*2013/12/16 15:19:05.28 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : UTC 1999/07/12 09:37:21.500 END TIME : UTC 1999/07/12 09:39:34.500 TIME INCREMENT : 0 0 0 0.5 0 ! (day hr min sec ms) NUMBER OF RECORDS : 126 DATA DESCRIPTION : CTD FILE TYPE : ASCII NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- --------------- -------------- -------------- 1 Pressure decibar 1 126 2 Temperature 'deg C (ITS90)' 5.5138 10.9822 3 Salinity PSS-78 32.0578 33.2228 4 Number_of_bin_records n/a 0 7 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -9.9 ' ' 7 F ' ' 1 2 -9.9 ' ' 9 F ' ' 4 3 ' ' ' ' 9 F ' ' 4 4 ' ' ' ' 3 I I 0 $END $REMARKS This file converted from Sea-Bird file: D:\Data\9922-SBE\Process\99220030.cnv $END *ADMINISTRATION MISSION : 1999-22 AGENCY : IOS, Ocean Physics Division, Sidney, B.C. COUNTRY : Canada PROJECT : Line P SCIENTIST : van Hardenberg B. PLATFORM : Sir Wilfrid Laurier *LOCATION GEOGRAPHIC AREA : Gulf of Alaska & Bering Sea STATION : KD-5 EVENT NUMBER : 30 LATITUDE : 57 8.06100 N ! (deg min) LONGITUDE : 151 21.06400 W ! (deg min) WATER DEPTH : 137 *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-19 SERIAL NUMBER : 1030 $TABLE: SENSORS ! Name Abs Depth Serial No ! ---- -------------- ---------- ' ' ' ' ' ' $END $REMARKS SOFTWARE VERSION 4.234 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- SBE_IOS 2.0 2002/02/18 13:28:13 679 679 REMOVECH 6.0 2002/02/18 19:32:37 679 679 CLIP 1.3 2006/01/13 09:22:24 401 357 REMOVECH 7.0 2006/01/16 11:55:43 357 357 FILTERS 4.3 2006/01/17 10:47:44 357 357 CALIB 11.7 2006/01/17 16:05:04 357 357 EXPFILT 1.1 2006/01/19 09:35:01 357 357 FILTERS 4.3 2006/01/19 09:39:37 357 357 DERIVEDQ 3.5 2006/01/19 11:53:59 357 357 SHIFTDAT 3.4 2006/01/19 12:22:02 357 357 CELLTM 1.3 2006/01/19 12:23:56 357 357 DELETE 6.3 2006/01/19 12:34:17 357 271 CALIB 11.7 2006/01/19 12:41:09 271 271 REMOVECH 7.0 2006/01/23 15:01:45 271 271 DERIVEDQ 3.5 2006/01/23 15:07:07 271 271 CLIP 1.3 2006/01/26 11:27:22 271 267 BINAVE 4.1 2006/01/26 13:47:49 267 127 CLIP 1.3 2006/01/30 09:37:37 127 126 REMOVECH 7.0 2006/01/30 09:54:28 126 126 HDREDIT2 2.5.1 2006/03/16 16:16:08 ? ? CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:19:05 126 126 $END $REMARKS -The following CHANNEL(S) were removed from file. Flag -The following CLIP parameters were used. Clip by Record Number Limits First Record,Last Record = 44, 400 Time Calculated from Start and Interval: Get Start Time from Header Get Time Increment from Header -REMOVECH 2006/01/16 11:55:43 The following CHANNEL(S) were removed: Scan_Number -The following FILTER parameters were used. Boxcar filter was used. Filter width = 5 The following channel(s) were filtered. Pressure -CALIB parameters: 2006/01/17 16:05:04 Calibration type = Raw Mode: ONLY - calibration specs from Cal File only. Calibration file = D:\9922\Cratio-mS-cm.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 3 Conductivity ratio 10 0.0000000E+00 0.2330240E-01 0.0000000E+00 0.0000000E+00 0.0000000E+00 -The following EXPFILT parameters were used: Channels to Filter: Conductivity Salinity will NOT be Recalculated after Filtering Sampling Interval: 0.500 Filter Time Response: 0.500 Calculated Filter Coeff a= 0.582 -The following FILTER parameters were used. Boxcar filter was used. Filter width = 3 The following channel(s) were filtered. Temperature -The following DERIVEQ parameters were used Reference channel for pressure is: Pressure Reference channel for temperature is: Temperature Reference channel for conductivity ratio is: Conductivity Reference channel for salinity is: Salinity Reference channel for oxygen is: Oxygen:Dissolved:SBE Computed properties Derived Properties Ref Press Temp Type Replace ------------------ --------- --------- ------- Salinity Insitu Insitu YES -The following SHIFT parameters were used. Shift Channel: Temperature # of Records to Advance (-ve for Delay): At REC# 0 Shift= 0.90 Salinity was recalculated after shift -The following CELLTM parameters were used. Value for alpha = 0.0180, Value for tau = 12.0000 Temperature channel: Temperature -The following DELETE parameters were used: Surface Record Removal: Off Pressure filtered over width: 5 Swells deleted. Warning message if pressure difference of 2.00 Drop rates < 0.30m/s (calculated over 5 points) will be deleted. Drop rate applies in the range 1.00 to 120.85 dbars Sample interval (from FILE section of header) = 0.500 seconds. -CALIB parameters: 2006/01/19 12:41:09 Calibration type = Correct Mode: UNION - calibration specs from Header and Cal File. Salinity is computed Calibration file = D:\9922\T-adj.CCF Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 2 Temperature C 10 0.1000000E-01 0.1000000E+01 Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 5 Salinity PSS-78 130 Pressure Temperature Conductivity -REMOVECH 2006/01/23 15:01:45 The following CHANNEL(S) were removed: Temperature [C] Descent_Rate [m/s] Salinity [PSS-78] -The following DERIVEQ parameters were used Reference channel for pressure is: Pressure Reference channel for temperature is: Temperature Reference channel for conductivity ratio is: Conductivity Reference channel for salinity is: Salinity Reference channel for oxygen is: Oxygen:Dissolved:SBE Computed properties Derived Properties Ref Press Temp Type Replace ------------------ --------- --------- ------- Salinity Insitu Insitu YES -The following CLIP parameters were used. Clip by Channel Range Clip Channel: Pressure Min,Max = 0.000, 4000.000 Time Calculated from Start and Interval: Get Start Time from Header Get Time Increment from Header -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 1.00 Minimum bin value = 0.000 Bin value was used Interpolated values were used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CLIP parameters were used. Clip by Channel Range Clip Channel: Pressure Min,Max = 1.000, 2000.000 Time Not Available in File -REMOVECH 2006/01/30 09:54:28 The following CHANNEL(S) were removed: Conductivity [ratio] -HEADER EDITS: 2006/03/16 16:16:08 Applied edit header: O:\Data Processing\Header Comments\Work\1999-22-CTD.TXT Channel 1: Pressure [dbar] Units: DBAR ==> dbar Format: F13.3 ==> F7.1 Channel 2: Temperature [DEG C (ITS90)] Format: F13.4 ==> F9.4 Channel 3: Salinity [PSS-78] Format: F13.4 ==> F9.4 Channel 4: Number_of_bin_records [n/a] Format: I13 ==> I3 $END *COMMENTS SBE HEADER Sea-Bird SBE 19 Data File: FileName = \9922-SBE\kd-5.HEX Software Version 4.234 Temperature SN = 1030 Conductivity SN = 1030 System UpLoad Time = Jul 12 1999 09:46:33 Ship: LAURIER Cruise: 9922 Station: KD-5 Latitude: 57 08.061N Longitude: 151 21.064W remarks: Depth 137m ds SEACAT PROFILER V3.1b SN 1030 07/12/99 09:47:58.032 strain gauge pressure sensor: S/N = 189759, range = 5000 psia, tc = -221 clk = 32768.070 iop = 137 vmain = 11.3 vlith = 5.7 mode = PROFILE ncasts = 1 sample rate = 1 scan every 0.5 seconds minimum raw conductivity frequency for pump turn on = 2500 hertz pump delay = 40 seconds samples = 679 free = 86068 lwait = 0 msec SW1 = 88 battery cutoff = 7.3 volts number of voltages sampled = 0 logdata = NO S> cast 0 07/12 09:36:58 samples 0 to 678 sample rate = 1 scan every 0.5 seco nds stop = switch off # nquan = 6 # nvalues = 679 # units = specified # name 0 = scan: Scan Count # name 1 = prSM: Pressure, Strain Gauge [db] # name 2 = t090C: Temperature [ITS-90, deg C] # name 3 = c0mS/cm: Conductivity [mS/cm] # name 4 = dz/dtM: Descent Rate [m/s] # name 5 = flag: 0.000e+00 # span 0 = 1, 679 # span 1 = -11.330, 124.530 # span 2 = 5.5113, 14.8915 # span 3 = 0.301794, 36.346902 # span 4 = -1.620, 1.530 # span 5 = 0.0000e+00, 0.0000e+00 # interval = seconds: 0.5 # start_time = Jul 12 1999 09:36:58 # bad_flag = -9.990e-29 # sensor 0 = Frequency 0 temperature, 1030, 28Aug98 # sensor 1 = Frequency 1 conductivity, 1030, 28Aug98, cpcor = -9.5700e-08 # sensor 2 = Pressure Voltage, 189759, 26Aug98 # datcnv_date = Feb 18 2002 09:42:25, 5.2 # datcnv_in = D:\Data\9922-SBE\HeX\99220030.HEX D:\Data\9922-SBE\HeX\1030-98A.CO N # datcnv_skipover = 0 # file_type = ascii END* *CALIBRATION $TABLE: RAW CHANNELS ! Name Units Fmla Pad Coefficients ! -------------- ------- ---- ------ ------------ Conductivity ratio 10 -99 (0 0.233024E-01 0 0 0) $END $TABLE: CALCULATED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 130 -99 (Pressure Temperature Conductivity) () $END $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ------------- ----- ---- ------ ------------ Temperature C 10 -99 () (0.1E-01 1) $END !--1--- ---2---- ---3---- 4- !Pressu Temperat Salinity Nu !re ure mb ! ~c ! or ! ds !------ -------- -------- -- *END OF HEADER 1.0 10.9822 32.0578 6 2.0 10.8703 32.1616 0 3.0 10.7585 32.2653 3 4.0 10.6455 32.2747 2 5.0 10.5867 32.2757 4 6.0 10.4412 32.2945 2 7.0 10.3231 32.3124 2 8.0 10.2431 32.3257 2 9.0 10.0950 32.3533 2 10.0 9.7378 32.3652 2 11.0 9.3872 32.4129 2 12.0 9.1080 32.4216 2 13.0 8.8736 32.4393 2 14.0 8.7293 32.4468 2 15.0 8.6311 32.4554 2 16.0 8.5648 32.4637 2 17.0 8.4833 32.4637 2 18.0 8.4183 32.4639 2 19.0 8.3947 32.4655 2 20.0 8.3839 32.4668 2 21.0 8.3686 32.4694 3 22.0 8.3123 32.4693 2 23.0 8.2605 32.4707 1 24.0 8.2085 32.4729 2 25.0 8.1399 32.4814 2 26.0 8.0539 32.4968 2 27.0 7.9615 32.5024 1 28.0 7.8047 32.5131 2 29.0 7.6049 32.5098 2 30.0 7.4761 32.5216 3 31.0 7.4030 32.5221 2 32.0 7.3672 32.5260 2 33.0 7.3245 32.5264 2 34.0 7.2948 32.5287 2 35.0 7.2881 32.5307 1 36.0 7.2843 32.5320 2 37.0 7.2691 32.5335 2 38.0 7.2437 32.5385 2 39.0 7.2200 32.5379 2 40.0 7.2048 32.5396 3 41.0 7.1894 32.5429 1 42.0 7.1146 32.5475 2 43.0 6.9756 32.5555 2 44.0 6.9050 32.5627 2 45.0 6.8717 32.5681 2 46.0 6.8404 32.5704 1 47.0 6.7918 32.5798 3 48.0 6.7277 32.5884 3 49.0 6.6343 32.5905 2 50.0 6.5677 32.5937 1 51.0 6.5339 32.6045 2 52.0 6.5163 32.6063 1 53.0 6.5036 32.6086 2 54.0 6.4882 32.6107 2 55.0 6.4686 32.6122 2 56.0 6.4028 32.6301 2 57.0 6.2653 32.6371 2 58.0 6.1816 32.6566 2 59.0 6.1475 32.6651 2 60.0 6.1309 32.6685 2 61.0 6.1115 32.6787 2 62.0 6.0905 32.6884 1 63.0 6.0690 32.7013 2 64.0 6.0323 32.7234 2 65.0 6.0058 32.7401 1 66.0 5.9951 32.7477 2 67.0 5.9903 32.7508 3 68.0 5.9863 32.7533 2 69.0 5.9815 32.7571 2 70.0 5.9772 32.7598 2 71.0 5.9753 32.7600 1 72.0 5.9708 32.7631 2 73.0 5.9626 32.7680 2 74.0 5.9517 32.7733 1 75.0 5.9371 32.7799 3 76.0 5.9324 32.7823 2 77.0 5.9291 32.7845 2 78.0 5.9146 32.7902 2 79.0 5.9000 32.7959 1 80.0 5.8896 32.8004 2 81.0 5.8824 32.8045 2 82.0 5.8800 32.8046 2 83.0 5.8781 32.8047 1 84.0 5.8755 32.8063 2 85.0 5.8696 32.8079 2 86.0 5.8542 32.8140 3 87.0 5.8338 32.8179 2 88.0 5.8259 32.8195 2 89.0 5.8231 32.8221 2 90.0 5.8190 32.8280 2 91.0 5.8172 32.8289 1 92.0 5.8169 32.8297 2 93.0 5.8166 32.8308 2 94.0 5.8147 32.8322 2 95.0 5.8120 32.8391 1 96.0 5.8102 32.8419 2 97.0 5.8087 32.8438 2 98.0 5.8055 32.8467 2 99.0 5.8037 32.8489 3 100.0 5.8026 32.8501 2 101.0 5.8014 32.8511 2 102.0 5.7929 32.8600 2 103.0 5.7737 32.8699 2 104.0 5.7549 32.8837 2 105.0 5.7437 32.8948 2 106.0 5.7392 32.8993 2 107.0 5.7375 32.9000 1 108.0 5.7363 32.9006 2 109.0 5.7351 32.9011 2 110.0 5.7344 32.9008 2 111.0 5.7326 32.9023 1 112.0 5.7298 32.9037 2 113.0 5.7238 32.9073 3 114.0 5.7202 32.9100 2 115.0 5.7187 32.9109 2 116.0 5.7160 32.9132 2 117.0 5.7082 32.9212 2 118.0 5.6949 32.9350 2 119.0 5.6618 32.9681 2 120.0 5.6209 32.9976 2 121.0 5.5947 33.0176 3 122.0 5.5643 33.0559 4 123.0 5.5375 33.1072 3 124.0 5.5246 33.1494 3 125.0 5.5176 33.2034 7 126.0 5.5138 33.2228 3