*2013/12/16 15:19:05.17 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : UTC 1999/07/12 05:42:42.000 END TIME : UTC 1999/07/12 05:43:44.000 TIME INCREMENT : 0 0 0 0.5 0 ! (day hr min sec ms) NUMBER OF RECORDS : 48 DATA DESCRIPTION : CTD FILE TYPE : ASCII NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- --------------- -------------- -------------- 1 Pressure decibar 1 48 2 Temperature 'deg C (ITS90)' 7.1917 9.324 3 Salinity PSS-78 15.7831 32.3271 4 Number_of_bin_records n/a 2 5 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -9.9 ' ' 7 F ' ' 1 2 -9.9 ' ' 9 F ' ' 4 3 ' ' ' ' 9 F ' ' 4 4 ' ' ' ' 3 I I 0 $END $REMARKS This file converted from Sea-Bird file: D:\Data\9922-SBE\Process\99220026.cnv $END *ADMINISTRATION MISSION : 1999-22 AGENCY : IOS, Ocean Physics Division, Sidney, B.C. COUNTRY : Canada PROJECT : Line P SCIENTIST : van Hardenberg B. PLATFORM : Sir Wilfrid Laurier *LOCATION GEOGRAPHIC AREA : Gulf of Alaska & Bering Sea STATION : KD-1 EVENT NUMBER : 26 LATITUDE : 57 30.09700 N ! (deg min) LONGITUDE : 152 0.01400 W ! (deg min) WATER DEPTH : 56 *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-19 SERIAL NUMBER : 1030 $TABLE: SENSORS ! Name Abs Depth Serial No ! ---- -------------- ---------- ' ' ' ' ' ' $END $REMARKS SOFTWARE VERSION 4.234 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- SBE_IOS 2.0 2002/02/18 13:28:11 550 550 REMOVECH 6.0 2002/02/18 19:32:35 550 550 CLIP 1.3 2006/01/13 09:24:08 385 356 REMOVECH 7.0 2006/01/16 11:55:43 356 356 FILTERS 4.3 2006/01/17 10:47:44 356 356 CALIB 11.7 2006/01/17 16:05:04 356 356 EXPFILT 1.1 2006/01/19 09:35:01 356 356 FILTERS 4.3 2006/01/19 09:39:36 356 356 DERIVEDQ 3.5 2006/01/19 11:53:58 356 356 SHIFTDAT 3.4 2006/01/19 12:22:02 356 356 CELLTM 1.3 2006/01/19 12:23:56 356 356 DELETE 6.3 2006/01/19 12:34:17 356 125 CALIB 11.7 2006/01/19 12:41:09 125 125 REMOVECH 7.0 2006/01/23 15:01:44 125 125 DERIVEDQ 3.5 2006/01/23 15:07:07 125 125 CLIP 1.3 2006/01/26 11:27:22 125 125 BINAVE 4.1 2006/01/26 13:47:49 125 49 CLIP 1.3 2006/01/30 09:37:37 49 48 REMOVECH 7.0 2006/01/30 09:54:28 48 48 HDREDIT2 2.5.1 2006/03/16 16:16:08 ? ? CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:19:05 48 48 $END $REMARKS -The following CHANNEL(S) were removed from file. Flag -The following CLIP parameters were used. Clip by Record Number Limits First Record,Last Record = 29, 384 Time Calculated from Start and Interval: Get Start Time from Header Get Time Increment from Header -REMOVECH 2006/01/16 11:55:43 The following CHANNEL(S) were removed: Scan_Number -The following FILTER parameters were used. Boxcar filter was used. Filter width = 5 The following channel(s) were filtered. Pressure -CALIB parameters: 2006/01/17 16:05:04 Calibration type = Raw Mode: ONLY - calibration specs from Cal File only. Calibration file = D:\9922\Cratio-mS-cm.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 3 Conductivity ratio 10 0.0000000E+00 0.2330240E-01 0.0000000E+00 0.0000000E+00 0.0000000E+00 -The following EXPFILT parameters were used: Channels to Filter: Conductivity Salinity will NOT be Recalculated after Filtering Sampling Interval: 0.500 Filter Time Response: 0.500 Calculated Filter Coeff a= 0.582 -The following FILTER parameters were used. Boxcar filter was used. Filter width = 3 The following channel(s) were filtered. Temperature -The following DERIVEQ parameters were used Reference channel for pressure is: Pressure Reference channel for temperature is: Temperature Reference channel for conductivity ratio is: Conductivity Reference channel for salinity is: Salinity Reference channel for oxygen is: Oxygen:Dissolved:SBE Computed properties Derived Properties Ref Press Temp Type Replace ------------------ --------- --------- ------- Salinity Insitu Insitu YES -The following SHIFT parameters were used. Shift Channel: Temperature # of Records to Advance (-ve for Delay): At REC# 0 Shift= 0.90 Salinity was recalculated after shift -The following CELLTM parameters were used. Value for alpha = 0.0180, Value for tau = 12.0000 Temperature channel: Temperature -The following DELETE parameters were used: Surface Record Removal: Off Pressure filtered over width: 5 Swells deleted. Warning message if pressure difference of 2.00 Drop rates < 0.30m/s (calculated over 5 points) will be deleted. Drop rate applies in the range 1.00 to 43.58 dbars Sample interval (from FILE section of header) = 0.500 seconds. -CALIB parameters: 2006/01/19 12:41:09 Calibration type = Correct Mode: UNION - calibration specs from Header and Cal File. Salinity is computed Calibration file = D:\9922\T-adj.CCF Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 2 Temperature C 10 0.1000000E-01 0.1000000E+01 Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 5 Salinity PSS-78 130 Pressure Temperature Conductivity -REMOVECH 2006/01/23 15:01:44 The following CHANNEL(S) were removed: Temperature [C] Descent_Rate [m/s] Salinity [PSS-78] -The following DERIVEQ parameters were used Reference channel for pressure is: Pressure Reference channel for temperature is: Temperature Reference channel for conductivity ratio is: Conductivity Reference channel for salinity is: Salinity Reference channel for oxygen is: Oxygen:Dissolved:SBE Computed properties Derived Properties Ref Press Temp Type Replace ------------------ --------- --------- ------- Salinity Insitu Insitu YES -The following CLIP parameters were used. Clip by Channel Range Clip Channel: Pressure Min,Max = 0.000, 4000.000 Time Calculated from Start and Interval: Get Start Time from Header Get Time Increment from Header -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 1.00 Minimum bin value = 0.000 Bin value was used Interpolated values were used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CLIP parameters were used. Clip by Channel Range Clip Channel: Pressure Min,Max = 1.000, 2000.000 Time Not Available in File -REMOVECH 2006/01/30 09:54:28 The following CHANNEL(S) were removed: Conductivity [ratio] -HEADER EDITS: 2006/03/16 16:16:08 Applied edit header: O:\Data Processing\Header Comments\Work\1999-22-CTD.TXT Channel 1: Pressure [dbar] Units: DBAR ==> dbar Format: F13.3 ==> F7.1 Channel 2: Temperature [DEG C (ITS90)] Format: F13.4 ==> F9.4 Channel 3: Salinity [PSS-78] Format: F13.4 ==> F9.4 Channel 4: Number_of_bin_records [n/a] Format: I13 ==> I3 $END *COMMENTS SBE HEADER Sea-Bird SBE 19 Data File: FileName = \9922-SBE\kd-1.HEX Software Version 4.234 Temperature SN = 1030 Conductivity SN = 1030 System UpLoad Time = Jul 12 1999 05:56:17 Ship: LAURIER Cruise: 9922 Station: KD-1 Latitude: 57 30.097 N Longitude: 152 0.014 W remarks: Depth=56m ds SEACAT PROFILER V3.1b SN 1030 07/12/99 05:57:42.402 strain gauge pressure sensor: S/N = 189759, range = 5000 psia, tc = -221 clk = 32768.078 iop = 136 vmain = 11.4 vlith = 5.7 mode = PROFILE ncasts = 1 sample rate = 1 scan every 0.5 seconds minimum raw conductivity frequency for pump turn on = 2500 hertz pump delay = 40 seconds samples = 550 free = 86197 lwait = 0 msec SW1 = 88 battery cutoff = 7.3 volts number of voltages sampled = 0 logdata = NO S> cast 0 07/12 05:42:28 samples 0 to 549 sample rate = 1 scan every 0.5 seco nds stop = switch off # nquan = 6 # nvalues = 550 # units = specified # name 0 = scan: Scan Count # name 1 = prSM: Pressure, Strain Gauge [db] # name 2 = t090C: Temperature [ITS-90, deg C] # name 3 = c0mS/cm: Conductivity [mS/cm] # name 4 = dz/dtM: Descent Rate [m/s] # name 5 = flag: 0.000e+00 # span 0 = 1, 550 # span 1 = -13.579, 45.354 # span 2 = 7.1582, 10.6150 # span 3 = 0.325566, 34.251217 # span 4 = -1.260, 1.260 # span 5 = 0.0000e+00, 0.0000e+00 # interval = seconds: 0.5 # start_time = Jul 12 1999 05:42:28 # bad_flag = -9.990e-29 # sensor 0 = Frequency 0 temperature, 1030, 28Aug98 # sensor 1 = Frequency 1 conductivity, 1030, 28Aug98, cpcor = -9.5700e-08 # sensor 2 = Pressure Voltage, 189759, 26Aug98 # datcnv_date = Feb 18 2002 09:42:24, 5.2 # datcnv_in = D:\Data\9922-SBE\HeX\99220026.HEX D:\Data\9922-SBE\HeX\1030-98A.CO N # datcnv_skipover = 0 # file_type = ascii END* *CALIBRATION $TABLE: RAW CHANNELS ! Name Units Fmla Pad Coefficients ! -------------- ------- ---- ------ ------------ Conductivity ratio 10 -99 (0 0.233024E-01 0 0 0) $END $TABLE: CALCULATED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 130 -99 (Pressure Temperature Conductivity) () $END $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ------------- ----- ---- ------ ------------ Temperature C 10 -99 () (0.1E-01 1) $END !--1--- ---2---- ---3---- 4- !Pressu Temperat Salinity Nu !re ure mb ! ~c ! or ! ds !------ -------- -------- -- *END OF HEADER 1.0 9.3240 15.7831 5 2.0 8.4160 32.0175 4 3.0 8.1853 32.1180 3 4.0 8.1025 32.1210 3 5.0 8.0008 32.1310 3 6.0 7.9654 32.1372 2 7.0 7.9575 32.1353 2 8.0 7.9508 32.1340 3 9.0 7.9419 32.1354 3 10.0 7.9325 32.1368 2 11.0 7.9268 32.1366 2 12.0 7.9200 32.1388 2 13.0 7.9076 32.1433 3 14.0 7.8925 32.1479 2 15.0 7.8736 32.1527 3 16.0 7.8583 32.1563 2 17.0 7.8519 32.1587 2 18.0 7.8471 32.1639 2 19.0 7.8336 32.1753 3 20.0 7.8252 32.1781 2 21.0 7.8233 32.1780 3 22.0 7.8208 32.1782 3 23.0 7.8161 32.1810 2 24.0 7.8115 32.1815 2 25.0 7.8084 32.1824 2 26.0 7.8052 32.1823 2 27.0 7.8043 32.1822 3 28.0 7.8033 32.1821 2 29.0 7.8005 32.1829 2 30.0 7.7979 32.1826 2 31.0 7.7966 32.1827 3 32.0 7.7901 32.1854 2 33.0 7.7774 32.1887 3 34.0 7.7593 32.1915 2 35.0 7.7448 32.1966 3 36.0 7.7250 32.2029 2 37.0 7.7050 32.2081 2 38.0 7.6889 32.2121 2 39.0 7.6698 32.2187 3 40.0 7.6426 32.2259 2 41.0 7.6306 32.2286 2 42.0 7.6263 32.2281 2 43.0 7.6258 32.2283 2 44.0 7.6233 32.2294 3 45.0 7.6171 32.2308 5 46.0 7.5265 32.2703 3 47.0 7.3024 32.3165 2 48.0 7.1917 32.3271 5