*2013/12/16 15:19:06.35 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : UTC 1999/07/16 18:26:30.500 END TIME : UTC 1999/07/16 18:27:19.500 TIME INCREMENT : 0 0 0 0.5 0 ! (day hr min sec ms) NUMBER OF RECORDS : 43 DATA DESCRIPTION : CTD FILE TYPE : ASCII NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- --------------- -------------- -------------- 1 Pressure decibar 1 43 2 Temperature 'deg C (ITS90)' -0.4608 7.0353 3 Salinity PSS-78 30.7446 31.3637 4 Number_of_bin_records n/a 1 7 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -9.9 ' ' 7 F ' ' 1 2 -9.9 ' ' 9 F ' ' 4 3 ' ' ' ' 9 F ' ' 4 4 ' ' ' ' 3 I I 0 $END $REMARKS This file converted from Sea-Bird file: D:\Data\9922-SBE\Process\99220051.cnv $END *ADMINISTRATION MISSION : 1999-22 AGENCY : IOS, Ocean Physics Division, Sidney, B.C. COUNTRY : Canada PROJECT : Line P SCIENTIST : van Hardenberg B. PLATFORM : Sir Wilfrid Laurier *LOCATION GEOGRAPHIC AREA : Gulf of Alaska & Bering Sea STATION : BS-9 EVENT NUMBER : 51 LATITUDE : 60 24.46100 N ! (deg min) LONGITUDE : 169 47.06000 W ! (deg min) WATER DEPTH : 51 *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-19 SERIAL NUMBER : 1030 $TABLE: SENSORS ! Name Abs Depth Serial No ! ---- -------------- ---------- ' ' ' ' ' ' $END $REMARKS SOFTWARE VERSION 4.234 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- SBE_IOS 2.0 2002/02/18 13:28:37 358 358 REMOVECH 6.0 2002/02/18 19:32:58 358 358 CLIP 1.3 2006/01/13 09:39:27 230 216 REMOVECH 7.0 2006/01/16 11:55:49 216 216 FILTERS 4.3 2006/01/17 10:47:47 216 216 CALIB 11.7 2006/01/17 16:05:08 216 216 EXPFILT 1.1 2006/01/19 09:35:02 216 216 FILTERS 4.3 2006/01/19 09:39:39 216 216 DERIVEDQ 3.5 2006/01/19 11:54:02 216 216 SHIFTDAT 3.4 2006/01/19 12:22:05 216 216 CELLTM 1.3 2006/01/19 12:24:00 216 216 DELETE 6.3 2006/01/19 12:34:19 216 101 CALIB 11.7 2006/01/19 12:41:12 101 101 REMOVECH 7.0 2006/01/23 15:01:47 101 101 DERIVEDQ 3.5 2006/01/23 15:07:09 101 101 CLIP 1.3 2006/01/26 11:27:24 101 99 BINAVE 4.1 2006/01/26 13:47:52 99 44 CLIP 1.3 2006/01/30 09:37:40 44 43 REMOVECH 7.0 2006/01/30 09:54:31 43 43 HDREDIT2 2.5.1 2006/03/16 16:16:11 ? ? CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:19:06 43 43 $END $REMARKS -The following CHANNEL(S) were removed from file. Flag -The following CLIP parameters were used. Clip by Record Number Limits First Record,Last Record = 14, 229 Time Calculated from Start and Interval: Get Start Time from Header Get Time Increment from Header -REMOVECH 2006/01/16 11:55:49 The following CHANNEL(S) were removed: Scan_Number -The following FILTER parameters were used. Boxcar filter was used. Filter width = 5 The following channel(s) were filtered. Pressure -CALIB parameters: 2006/01/17 16:05:08 Calibration type = Raw Mode: ONLY - calibration specs from Cal File only. Calibration file = D:\9922\Cratio-mS-cm.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 3 Conductivity ratio 10 0.0000000E+00 0.2330240E-01 0.0000000E+00 0.0000000E+00 0.0000000E+00 -The following EXPFILT parameters were used: Channels to Filter: Conductivity Salinity will NOT be Recalculated after Filtering Sampling Interval: 0.500 Filter Time Response: 0.500 Calculated Filter Coeff a= 0.582 -The following FILTER parameters were used. Boxcar filter was used. Filter width = 3 The following channel(s) were filtered. Temperature -The following DERIVEQ parameters were used Reference channel for pressure is: Pressure Reference channel for temperature is: Temperature Reference channel for conductivity ratio is: Conductivity Reference channel for salinity is: Salinity Reference channel for oxygen is: Oxygen:Dissolved:SBE Computed properties Derived Properties Ref Press Temp Type Replace ------------------ --------- --------- ------- Salinity Insitu Insitu YES -The following SHIFT parameters were used. Shift Channel: Temperature # of Records to Advance (-ve for Delay): At REC# 0 Shift= 0.90 Salinity was recalculated after shift -The following CELLTM parameters were used. Value for alpha = 0.0180, Value for tau = 12.0000 Temperature channel: Temperature -The following DELETE parameters were used: Surface Record Removal: Off Pressure filtered over width: 5 Swells deleted. Warning message if pressure difference of 2.00 Drop rates < 0.30m/s (calculated over 5 points) will be deleted. Drop rate applies in the range 1.00 to 38.45 dbars Sample interval (from FILE section of header) = 0.500 seconds. -CALIB parameters: 2006/01/19 12:41:12 Calibration type = Correct Mode: UNION - calibration specs from Header and Cal File. Salinity is computed Calibration file = D:\9922\T-adj.CCF Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 2 Temperature C 10 0.1000000E-01 0.1000000E+01 Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 5 Salinity PSS-78 130 Pressure Temperature Conductivity -REMOVECH 2006/01/23 15:01:47 The following CHANNEL(S) were removed: Temperature [C] Descent_Rate [m/s] Salinity [PSS-78] -The following DERIVEQ parameters were used Reference channel for pressure is: Pressure Reference channel for temperature is: Temperature Reference channel for conductivity ratio is: Conductivity Reference channel for salinity is: Salinity Reference channel for oxygen is: Oxygen:Dissolved:SBE Computed properties Derived Properties Ref Press Temp Type Replace ------------------ --------- --------- ------- Salinity Insitu Insitu YES -The following CLIP parameters were used. Clip by Channel Range Clip Channel: Pressure Min,Max = 0.000, 4000.000 Time Calculated from Start and Interval: Get Start Time from Header Get Time Increment from Header -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 1.00 Minimum bin value = 0.000 Bin value was used Interpolated values were used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CLIP parameters were used. Clip by Channel Range Clip Channel: Pressure Min,Max = 1.000, 2000.000 Time Not Available in File -REMOVECH 2006/01/30 09:54:31 The following CHANNEL(S) were removed: Conductivity [ratio] -HEADER EDITS: 2006/03/16 16:16:11 Applied edit header: O:\Data Processing\Header Comments\Work\1999-22-CTD.TXT Channel 1: Pressure [dbar] Units: DBAR ==> dbar Format: F13.3 ==> F7.1 Channel 2: Temperature [DEG C (ITS90)] Format: F13.4 ==> F9.4 Channel 3: Salinity [PSS-78] Format: F13.4 ==> F9.4 Channel 4: Number_of_bin_records [n/a] Format: I13 ==> I3 $END *COMMENTS SBE HEADER Sea-Bird SBE 19 Data File: FileName = \9922-SBE\BS-9.HEX Software Version 4.234 Temperature SN = 1030 Conductivity SN = 1030 System UpLoad Time = Jul 16 1999 11:30:56 Ship: LAURIER Cruise: 9922 Station: BS-9 Latitude: 60 24.461 N Longitude: 169 47.060 W remarks: depth= 51 m wire 45m ds SEACAT PROFILER V3.1b SN 1030 07/16/99 18:32:19.476 strain gauge pressure sensor: S/N = 189759, range = 5000 psia, tc = -221 clk = 32767.945 iop = 141 vmain = 12.1 vlith = 5.6 mode = PROFILE ncasts = 1 sample rate = 1 scan every 0.5 seconds minimum raw conductivity frequency for pump turn on = 2500 hertz pump delay = 40 seconds samples = 358 free = 86389 lwait = 0 msec SW1 = 88 battery cutoff = 7.3 volts number of voltages sampled = 0 logdata = NO S> cast 0 07/16 18:26:23 samples 0 to 357 sample rate = 1 scan every 0.5 seco nds stop = switch off # nquan = 6 # nvalues = 358 # units = specified # name 0 = scan: Scan Count # name 1 = prSM: Pressure, Strain Gauge [db] # name 2 = t090C: Temperature [ITS-90, deg C] # name 3 = c0mS/cm: Conductivity [mS/cm] # name 4 = dz/dtM: Descent Rate [m/s] # name 5 = flag: 0.000e+00 # span 0 = 1, 358 # span 1 = -10.880, 40.406 # span 2 = -0.4784, 7.5102 # span 3 = 0.240308, 31.805280 # span 4 = -1.440, 1.350 # span 5 = 0.0000e+00, 0.0000e+00 # interval = seconds: 0.5 # start_time = Jul 16 1999 18:26:23 # bad_flag = -9.990e-29 # sensor 0 = Frequency 0 temperature, 1030, 28Aug98 # sensor 1 = Frequency 1 conductivity, 1030, 28Aug98, cpcor = -9.5700e-08 # sensor 2 = Pressure Voltage, 189759, 26Aug98 # datcnv_date = Feb 18 2002 09:42:33, 5.2 # datcnv_in = D:\Data\9922-SBE\HeX\99220051.HEX D:\Data\9922-SBE\HeX\1030-98A.CO N # datcnv_skipover = 0 # file_type = ascii END* *CALIBRATION $TABLE: RAW CHANNELS ! Name Units Fmla Pad Coefficients ! -------------- ------- ---- ------ ------------ Conductivity ratio 10 -99 (0 0.233024E-01 0 0 0) $END $TABLE: CALCULATED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 130 -99 (Pressure Temperature Conductivity) () $END $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ------------- ----- ---- ------ ------------ Temperature C 10 -99 () (0.1E-01 1) $END !--1--- ---2---- ---3---- 4- !Pressu Temperat Salinity Nu !re ure mb ! ~c ! or ! ds !------ -------- -------- -- *END OF HEADER 1.0 7.0353 30.7446 5 2.0 7.0124 31.0383 2 3.0 7.0112 31.0434 2 4.0 7.0111 31.0452 2 5.0 7.0086 31.0471 2 6.0 6.9986 31.0508 2 7.0 6.9336 31.0757 2 8.0 6.6734 31.1257 2 9.0 5.7682 31.1513 2 10.0 3.8813 31.1603 2 11.0 2.8455 31.1694 1 12.0 2.2510 31.1829 2 13.0 1.6662 31.1848 2 14.0 1.4157 31.1919 2 15.0 1.2919 31.2033 2 16.0 1.0814 31.2095 2 17.0 0.8580 31.2111 2 18.0 0.6206 31.2123 2 19.0 0.4274 31.2140 2 20.0 0.3301 31.2220 2 21.0 0.2832 31.2281 1 22.0 0.2180 31.2373 2 23.0 0.1066 31.2598 2 24.0 -0.0127 31.2745 2 25.0 -0.0905 31.2869 2 26.0 -0.1304 31.2953 2 27.0 -0.1570 31.2973 2 28.0 -0.1799 31.3008 2 29.0 -0.1956 31.3041 1 30.0 -0.2150 31.3082 2 31.0 -0.2516 31.3170 2 32.0 -0.2826 31.3242 2 33.0 -0.2975 31.3294 2 34.0 -0.3112 31.3326 2 35.0 -0.3339 31.3377 2 36.0 -0.3478 31.3446 2 37.0 -0.3786 31.3517 3 38.0 -0.4087 31.3586 2 39.0 -0.4238 31.3612 2 40.0 -0.4369 31.3627 2 41.0 -0.4492 31.3637 3 42.0 -0.4573 31.3628 2 43.0 -0.4608 31.3598 7