*2013/12/16 15:19:06.20 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : UTC 1999/07/15 14:04:42.500 END TIME : UTC 1999/07/15 14:07:41.500 TIME INCREMENT : 0 0 0 0.5 0 ! (day hr min sec ms) NUMBER OF RECORDS : 154 DATA DESCRIPTION : CTD FILE TYPE : ASCII NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- --------------- -------------- -------------- 1 Pressure decibar 1 154 2 Temperature 'deg C (ITS90)' 3.4529 7.7388 3 Salinity PSS-78 32.6543 33.2698 4 Number_of_bin_records n/a 1 15 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -9.9 ' ' 7 F ' ' 1 2 -9.9 ' ' 9 F ' ' 4 3 ' ' ' ' 9 F ' ' 4 4 ' ' ' ' 3 I I 0 $END $REMARKS This file converted from Sea-Bird file: D:\Data\9922-SBE\Process\99220046.cnv $END *ADMINISTRATION MISSION : 1999-22 AGENCY : IOS, Ocean Physics Division, Sidney, B.C. COUNTRY : Canada PROJECT : Line P SCIENTIST : van Hardenberg B. PLATFORM : Sir Wilfrid Laurier *LOCATION GEOGRAPHIC AREA : Gulf of Alaska & Bering Sea STATION : BS-4 EVENT NUMBER : 46 LATITUDE : 55 38.05600 N ! (deg min) LONGITUDE : 168 34.91600 W ! (deg min) WATER DEPTH : 220 *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-19 SERIAL NUMBER : 1030 $TABLE: SENSORS ! Name Abs Depth Serial No ! ---- -------------- ---------- ' ' ' ' ' ' $END $REMARKS SOFTWARE VERSION 4.234 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- SBE_IOS 2.0 2002/02/18 13:28:33 1154 1154 REMOVECH 6.0 2002/02/18 19:32:55 1154 1154 CLIP 1.3 2006/01/13 09:36:35 752 642 REMOVECH 7.0 2006/01/16 11:55:48 642 642 FILTERS 4.3 2006/01/17 10:47:47 642 642 CALIB 11.7 2006/01/17 16:05:08 642 642 EXPFILT 1.1 2006/01/19 09:35:02 642 642 FILTERS 4.3 2006/01/19 09:39:39 642 642 DERIVEDQ 3.5 2006/01/19 11:54:01 642 642 SHIFTDAT 3.4 2006/01/19 12:22:05 642 642 CELLTM 1.3 2006/01/19 12:23:59 642 642 DELETE 6.3 2006/01/19 12:34:19 642 359 CALIB 11.7 2006/01/19 12:41:11 359 359 REMOVECH 7.0 2006/01/23 15:01:47 359 359 DERIVEDQ 3.5 2006/01/23 15:07:09 359 359 CLIP 1.3 2006/01/26 11:27:24 359 359 BINAVE 4.1 2006/01/26 13:47:52 359 155 CLIP 1.3 2006/01/30 09:37:39 155 154 REMOVECH 7.0 2006/01/30 09:54:30 154 154 HDREDIT2 2.5.1 2006/03/16 16:16:11 ? ? CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:19:06 154 154 $END $REMARKS -The following CHANNEL(S) were removed from file. Flag -The following CLIP parameters were used. Clip by Record Number Limits First Record,Last Record = 110, 751 Time Calculated from Start and Interval: Get Start Time from Header Get Time Increment from Header -REMOVECH 2006/01/16 11:55:48 The following CHANNEL(S) were removed: Scan_Number -The following FILTER parameters were used. Boxcar filter was used. Filter width = 5 The following channel(s) were filtered. Pressure -CALIB parameters: 2006/01/17 16:05:08 Calibration type = Raw Mode: ONLY - calibration specs from Cal File only. Calibration file = D:\9922\Cratio-mS-cm.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 3 Conductivity ratio 10 0.0000000E+00 0.2330240E-01 0.0000000E+00 0.0000000E+00 0.0000000E+00 -The following EXPFILT parameters were used: Channels to Filter: Conductivity Salinity will NOT be Recalculated after Filtering Sampling Interval: 0.500 Filter Time Response: 0.500 Calculated Filter Coeff a= 0.582 -The following FILTER parameters were used. Boxcar filter was used. Filter width = 3 The following channel(s) were filtered. Temperature -The following DERIVEQ parameters were used Reference channel for pressure is: Pressure Reference channel for temperature is: Temperature Reference channel for conductivity ratio is: Conductivity Reference channel for salinity is: Salinity Reference channel for oxygen is: Oxygen:Dissolved:SBE Computed properties Derived Properties Ref Press Temp Type Replace ------------------ --------- --------- ------- Salinity Insitu Insitu YES -The following SHIFT parameters were used. Shift Channel: Temperature # of Records to Advance (-ve for Delay): At REC# 0 Shift= 0.90 Salinity was recalculated after shift -The following CELLTM parameters were used. Value for alpha = 0.0180, Value for tau = 12.0000 Temperature channel: Temperature -The following DELETE parameters were used: Surface Record Removal: Off Pressure filtered over width: 5 Swells deleted. Warning message if pressure difference of 2.00 Drop rates < 0.30m/s (calculated over 5 points) will be deleted. Drop rate applies in the range 1.00 to 149.27 dbars Sample interval (from FILE section of header) = 0.500 seconds. -CALIB parameters: 2006/01/19 12:41:11 Calibration type = Correct Mode: UNION - calibration specs from Header and Cal File. Salinity is computed Calibration file = D:\9922\T-adj.CCF Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 2 Temperature C 10 0.1000000E-01 0.1000000E+01 Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 5 Salinity PSS-78 130 Pressure Temperature Conductivity -REMOVECH 2006/01/23 15:01:47 The following CHANNEL(S) were removed: Temperature [C] Descent_Rate [m/s] Salinity [PSS-78] -The following DERIVEQ parameters were used Reference channel for pressure is: Pressure Reference channel for temperature is: Temperature Reference channel for conductivity ratio is: Conductivity Reference channel for salinity is: Salinity Reference channel for oxygen is: Oxygen:Dissolved:SBE Computed properties Derived Properties Ref Press Temp Type Replace ------------------ --------- --------- ------- Salinity Insitu Insitu YES -The following CLIP parameters were used. Clip by Channel Range Clip Channel: Pressure Min,Max = 0.000, 4000.000 Time Calculated from Start and Interval: Get Start Time from Header Get Time Increment from Header -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 1.00 Minimum bin value = 0.000 Bin value was used Interpolated values were used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CLIP parameters were used. Clip by Channel Range Clip Channel: Pressure Min,Max = 1.000, 2000.000 Time Not Available in File -REMOVECH 2006/01/30 09:54:30 The following CHANNEL(S) were removed: Conductivity [ratio] -HEADER EDITS: 2006/03/16 16:16:11 Applied edit header: O:\Data Processing\Header Comments\Work\1999-22-CTD.TXT Channel 1: Pressure [dbar] Units: DBAR ==> dbar Format: F13.3 ==> F7.1 Channel 2: Temperature [DEG C (ITS90)] Format: F13.4 ==> F9.4 Channel 3: Salinity [PSS-78] Format: F13.4 ==> F9.4 Channel 4: Number_of_bin_records [n/a] Format: I13 ==> I3 $END *COMMENTS SBE HEADER Sea-Bird SBE 19 Data File: FileName = \9922-SBE\BS-4.HEX Software Version 4.234 Temperature SN = 1030 Conductivity SN = 1030 System UpLoad Time = Jul 15 1999 07:21:42 Ship: LAURIER Cruise: 9922 Station: BS-4 Latitude: 55 38.056 N Longitude: 168 34.916 W remarks: depth= 220 m ds SEACAT PROFILER V3.1b SN 1030 07/15/99 14:23:08.019 strain gauge pressure sensor: S/N = 189759, range = 5000 psia, tc = -221 clk = 32767.961 iop = 141 vmain = 12.0 vlith = 5.6 mode = PROFILE ncasts = 1 sample rate = 1 scan every 0.5 seconds minimum raw conductivity frequency for pump turn on = 2500 hertz pump delay = 40 seconds samples = 1154 free = 85593 lwait = 0 msec SW1 = 88 battery cutoff = 7.3 volts number of voltages sampled = 0 logdata = NO S> cast 0 07/15 14:03:48 samples 0 to 1153 sample rate = 1 scan every 0.5 sec onds stop = switch off # nquan = 6 # nvalues = 1154 # units = specified # name 0 = scan: Scan Count # name 1 = prSM: Pressure, Strain Gauge [db] # name 2 = t090C: Temperature [ITS-90, deg C] # name 3 = c0mS/cm: Conductivity [mS/cm] # name 4 = dz/dtM: Descent Rate [m/s] # name 5 = flag: 0.000e+00 # span 0 = 1, 1154 # span 1 = -9.980, 153.770 # span 2 = 3.4511, 7.7932 # span 3 = 0.082150, 33.994420 # span 4 = -1.350, 1.440 # span 5 = 0.0000e+00, 0.0000e+00 # interval = seconds: 0.5 # start_time = Jul 15 1999 14:03:48 # bad_flag = -9.990e-29 # sensor 0 = Frequency 0 temperature, 1030, 28Aug98 # sensor 1 = Frequency 1 conductivity, 1030, 28Aug98, cpcor = -9.5700e-08 # sensor 2 = Pressure Voltage, 189759, 26Aug98 # datcnv_date = Feb 18 2002 09:42:32, 5.2 # datcnv_in = D:\Data\9922-SBE\HeX\99220046.HEX D:\Data\9922-SBE\HeX\1030-98A.CO N # datcnv_skipover = 0 # file_type = ascii END* *CALIBRATION $TABLE: RAW CHANNELS ! Name Units Fmla Pad Coefficients ! -------------- ------- ---- ------ ------------ Conductivity ratio 10 -99 (0 0.233024E-01 0 0 0) $END $TABLE: CALCULATED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 130 -99 (Pressure Temperature Conductivity) () $END $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ------------- ----- ---- ------ ------------ Temperature C 10 -99 () (0.1E-01 1) $END !--1--- ---2---- ---3---- 4- !Pressu Temperat Salinity Nu !re ure mb ! ~c ! or ! ds !------ -------- -------- -- *END OF HEADER 1.0 7.7259 32.6543 5 2.0 7.7315 32.7522 3 3.0 7.7313 32.7520 3 4.0 7.7330 32.7520 2 5.0 7.7340 32.7521 2 6.0 7.7362 32.7517 2 7.0 7.7388 32.7521 2 8.0 7.7387 32.7534 3 9.0 7.7375 32.7530 3 10.0 7.7367 32.7550 2 11.0 7.7371 32.7550 2 12.0 7.7379 32.7550 2 13.0 7.7386 32.7550 2 14.0 7.7345 32.7570 2 15.0 7.7267 32.7566 2 16.0 7.7292 32.7582 2 17.0 7.7029 32.7582 3 18.0 7.6153 32.7582 2 19.0 7.5335 32.7672 2 20.0 7.4637 32.7719 2 21.0 7.3316 32.7881 2 22.0 7.1110 32.7915 2 23.0 6.9501 32.8020 3 24.0 6.8730 32.8077 2 25.0 6.7654 32.8158 3 26.0 6.7006 32.8232 1 27.0 6.6754 32.8249 2 28.0 6.6507 32.8350 2 29.0 6.5841 32.8457 3 30.0 6.4480 32.8495 2 31.0 6.3703 32.8644 2 32.0 6.2854 32.8729 2 33.0 6.1937 32.8784 2 34.0 6.1446 32.8864 2 35.0 6.1196 32.8942 2 36.0 5.9999 32.9108 3 37.0 5.8779 32.9251 2 38.0 5.8094 32.9348 2 39.0 5.7147 32.9457 2 40.0 5.6007 32.9504 2 41.0 5.5069 32.9709 2 42.0 5.4328 32.9877 2 43.0 5.3889 32.9960 3 44.0 5.3685 32.9983 2 45.0 5.3356 33.0009 3 46.0 5.3078 33.0116 2 47.0 5.2875 33.0239 2 48.0 5.2680 33.0241 2 49.0 5.2582 33.0244 3 50.0 5.2242 33.0241 2 51.0 5.1226 33.0230 2 52.0 5.0345 33.0294 2 53.0 4.9906 33.0312 2 54.0 4.9490 33.0331 2 55.0 4.9156 33.0456 2 56.0 4.8892 33.0508 2 57.0 4.8596 33.0595 3 58.0 4.8102 33.0705 3 59.0 4.7792 33.0758 2 60.0 4.7501 33.0835 2 61.0 4.7331 33.1226 2 62.0 4.7530 33.1282 2 63.0 4.7925 33.1354 2 64.0 4.8685 33.1774 3 65.0 4.8845 33.1960 2 66.0 4.8230 33.1976 2 67.0 4.7564 33.1948 2 68.0 4.7031 33.1979 2 69.0 4.6806 33.1976 2 70.0 4.6916 33.1976 2 71.0 4.7018 33.1997 3 72.0 4.7091 33.2001 2 73.0 4.7162 33.2018 2 74.0 4.7236 33.2040 2 75.0 4.7273 33.2069 3 76.0 4.7280 33.2089 2 77.0 4.7203 33.2123 2 78.0 4.6971 33.2135 2 79.0 4.6683 33.2147 2 80.0 4.6446 33.2151 3 81.0 4.5815 33.2132 2 82.0 4.5239 33.2104 2 83.0 4.4762 33.2102 2 84.0 4.4242 33.2099 2 85.0 4.3633 33.1983 2 86.0 4.3287 33.1968 3 87.0 4.2356 33.1852 2 88.0 4.1006 33.1815 2 89.0 3.9855 33.1692 2 90.0 3.9185 33.1676 2 91.0 3.8709 33.1565 2 92.0 3.8447 33.1610 2 93.0 3.8003 33.1530 2 94.0 3.7654 33.1544 2 95.0 3.7297 33.1513 3 96.0 3.6901 33.1533 2 97.0 3.6547 33.1507 2 98.0 3.6220 33.1521 2 99.0 3.6035 33.1576 2 100.0 3.5898 33.1611 3 101.0 3.5536 33.1555 2 102.0 3.5437 33.1651 2 103.0 3.5348 33.1655 2 104.0 3.5058 33.1638 3 105.0 3.4852 33.1723 2 106.0 3.4786 33.1792 1 107.0 3.4736 33.1905 2 108.0 3.4686 33.2006 2 109.0 3.4673 33.2075 2 110.0 3.4663 33.2105 3 111.0 3.4647 33.2137 2 112.0 3.4643 33.2137 2 113.0 3.4643 33.2175 2 114.0 3.4642 33.2215 2 115.0 3.4637 33.2229 2 116.0 3.4636 33.2241 2 117.0 3.4634 33.2251 2 118.0 3.4628 33.2248 3 119.0 3.4633 33.2246 2 120.0 3.4632 33.2238 2 121.0 3.4626 33.2245 2 122.0 3.4615 33.2254 2 123.0 3.4614 33.2281 2 124.0 3.4577 33.2305 2 125.0 3.4563 33.2322 2 126.0 3.4602 33.2305 2 127.0 3.4606 33.2286 2 128.0 3.4601 33.2279 2 129.0 3.4596 33.2281 2 130.0 3.4594 33.2278 3 131.0 3.4590 33.2276 2 132.0 3.4592 33.2272 2 133.0 3.4597 33.2267 2 134.0 3.4588 33.2280 2 135.0 3.4568 33.2314 2 136.0 3.4555 33.2335 2 137.0 3.4543 33.2354 3 138.0 3.4541 33.2350 2 139.0 3.4538 33.2354 2 140.0 3.4533 33.2363 2 141.0 3.4529 33.2367 2 142.0 3.4531 33.2388 2 143.0 3.4548 33.2411 3 144.0 3.4605 33.2506 2 145.0 3.4634 33.2565 2 146.0 3.4644 33.2577 2 147.0 3.4665 33.2588 2 148.0 3.4699 33.2653 2 149.0 3.4725 33.2674 2 150.0 3.4737 33.2669 3 151.0 3.4731 33.2694 2 152.0 3.4743 33.2691 3 153.0 3.4751 33.2698 3 154.0 3.4768 33.2469 15