' 1 2 -9.9 ' ' 9 F ' ' 4 3 ' ' ' ' 9 F ' ' 4 4 ' ' ' ' 3 I I 0 $END $REMARKS This file converted from Sea-Bird file: D:\Data\9922-SBE\Process\99220052.cnv $END *ADMINISTRATION MISSION : 1999-22 AGENCY : IOS, Ocean Physics Division, Sidney, B.C. COUNTRY : Canada PROJECT : Line P SCIENTIST : van Hardenberg B. PLATFORM : Sir Wilfrid Laurier *LOCATION GEOGRAPHIC AREA : Gulf of Alaska & Bering Sea STATION : BS-10 EVENT NUMBER : 52 LATITUDE : 61 14.02100 N ! (deg min) LONGITUDE : 169 20.94200 W ! (deg min) WATER DEPTH : 40 *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-19 SERIAL NUMBER : 1030 $TABLE: SENSORS ! Name Abs Depth Serial No ! ---- -------------- ---------- ' ' ' ' ' ' $END $REMARKS SOFTWARE VERSION 4.234 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- SBE_IOS 2.0 2002/02/18 13:28:37 399 399 REMOVECH 6.0 2002/02/18 19:32:58 399 399 CLIP 1.3 2006/01/13 09:39:58 240 237 REMOVECH 7.0 2006/01/16 11:55:49 237 237 FILTERS 4.3 2006/01/17 10:47:47 237 237 CALIB 11.7 2006/01/17 16:05:08 237 237 EXPFILT 1.1 2006/01/19 09:35:02 237 237 FILTERS 4.3 2006/01/19 09:39:39 237 237 DERIVEDQ 3.5 2006/01/19 11:54:02 237 237 SHIFTDAT 3.4 2006/01/19 12:22:05 237 237 CELLTM 1.3 2006/01/19 12:24:00 237 237 DELETE 6.3 2006/01/19 12:34:20 237 91 CALIB 11.7 2006/01/19 12:41:12 91 91 REMOVECH 7.0 2006/01/23 15:01:47 91 91 DERIVEDQ 3.5 2006/01/23 15:07:09 91 91 CLIP 1.3 2006/01/26 11:27:25 91 84 BINAVE 4.1 2006/01/26 13:47:52 84 35 CLIP 1.3 2006/01/30 09:37:40 35 34 REMOVECH 7.0 2006/01/30 09:54:31 34 34 HDREDIT2 2.5.1 2006/03/16 16:16:11 ? ? CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:19:06 34 34 $END $REMARKS -The following CHANNEL(S) were removed from file. Flag -The following CLIP parameters were used. Clip by Record Number Limits First Record,Last Record = 3, 239 Time Calculated from Start and Interval: Get Start Time from Header Get Time Increment from Header -REMOVECH 2006/01/16 11:55:49 The following CHANNEL(S) were removed: Scan_Number -The following FILTER parameters were used. Boxcar filter was used. Filter width = 5 The following channel(s) were filtered. Pressure -CALIB parameters: 2006/01/17 16:05:08 Calibration type = Raw Mode: ONLY - calibration specs from Cal File only. Calibration file = D:\9922\Cratio-mS-cm.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 3 Conductivity ratio 10 0.0000000E+00 0.2330240E-01 0.0000000E+00 0.0000000E+00 0.0000000E+00 -The following EXPFILT parameters were used: Channels to Filter: Conductivity Salinity will NOT be Recalculated after Filtering Sampling Interval: 0.500 Filter Time Response: 0.500 Calculated Filter Coeff a= 0.582 -The following FILTER parameters were used. Boxcar filter was used. Filter width = 3 The following channel(s) were filtered. Temperature -The following DERIVEQ parameters were used Reference channel for pressure is: Pressure Reference channel for temperature is: Temperature Reference channel for conductivity ratio is: Conductivity Reference channel for salinity is: Salinity Reference channel for oxygen is: Oxygen:Dissolved:SBE Computed properties Derived Properties Ref Press Temp Type Replace ------------------ --------- --------- ------- Salinity Insitu Insitu YES -The following SHIFT parameters were used. Shift Channel: Temperature # of Records to Advance (-ve for Delay): At REC# 0 Shift= 0.90 Salinity was recalculated after shift -The following CELLTM parameters were used. Value for alpha = 0.0180, Value for tau = 12.0000 Temperature channel: Temperature -The following DELETE parameters were used: Surface Record Removal: Off Pressure filtered over width: 5 Swells deleted. Warning message if pressure difference of 2.00 Drop rates < 0.30m/s (calculated over 5 points) will be deleted. Drop rate applies in the range 1.00 to 29.43 dbars Sample interval (from FILE section of header) = 0.500 seconds. -CALIB parameters: 2006/01/19 12:41:12 Calibration type = Correct Mode: UNION - calibration specs from Header and Cal File. Salinity is computed Calibration file = D:\9922\T-adj.CCF Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 2 Temperature C 10 0.1000000E-01 0.1000000E+01 Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 5 Salinity PSS-78 130 Pressure Temperature Conductivity -REMOVECH 2006/01/23 15:01:47 The following CHANNEL(S) were removed: Temperature [C] Descent_Rate [m/s] Salinity [PSS-78] -The following DERIVEQ parameters were used Reference channel for pressure is: Pressure Reference channel for temperature is: Temperature Reference channel for conductivity ratio is: Conductivity Reference channel for salinity is: Salinity Reference channel for oxygen is: Oxygen:Dissolved:SBE Computed properties Derived Properties Ref Press Temp Type Replace ------------------ --------- --------- ------- Salinity Insitu Insitu YES -The following CLIP parameters were used. Clip by Channel Range Clip Channel: Pressure Min,Max = 0.000, 4000.000 Time Calculated from Start and Interval: Get Start Time from Header Get Time Increment from Header -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 1.00 Minimum bin value = 0.000 Bin value was used Interpolated values were used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CLIP parameters were used. Clip by Channel Range Clip Channel: Pressure Min,Max = 1.000, 2000.000 Time Not Available in File -REMOVECH 2006/01/30 09:54:31 The following CHANNEL(S) were removed: Conductivity [ratio] -HEADER EDITS: 2006/03/16 16:16:11 Applied edit header: O:\Data Processing\Header Comments\Work\1999-22-CTD.TXT Channel 1: Pressure [dbar] Units: DBAR ==> dbar Format: F13.3 ==> F7.1 Channel 2: Temperature [DEG C (ITS90)] Format: F13.4 ==> F9.4 Channel 3: Salinity [PSS-78] Format: F13.4 ==> F9.4 Channel 4: Number_of_bin_records [n/a] Format: I13 ==> I3 $END *COMMENTS SBE HEADER Sea-Bird SBE 19 Data File: FileName = \9922-SBE\bs-10.HEX Software Version 4.234 Temperature SN = 1030 Conductivity SN = 1030 System UpLoad Time = Jul 16 1999 16:10:47 Ship: LAURIER Cruise: 9922 Station: BS-10 Latitude: 61 14.021 N Longitude: 169 20.942 W remarks: depth= 40 m wire 35m ds SEACAT PROFILER V3.1b SN 1030 07/16/99 23:12:09.740 strain gauge pressure sensor: S/N = 189759, range = 5000 psia, tc = -221 clk = 32768.078 iop = 141 vmain = 12.0 vlith = 5.6 mode = PROFILE ncasts = 1 sample rate = 1 scan every 0.5 seconds minimum raw conductivity frequency for pump turn on = 2500 hertz pump delay = 40 seconds samples = 399 free = 86348 lwait = 0 msec SW1 = 88 battery cutoff = 7.3 volts number of voltages sampled = 0 logdata = NO S> cast 0 07/16 23:06:45 samples 0 to 398 sample rate = 1 scan every 0.5 seco nds stop = switch off # nquan = 6 # nvalues = 399 # units = specified # name 0 = scan: Scan Count # name 1 = prSM: Pressure, Strain Gauge [db] # name 2 = t090C: Temperature [ITS-90, deg C] # name 3 = c0mS/cm: Conductivity [mS/cm] # name 4 = dz/dtM: Descent Rate [m/s] # name 5 = flag: 0.000e+00 # span 0 = 1, 399 # span 1 = -10.880, 31.858 # span 2 = 0.1805, 9.1054 # span 3 = 0.257043, 33.267392 # span 4 = -1.170, 1.260 # span 5 = 0.0000e+00, 0.0000e+00 # interval = seconds: 0.5 # start_time = Jul 16 1999 23:06:45 # bad_flag = -9.990e-29 # sensor 0 = Frequency 0 temperature, 1030, 28Aug98 # sensor 1 = Frequency 1 conductivity, 1030, 28Aug98, cpcor = -9.5700e-08 # sensor 2 = Pressure Voltage, 189759, 26Aug98 # datcnv_date = Feb 18 2002 09:42:33, 5.2 # datcnv_in = D:\Data\9922-SBE\HeX\99220052.HEX D:\Data\9922-SBE\HeX\1030-98A.CO N # datcnv_skipover = 0 # file_type = ascii END* *CALIBRATION $TABLE: RAW CHANNELS ! Name Units Fmla Pad Coefficients ! -------------- ------- ---- ------ ------------ Conductivity ratio 10 -99 (0 0.233024E-01 0 0 0) $END $TABLE: CALCULATED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 130 -99 (Pressure Temperature Conductivity) () $END $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ------------- ----- ---- ------ ------------ Temperature C 10 -99 () (0.1E-01 1) $END !--1--- ---2---- ---3---- 4- !Pressu Temperat Salinity Nu !re ure mb ! ~c ! or ! ds !------ -------- -------- -- *END OF HEADER 1.0 8.3665 31.0377 5 2.0 8.2962 31.0327 0 3.0 8.2259 31.0277 4 4.0 8.1253 31.0262 2 5.0 7.9208 31.0063 2 6.0 7.7728 31.0028 2 7.0 7.5677 31.0167 2 8.0 7.8348 31.0686 3 9.0 7.9997 31.1006 2 10.0 7.3700 31.2665 2 11.0 5.3638 31.2803 2 12.0 3.6682 31.1808 3 13.0 3.6509 31.1828 2 14.0 3.9283 31.2154 2 15.0 4.9511 31.3492 2 16.0 5.2632 31.3883 2 17.0 4.0150 31.2320 2 18.0 2.6627 31.0911 3 19.0 3.0961 31.1332 2 20.0 3.2522 31.1515 2 21.0 2.8533 31.1538 2 22.0 1.4108 31.1860 2 23.0 0.5891 31.2611 2 24.0 0.3864 31.2908 3 25.0 0.3169 31.2908 2 26.0 0.2858 31.2938 2 27.0 0.2649 31.2999 2 28.0 0.2508 31.3045 2 29.0 0.2405 31.3070 2 30.0 0.2349 31.3097 2 31.0 0.2286 31.3128 3 32.0 0.2230 31.3144 2 33.0 0.2183 31.3168 3 34.0 0.2346 31.3055 6