*2013/12/16 15:19:06.24 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : UTC 1999/07/15 17:44:18.500 END TIME : UTC 1999/07/15 17:47:24.500 TIME INCREMENT : 0 0 0 0.5 0 ! (day hr min sec ms) NUMBER OF RECORDS : 157 DATA DESCRIPTION : CTD FILE TYPE : ASCII NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- --------------- -------------- -------------- 1 Pressure decibar 1 157 2 Temperature 'deg C (ITS90)' 2.9355 7.6705 3 Salinity PSS-78 30.9874 33.1541 4 Number_of_bin_records n/a 1 6 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -9.9 ' ' 7 F ' ' 1 2 -9.9 ' ' 9 F ' ' 4 3 ' ' ' ' 9 F ' ' 4 4 ' ' ' ' 3 I I 0 $END $REMARKS This file converted from Sea-Bird file: D:\Data\9922-SBE\Process\99220047.cnv $END *ADMINISTRATION MISSION : 1999-22 AGENCY : IOS, Ocean Physics Division, Sidney, B.C. COUNTRY : Canada PROJECT : Line P SCIENTIST : van Hardenberg B. PLATFORM : Sir Wilfrid Laurier *LOCATION GEOGRAPHIC AREA : Gulf of Alaska & Bering Sea STATION : BS-5 EVENT NUMBER : 47 LATITUDE : 56 15.17700 N ! (deg min) LONGITUDE : 168 43.74700 W ! (deg min) WATER DEPTH : 182 *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-19 SERIAL NUMBER : 1030 $TABLE: SENSORS ! Name Abs Depth Serial No ! ---- -------------- ---------- ' ' ' ' ' ' $END $REMARKS SOFTWARE VERSION 4.234 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- SBE_IOS 2.0 2002/02/18 13:28:34 908 908 REMOVECH 6.0 2002/02/18 19:32:56 908 908 CLIP 1.3 2006/01/13 09:37:00 496 470 REMOVECH 7.0 2006/01/16 11:55:48 470 470 FILTERS 4.3 2006/01/17 10:47:47 470 470 CALIB 11.7 2006/01/17 16:05:08 470 470 EXPFILT 1.1 2006/01/19 09:35:02 470 470 FILTERS 4.3 2006/01/19 09:39:39 470 470 DERIVEDQ 3.5 2006/01/19 11:54:01 470 470 SHIFTDAT 3.4 2006/01/19 12:22:05 470 470 CELLTM 1.3 2006/01/19 12:23:59 470 470 DELETE 6.3 2006/01/19 12:34:19 470 373 CALIB 11.7 2006/01/19 12:41:12 373 373 REMOVECH 7.0 2006/01/23 15:01:47 373 373 DERIVEDQ 3.5 2006/01/23 15:07:09 373 373 CLIP 1.3 2006/01/26 11:27:24 373 373 BINAVE 4.1 2006/01/26 13:47:52 373 158 CLIP 1.3 2006/01/30 09:37:39 158 157 REMOVECH 7.0 2006/01/30 09:54:30 157 157 HDREDIT2 2.5.1 2006/03/16 16:16:11 ? ? CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:19:06 157 157 $END $REMARKS -The following CHANNEL(S) were removed from file. Flag -The following CLIP parameters were used. Clip by Record Number Limits First Record,Last Record = 26, 495 Time Calculated from Start and Interval: Get Start Time from Header Get Time Increment from Header -REMOVECH 2006/01/16 11:55:48 The following CHANNEL(S) were removed: Scan_Number -The following FILTER parameters were used. Boxcar filter was used. Filter width = 5 The following channel(s) were filtered. Pressure -CALIB parameters: 2006/01/17 16:05:08 Calibration type = Raw Mode: ONLY - calibration specs from Cal File only. Calibration file = D:\9922\Cratio-mS-cm.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 3 Conductivity ratio 10 0.0000000E+00 0.2330240E-01 0.0000000E+00 0.0000000E+00 0.0000000E+00 -The following EXPFILT parameters were used: Channels to Filter: Conductivity Salinity will NOT be Recalculated after Filtering Sampling Interval: 0.500 Filter Time Response: 0.500 Calculated Filter Coeff a= 0.582 -The following FILTER parameters were used. Boxcar filter was used. Filter width = 3 The following channel(s) were filtered. Temperature -The following DERIVEQ parameters were used Reference channel for pressure is: Pressure Reference channel for temperature is: Temperature Reference channel for conductivity ratio is: Conductivity Reference channel for salinity is: Salinity Reference channel for oxygen is: Oxygen:Dissolved:SBE Computed properties Derived Properties Ref Press Temp Type Replace ------------------ --------- --------- ------- Salinity Insitu Insitu YES -The following SHIFT parameters were used. Shift Channel: Temperature # of Records to Advance (-ve for Delay): At REC# 0 Shift= 0.90 Salinity was recalculated after shift -The following CELLTM parameters were used. Value for alpha = 0.0180, Value for tau = 12.0000 Temperature channel: Temperature -The following DELETE parameters were used: Surface Record Removal: Off Pressure filtered over width: 5 Swells deleted. Warning message if pressure difference of 2.00 Drop rates < 0.30m/s (calculated over 5 points) will be deleted. Drop rate applies in the range 1.00 to 152.39 dbars Sample interval (from FILE section of header) = 0.500 seconds. -CALIB parameters: 2006/01/19 12:41:12 Calibration type = Correct Mode: UNION - calibration specs from Header and Cal File. Salinity is computed Calibration file = D:\9922\T-adj.CCF Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 2 Temperature C 10 0.1000000E-01 0.1000000E+01 Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 5 Salinity PSS-78 130 Pressure Temperature Conductivity -REMOVECH 2006/01/23 15:01:47 The following CHANNEL(S) were removed: Temperature [C] Descent_Rate [m/s] Salinity [PSS-78] -The following DERIVEQ parameters were used Reference channel for pressure is: Pressure Reference channel for temperature is: Temperature Reference channel for conductivity ratio is: Conductivity Reference channel for salinity is: Salinity Reference channel for oxygen is: Oxygen:Dissolved:SBE Computed properties Derived Properties Ref Press Temp Type Replace ------------------ --------- --------- ------- Salinity Insitu Insitu YES -The following CLIP parameters were used. Clip by Channel Range Clip Channel: Pressure Min,Max = 0.000, 4000.000 Time Calculated from Start and Interval: Get Start Time from Header Get Time Increment from Header -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 1.00 Minimum bin value = 0.000 Bin value was used Interpolated values were used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CLIP parameters were used. Clip by Channel Range Clip Channel: Pressure Min,Max = 1.000, 2000.000 Time Not Available in File -REMOVECH 2006/01/30 09:54:30 The following CHANNEL(S) were removed: Conductivity [ratio] -HEADER EDITS: 2006/03/16 16:16:11 Applied edit header: O:\Data Processing\Header Comments\Work\1999-22-CTD.TXT Channel 1: Pressure [dbar] Units: DBAR ==> dbar Format: F13.3 ==> F7.1 Channel 2: Temperature [DEG C (ITS90)] Format: F13.4 ==> F9.4 Channel 3: Salinity [PSS-78] Format: F13.4 ==> F9.4 Channel 4: Number_of_bin_records [n/a] Format: I13 ==> I3 $END *COMMENTS SBE HEADER Sea-Bird SBE 19 Data File: FileName = \9922-SBE\bs-5.HEX Software Version 4.234 Temperature SN = 1030 Conductivity SN = 1030 System UpLoad Time = Jul 15 1999 10:55:49 Ship: LAURIER Cruise: 9922 Station: BS-5 Latitude: 56 15.177 N Longitude: 168 43.747 W remarks: depth= 182 (wire 175) ds SEACAT PROFILER V3.1b SN 1030 07/15/99 17:57:14.144 strain gauge pressure sensor: S/N = 189759, range = 5000 psia, tc = -221 clk = 32767.969 iop = 141 vmain = 12.1 vlith = 5.6 mode = PROFILE ncasts = 1 sample rate = 1 scan every 0.5 seconds minimum raw conductivity frequency for pump turn on = 2500 hertz pump delay = 40 seconds samples = 908 free = 85839 lwait = 0 msec SW1 = 88 battery cutoff = 7.3 volts number of voltages sampled = 0 logdata = NO S> cast 0 07/15 17:44:06 samples 0 to 907 sample rate = 1 scan every 0.5 seco nds stop = switch off # nquan = 6 # nvalues = 908 # units = specified # name 0 = scan: Scan Count # name 1 = prSM: Pressure, Strain Gauge [db] # name 2 = t090C: Temperature [ITS-90, deg C] # name 3 = c0mS/cm: Conductivity [mS/cm] # name 4 = dz/dtM: Descent Rate [m/s] # name 5 = flag: 0.000e+00 # span 0 = 1, 908 # span 1 = -10.880, 156.469 # span 2 = 2.9267, 7.8359 # span 3 = 0.502622, 33.619731 # span 4 = -1.529, 1.710 # span 5 = 0.0000e+00, 0.0000e+00 # interval = seconds: 0.5 # start_time = Jul 15 1999 17:44:06 # bad_flag = -9.990e-29 # sensor 0 = Frequency 0 temperature, 1030, 28Aug98 # sensor 1 = Frequency 1 conductivity, 1030, 28Aug98, cpcor = -9.5700e-08 # sensor 2 = Pressure Voltage, 189759, 26Aug98 # datcnv_date = Feb 18 2002 09:42:32, 5.2 # datcnv_in = D:\Data\9922-SBE\HeX\99220047.HEX D:\Data\9922-SBE\HeX\1030-98A.CO N # datcnv_skipover = 0 # file_type = ascii END* *CALIBRATION $TABLE: RAW CHANNELS ! Name Units Fmla Pad Coefficients ! -------------- ------- ---- ------ ------------ Conductivity ratio 10 -99 (0 0.233024E-01 0 0 0) $END $TABLE: CALCULATED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 130 -99 (Pressure Temperature Conductivity) () $END $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ------------- ----- ---- ------ ------------ Temperature C 10 -99 () (0.1E-01 1) $END !--1--- ---2---- ---3---- 4- !Pressu Temperat Salinity Nu !re ure mb ! ~c ! or ! ds !------ -------- -------- -- *END OF HEADER 1.0 7.6705 30.9874 5 2.0 7.6629 32.4265 2 3.0 7.6630 32.4276 5 4.0 7.6636 32.4284 2 5.0 7.6630 32.4309 3 6.0 7.6612 32.4325 3 7.0 7.6615 32.4325 2 8.0 7.6635 32.4324 2 9.0 7.6643 32.4326 2 10.0 7.6640 32.4328 2 11.0 7.6640 32.4337 2 12.0 7.6640 32.4347 2 13.0 7.6640 32.4370 2 14.0 7.6638 32.4387 2 15.0 7.6637 32.4403 2 16.0 7.6640 32.4424 2 17.0 7.6637 32.4448 3 18.0 7.6596 32.4614 2 19.0 7.6571 32.4657 2 20.0 7.6546 32.4662 2 21.0 7.6496 32.4660 2 22.0 7.6455 32.4664 2 23.0 7.6441 32.4700 3 24.0 7.6339 32.4734 2 25.0 7.5918 32.4788 2 26.0 7.4962 32.4662 2 27.0 7.4141 32.4661 2 28.0 7.3656 32.4636 2 29.0 7.2675 32.4629 3 30.0 6.9267 32.4629 2 31.0 6.5097 32.4408 1 32.0 6.0972 32.4162 3 33.0 5.7091 32.3965 2 34.0 5.1813 32.3867 3 35.0 4.3082 32.3762 2 36.0 3.7289 32.3547 1 37.0 3.4159 32.3386 2 38.0 3.2583 32.3326 3 39.0 3.1930 32.3344 2 40.0 3.1692 32.3400 2 41.0 3.1371 32.3591 2 42.0 3.0982 32.3758 2 43.0 3.0747 32.3992 2 44.0 3.0484 32.4172 3 45.0 3.0266 32.4438 2 46.0 3.0095 32.4616 2 47.0 2.9951 32.4937 2 48.0 2.9996 32.5412 3 49.0 3.0017 32.5576 2 50.0 2.9993 32.5769 2 51.0 2.9945 32.5864 2 52.0 2.9921 32.5903 2 53.0 2.9942 32.5926 3 54.0 2.9753 32.6181 3 55.0 2.9557 32.6369 1 56.0 2.9599 32.6377 2 57.0 2.9576 32.6379 2 58.0 2.9530 32.6416 3 59.0 2.9516 32.6474 2 60.0 2.9426 32.6690 3 61.0 2.9355 32.6867 1 62.0 2.9433 32.7120 3 63.0 2.9564 32.7312 2 64.0 2.9725 32.7461 3 65.0 2.9900 32.7588 2 66.0 2.9995 32.7693 3 67.0 3.0073 32.7759 2 68.0 3.0265 32.7907 2 69.0 3.0551 32.8248 2 70.0 3.0878 32.8544 2 71.0 3.1342 32.8786 3 72.0 3.1666 32.8901 2 73.0 3.1748 32.8925 2 74.0 3.1792 32.8945 3 75.0 3.1827 32.8955 2 76.0 3.1848 32.8960 2 77.0 3.1863 32.8958 3 78.0 3.1887 32.8955 2 79.0 3.1935 32.8955 2 80.0 3.1986 32.8966 2 81.0 3.2080 32.8991 3 82.0 3.2327 32.9159 2 83.0 3.2586 32.9247 2 84.0 3.2927 32.9461 2 85.0 3.3356 32.9755 3 86.0 3.3588 32.9832 2 87.0 3.3780 32.9879 2 88.0 3.4031 33.0045 3 89.0 3.4194 33.0165 3 90.0 3.4208 33.0229 2 91.0 3.4107 33.0298 2 92.0 3.3935 33.0348 2 93.0 3.3859 33.0373 2 94.0 3.3882 33.0419 2 95.0 3.3902 33.0432 2 96.0 3.3873 33.0507 3 97.0 3.3819 33.0569 2 98.0 3.3798 33.0584 2 99.0 3.3767 33.0600 3 100.0 3.3729 33.0653 2 101.0 3.3688 33.0681 2 102.0 3.3649 33.0866 2 103.0 3.3630 33.0927 3 104.0 3.3623 33.0976 4 105.0 3.3626 33.0977 2 106.0 3.3586 33.1111 2 107.0 3.3515 33.1253 2 108.0 3.3547 33.1277 2 109.0 3.3580 33.1280 2 110.0 3.3585 33.1269 2 111.0 3.3586 33.1263 2 112.0 3.3586 33.1250 3 113.0 3.3587 33.1247 2 114.0 3.3587 33.1230 2 115.0 3.3586 33.1240 2 116.0 3.3587 33.1255 3 117.0 3.3594 33.1248 2 118.0 3.3592 33.1244 3 119.0 3.3591 33.1239 2 120.0 3.3597 33.1229 2 121.0 3.3603 33.1223 3 122.0 3.3605 33.1226 2 123.0 3.3599 33.1236 3 124.0 3.3602 33.1224 2 125.0 3.3608 33.1215 2 126.0 3.3614 33.1215 2 127.0 3.3624 33.1210 2 128.0 3.3628 33.1235 3 129.0 3.3632 33.1233 3 130.0 3.3636 33.1228 2 131.0 3.3637 33.1213 2 132.0 3.3639 33.1210 2 133.0 3.3643 33.1195 3 134.0 3.3644 33.1192 2 135.0 3.3647 33.1174 2 136.0 3.3654 33.1168 3 137.0 3.3655 33.1160 2 138.0 3.3658 33.1150 3 139.0 3.3660 33.1135 2 140.0 3.3660 33.1133 2 141.0 3.3661 33.1126 2 142.0 3.3664 33.1117 3 143.0 3.3661 33.1108 2 144.0 3.3667 33.1111 3 145.0 3.3675 33.1105 2 146.0 3.3677 33.1076 3 147.0 3.3674 33.1073 2 148.0 3.3677 33.1064 2 149.0 3.3683 33.1051 3 150.0 3.3677 33.1054 2 151.0 3.3686 33.1053 3 152.0 3.3689 33.1020 3 153.0 3.3687 33.1012 2 154.0 3.3690 33.1009 3 155.0 3.3687 33.1014 2 156.0 3.3693 33.1018 4 157.0 3.3666 33.1150 6