*2013/12/16 15:19:05.06 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : UTC 1999/07/09 21:12:39.000 END TIME : UTC 1999/07/09 21:14:50.000 TIME INCREMENT : 0 0 0 0.5 0 ! (day hr min sec ms) NUMBER OF RECORDS : 113 DATA DESCRIPTION : CTD FILE TYPE : ASCII NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- --------------- -------------- -------------- 1 Pressure decibar 1 113 2 Temperature 'deg C (ITS90)' 6.4919 11.426 3 Salinity PSS-78 30.0254 32.3196 4 Number_of_bin_records n/a 1 5 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -9.9 ' ' 7 F ' ' 1 2 -9.9 ' ' 9 F ' ' 4 3 ' ' ' ' 9 F ' ' 4 4 ' ' ' ' 3 I I 0 $END $REMARKS This file converted from Sea-Bird file: D:\Data\9922-SBE\Process\99220023.cnv $END *ADMINISTRATION MISSION : 1999-22 AGENCY : IOS, Ocean Physics Division, Sidney, B.C. COUNTRY : Canada PROJECT : Line P SCIENTIST : van Hardenberg B. PLATFORM : Sir Wilfrid Laurier *LOCATION GEOGRAPHIC AREA : Gulf of Alaska & Bering Sea STATION : SW-1 EVENT NUMBER : 23 LATITUDE : 59 50.07000 N ! (deg min) LONGITUDE : 148 59.19000 W ! (deg min) WATER DEPTH : 123 *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-19 SERIAL NUMBER : 1030 $TABLE: SENSORS ! Name Abs Depth Serial No ! ---- -------------- ---------- ' ' ' ' ' ' $END $REMARKS SOFTWARE VERSION 4.234 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- SBE_IOS 2.0 2002/02/18 13:28:09 815 815 REMOVECH 6.0 2002/02/18 19:32:33 815 815 CLIP 1.3 2006/01/13 09:25:28 537 362 REMOVECH 7.0 2006/01/16 11:55:42 362 362 FILTERS 4.3 2006/01/17 10:47:44 362 362 CALIB 11.7 2006/01/17 16:05:04 362 362 EXPFILT 1.1 2006/01/19 09:35:01 362 362 FILTERS 4.3 2006/01/19 09:39:36 362 362 DERIVEDQ 3.5 2006/01/19 11:53:58 362 362 SHIFTDAT 3.4 2006/01/19 12:22:02 362 362 CELLTM 1.3 2006/01/19 12:23:55 362 362 DELETE 6.3 2006/01/19 12:34:16 362 269 CALIB 11.7 2006/01/19 12:41:08 269 269 REMOVECH 7.0 2006/01/23 15:01:44 269 269 DERIVEDQ 3.5 2006/01/23 15:07:07 269 269 CLIP 1.3 2006/01/26 11:27:22 269 263 BINAVE 4.1 2006/01/26 13:47:49 263 114 CLIP 1.3 2006/01/30 09:37:37 114 113 REMOVECH 7.0 2006/01/30 09:54:28 113 113 HDREDIT2 2.5.1 2006/03/16 16:16:08 ? ? CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:19:05 113 113 $END $REMARKS -The following CHANNEL(S) were removed from file: Flag -Pressure was corrected using exponential fit to out-of-water data: Pcor(X)= Praw(X) -0.9 -9.9 *EXP( -0.0063 *X) where X=scan number -The following CLIP parameters were used. Clip by Record Number Limits First Record,Last Record = 175, 536 Time Calculated from Start and Interval: Get Start Time from Header Get Time Increment from Header -REMOVECH 2006/01/16 11:55:42 The following CHANNEL(S) were removed: Scan_Number -The following FILTER parameters were used. Boxcar filter was used. Filter width = 5 The following channel(s) were filtered. Pressure -CALIB parameters: 2006/01/17 16:05:04 Calibration type = Raw Mode: ONLY - calibration specs from Cal File only. Calibration file = D:\9922\Cratio-mS-cm.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 3 Conductivity ratio 10 0.0000000E+00 0.2330240E-01 0.0000000E+00 0.0000000E+00 0.0000000E+00 -The following EXPFILT parameters were used: Channels to Filter: Conductivity Salinity will NOT be Recalculated after Filtering Sampling Interval: 0.500 Filter Time Response: 0.500 Calculated Filter Coeff a= 0.582 -The following FILTER parameters were used. Boxcar filter was used. Filter width = 3 The following channel(s) were filtered. Temperature -The following DERIVEQ parameters were used Reference channel for pressure is: Pressure Reference channel for temperature is: Temperature Reference channel for conductivity ratio is: Conductivity Reference channel for salinity is: Salinity Reference channel for oxygen is: Oxygen:Dissolved:SBE Computed properties Derived Properties Ref Press Temp Type Replace ------------------ --------- --------- ------- Salinity Insitu Insitu YES -The following SHIFT parameters were used. Shift Channel: Temperature # of Records to Advance (-ve for Delay): At REC# 0 Shift= 0.90 Salinity was recalculated after shift -The following CELLTM parameters were used. Value for alpha = 0.0180, Value for tau = 12.0000 Temperature channel: Temperature -The following DELETE parameters were used: Surface Record Removal: Off Pressure filtered over width: 5 Swells deleted. Warning message if pressure difference of 2.00 Drop rates < 0.30m/s (calculated over 5 points) will be deleted. Drop rate applies in the range 1.00 to 107.91 dbars Sample interval (from FILE section of header) = 0.500 seconds. -CALIB parameters: 2006/01/19 12:41:08 Calibration type = Correct Mode: UNION - calibration specs from Header and Cal File. Salinity is computed Calibration file = D:\9922\T-adj.CCF Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 2 Temperature C 10 0.1000000E-01 0.1000000E+01 Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 5 Salinity PSS-78 130 Pressure Temperature Conductivity -REMOVECH 2006/01/23 15:01:44 The following CHANNEL(S) were removed: Temperature [C] Descent_Rate [m/s] Salinity [PSS-78] -The following DERIVEQ parameters were used Reference channel for pressure is: Pressure Reference channel for temperature is: Temperature Reference channel for conductivity ratio is: Conductivity Reference channel for salinity is: Salinity Reference channel for oxygen is: Oxygen:Dissolved:SBE Computed properties Derived Properties Ref Press Temp Type Replace ------------------ --------- --------- ------- Salinity Insitu Insitu YES -The following CLIP parameters were used. Clip by Channel Range Clip Channel: Pressure Min,Max = 0.000, 4000.000 Time Calculated from Start and Interval: Get Start Time from Header Get Time Increment from Header -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 1.00 Minimum bin value = 0.000 Bin value was used Interpolated values were used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CLIP parameters were used. Clip by Channel Range Clip Channel: Pressure Min,Max = 1.000, 2000.000 Time Not Available in File -REMOVECH 2006/01/30 09:54:28 The following CHANNEL(S) were removed: Conductivity [ratio] -HEADER EDITS: 2006/03/16 16:16:08 Applied edit header: O:\Data Processing\Header Comments\Work\1999-22-CTD.TXT Channel 1: Pressure [dbar] Units: DBAR ==> dbar Format: F13.3 ==> F7.1 Channel 2: Temperature [DEG C (ITS90)] Format: F13.4 ==> F9.4 Channel 3: Salinity [PSS-78] Format: F13.4 ==> F9.4 Channel 4: Number_of_bin_records [n/a] Format: I13 ==> I3 $END *COMMENTS SBE HEADER Sea-Bird SBE 19 Data File: FileName = \BON\9922-SBE\sw-100.HEX Software Version 4.234 Temperature SN = 1030 Conductivity SN = 1030 System UpLoad Time = Jul 09 1999 14:19:30 Ship: LAURIER Cruise: 9922 Station: SW-1 Latitude: 59 50.07 N Longitude: 148 59.19 W remarks: sounder 123m fewer waves, less wind ds SEACAT PROFILER V3.1b SN 1030 07/09/99 21:20:47.775 strain gauge pressure sensor: S/N = 189759, range = 5000 psia, tc = -221 clk = 32768.156 iop = 136 vmain = 11.0 vlith = 5.6 mode = PROFILE ncasts = 1 sample rate = 1 scan every 0.5 seconds minimum raw conductivity frequency for pump turn on = 2500 hertz pump delay = 40 seconds samples = 815 free = 85932 lwait = 0 msec SW1 = 88 battery cutoff = 7.3 volts number of voltages sampled = 0 logdata = NO S> cast 0 07/09 21:11:09 samples 0 to 814 sample rate = 1 scan every 0.5 seco nds stop = switch off # nquan = 6 # nvalues = 815 # units = specified # name 0 = scan: Scan Count # name 1 = prSM: Pressure, Strain Gauge [db] # name 2 = t090C: Temperature [ITS-90, deg C] # name 3 = c0mS/cm: Conductivity [mS/cm] # name 4 = dz/dtM: Descent Rate [m/s] # name 5 = flag: 0.000e+00 # span 0 = 1, 815 # span 1 = -10.880, 111.934 # span 2 = 6.4857, 12.8622 # span 3 = 0.087184, 35.272686 # span 4 = -1.799, 1.620 # span 5 = 0.0000e+00, 0.0000e+00 # interval = seconds: 0.5 # start_time = Jul 09 1999 21:11:09 # bad_flag = -9.990e-29 # sensor 0 = Frequency 0 temperature, 1030, 28Aug98 # sensor 1 = Frequency 1 conductivity, 1030, 28Aug98, cpcor = -9.5700e-08 # sensor 2 = Pressure Voltage, 189759, 26Aug98 # datcnv_date = Feb 18 2002 09:42:23, 5.2 # datcnv_in = D:\Data\9922-SBE\HeX\99220023.HEX D:\Data\9922-SBE\HeX\1030-98A.CO N # datcnv_skipover = 0 # file_type = ascii END* *CALIBRATION $TABLE: RAW CHANNELS ! Name Units Fmla Pad Coefficients ! -------------- ------- ---- ------ ------------ Conductivity ratio 10 -99 (0 0.233024E-01 0 0 0) $END $TABLE: CALCULATED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 130 -99 (Pressure Temperature Conductivity) () $END $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ------------- ----- ---- ------ ------------ Temperature C 10 -99 () (0.1E-01 1) $END !--1--- ---2---- ---3---- 4- !Pressu Temperat Salinity Nu !re ure mb ! ~c ! or ! ds !------ -------- -------- -- *END OF HEADER 1.0 11.4260 30.0254 4 2.0 11.3729 30.3344 2 3.0 11.3716 30.3329 4 4.0 11.3728 30.3306 3 5.0 11.3750 30.3304 3 6.0 11.3664 30.3352 2 7.0 11.3425 30.3510 2 8.0 11.3016 30.3876 2 9.0 11.2535 30.4342 3 10.0 11.2101 30.4781 2 11.0 11.1653 30.5217 3 12.0 11.1268 30.5581 3 13.0 11.1016 30.5795 2 14.0 11.0863 30.5921 1 15.0 11.0743 30.5993 2 16.0 11.0640 30.6063 2 17.0 11.0573 30.6104 3 18.0 11.0530 30.6106 3 19.0 11.0496 30.6137 2 20.0 11.0655 30.7466 2 21.0 11.0712 30.8887 1 22.0 11.0546 31.0207 2 23.0 11.0019 31.1232 2 24.0 10.9636 31.1404 4 25.0 10.9273 31.1601 2 26.0 10.8493 31.1887 2 27.0 10.7880 31.2500 2 28.0 10.6940 31.2932 1 29.0 10.5416 31.3431 2 30.0 10.3926 31.4263 3 31.0 10.3439 31.4704 4 32.0 10.3607 31.5082 2 33.0 10.3725 31.5383 1 34.0 10.3587 31.5566 2 35.0 10.2937 31.5797 2 36.0 10.2430 31.6055 2 37.0 10.3023 31.7501 2 38.0 10.3325 31.7872 3 39.0 10.3236 31.7983 2 40.0 10.3133 31.8126 3 41.0 10.1536 31.8228 2 42.0 9.6697 31.8281 2 43.0 9.2004 31.8347 2 44.0 8.8575 31.8275 2 45.0 8.6092 31.7965 3 46.0 8.4941 31.7868 3 47.0 8.3642 31.7956 2 48.0 8.2034 31.7940 1 49.0 7.9925 31.7418 2 50.0 7.8485 31.7302 1 51.0 7.7593 31.7370 3 52.0 7.6379 31.7471 3 53.0 7.3831 31.7541 3 54.0 7.1988 31.7569 2 55.0 7.2634 31.7594 2 56.0 7.3688 31.8342 2 57.0 7.3101 31.8467 2 58.0 7.2645 31.8827 2 59.0 7.3106 31.9093 2 60.0 7.3363 31.9367 3 61.0 7.2624 31.9464 3 62.0 7.1467 31.9480 2 63.0 7.1055 31.9523 2 64.0 7.0015 31.9480 1 65.0 6.8451 31.9410 2 66.0 6.6731 31.9222 3 67.0 6.5908 31.9178 3 68.0 6.5881 31.9242 2 69.0 6.6378 31.9356 2 70.0 6.6632 31.9424 2 71.0 6.6058 31.9421 2 72.0 6.5855 31.9480 2 73.0 6.6567 31.9707 3 74.0 6.7859 32.0061 3 75.0 6.8359 32.0237 2 76.0 6.7982 32.0321 2 77.0 6.8762 32.0648 2 78.0 6.9871 32.0898 2 79.0 7.0419 32.1057 3 80.0 7.0791 32.1153 2 81.0 7.1108 32.1273 2 82.0 7.1542 32.1431 2 83.0 7.1891 32.1621 2 84.0 7.1953 32.1651 2 85.0 7.1892 32.1684 3 86.0 7.1741 32.1696 2 87.0 7.1497 32.1787 2 88.0 7.0982 32.1751 2 89.0 7.0564 32.1804 2 90.0 7.0316 32.1855 3 91.0 7.0233 32.1915 2 92.0 7.0114 32.1986 2 93.0 6.9886 32.2083 2 94.0 6.9573 32.2242 2 95.0 6.9101 32.2347 3 96.0 6.8733 32.2366 3 97.0 6.8424 32.2348 2 98.0 6.8194 32.2380 1 99.0 6.8309 32.2578 2 100.0 6.8595 32.2811 2 101.0 6.8604 32.2876 3 102.0 6.8315 32.2947 3 103.0 6.7854 32.3011 3 104.0 6.7421 32.3053 2 105.0 6.7002 32.3083 2 106.0 6.6755 32.3117 1 107.0 6.6463 32.3103 4 108.0 6.6111 32.3142 3 109.0 6.5603 32.3117 2 110.0 6.5251 32.3133 1 111.0 6.5083 32.3196 2 112.0 6.4945 32.3177 3 113.0 6.4919 32.3180 5