*2013/12/16 15:19:04.93 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : UTC 1999/07/09 16:28:48.000 END TIME : UTC 1999/07/09 16:30:55.000 TIME INCREMENT : 0 0 0 0.5 0 ! (day hr min sec ms) NUMBER OF RECORDS : 100 DATA DESCRIPTION : CTD FILE TYPE : ASCII NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- --------------- -------------- -------------- 1 Pressure decibar 1 100 2 Temperature 'deg C (ITS90)' 5.95 10.289 3 Salinity PSS-78 27.7675 32.7812 4 Number_of_bin_records n/a 1 5 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -9.9 ' ' 7 F ' ' 1 2 -9.9 ' ' 9 F ' ' 4 3 ' ' ' ' 9 F ' ' 4 4 ' ' ' ' 3 I I 0 $END $REMARKS This file converted from Sea-Bird file: D:\Data\9922-SBE\Process\99220019.cnv $END *ADMINISTRATION MISSION : 1999-22 AGENCY : IOS, Ocean Physics Division, Sidney, B.C. COUNTRY : Canada PROJECT : Line P SCIENTIST : van Hardenberg B. PLATFORM : Sir Wilfrid Laurier *LOCATION GEOGRAPHIC AREA : Gulf of Alaska & Bering Sea STATION : SW-5 EVENT NUMBER : 19 LATITUDE : 59 16.54000 N ! (deg min) LONGITUDE : 148 17.69000 W ! (deg min) WATER DEPTH : 110 *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-19 SERIAL NUMBER : 1030 $TABLE: SENSORS ! Name Abs Depth Serial No ! ---- -------------- ---------- ' ' ' ' ' ' $END $REMARKS SOFTWARE VERSION 4.234 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- SBE_IOS 2.0 2002/02/18 13:28:06 655 655 REMOVECH 6.0 2002/02/18 19:32:31 655 655 CLIP 1.3 2006/01/13 09:27:08 384 357 REMOVECH 7.0 2006/01/16 11:55:42 357 357 FILTERS 4.3 2006/01/17 10:47:43 357 357 CALIB 11.7 2006/01/17 16:05:03 357 357 EXPFILT 1.1 2006/01/19 09:35:01 357 357 FILTERS 4.3 2006/01/19 09:39:36 357 357 DERIVEDQ 3.5 2006/01/19 11:53:58 357 357 SHIFTDAT 3.4 2006/01/19 12:22:02 357 357 CELLTM 1.3 2006/01/19 12:23:55 357 357 DELETE 6.3 2006/01/19 12:34:16 357 261 CALIB 11.7 2006/01/19 12:41:08 261 261 REMOVECH 7.0 2006/01/23 15:01:44 261 261 DERIVEDQ 3.5 2006/01/23 15:07:06 261 261 CLIP 1.3 2006/01/26 11:27:22 261 255 BINAVE 4.1 2006/01/26 13:47:49 255 101 CLIP 1.3 2006/01/30 09:37:37 101 100 REMOVECH 7.0 2006/01/30 09:54:28 100 100 HDREDIT2 2.5.1 2006/03/16 16:16:08 ? ? CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:19:04 100 100 $END $REMARKS -The following CHANNEL(S) were removed from file: Flag -Pressure was corrected using exponential fit to out-of-water data: Pcor(X)= Praw(X) -0.8 -10.4 *exp( -.007 *X) where X=scan number -The following CLIP parameters were used. Clip by Record Number Limits First Record,Last Record = 27, 383 Time Calculated from Start and Interval: Get Start Time from Header Get Time Increment from Header -REMOVECH 2006/01/16 11:55:42 The following CHANNEL(S) were removed: Scan_Number -The following FILTER parameters were used. Boxcar filter was used. Filter width = 5 The following channel(s) were filtered. Pressure -CALIB parameters: 2006/01/17 16:05:03 Calibration type = Raw Mode: ONLY - calibration specs from Cal File only. Calibration file = D:\9922\Cratio-mS-cm.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 3 Conductivity ratio 10 0.0000000E+00 0.2330240E-01 0.0000000E+00 0.0000000E+00 0.0000000E+00 -The following EXPFILT parameters were used: Channels to Filter: Conductivity Salinity will NOT be Recalculated after Filtering Sampling Interval: 0.500 Filter Time Response: 0.500 Calculated Filter Coeff a= 0.582 -The following FILTER parameters were used. Boxcar filter was used. Filter width = 3 The following channel(s) were filtered. Temperature -The following DERIVEQ parameters were used Reference channel for pressure is: Pressure Reference channel for temperature is: Temperature Reference channel for conductivity ratio is: Conductivity Reference channel for salinity is: Salinity Reference channel for oxygen is: Oxygen:Dissolved:SBE Computed properties Derived Properties Ref Press Temp Type Replace ------------------ --------- --------- ------- Salinity Insitu Insitu YES -The following SHIFT parameters were used. Shift Channel: Temperature # of Records to Advance (-ve for Delay): At REC# 0 Shift= 0.90 Salinity was recalculated after shift -The following CELLTM parameters were used. Value for alpha = 0.0180, Value for tau = 12.0000 Temperature channel: Temperature -The following DELETE parameters were used: Surface Record Removal: Off Pressure filtered over width: 5 Swells deleted. Warning message if pressure difference of 2.00 Drop rates < 0.30m/s (calculated over 5 points) will be deleted. Drop rate applies in the range 1.00 to 94.99 dbars Sample interval (from FILE section of header) = 0.500 seconds. -CALIB parameters: 2006/01/19 12:41:08 Calibration type = Correct Mode: UNION - calibration specs from Header and Cal File. Salinity is computed Calibration file = D:\9922\T-adj.CCF Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 2 Temperature C 10 0.1000000E-01 0.1000000E+01 Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 5 Salinity PSS-78 130 Pressure Temperature Conductivity -REMOVECH 2006/01/23 15:01:44 The following CHANNEL(S) were removed: Temperature [C] Descent_Rate [m/s] Salinity [PSS-78] -The following DERIVEQ parameters were used Reference channel for pressure is: Pressure Reference channel for temperature is: Temperature Reference channel for conductivity ratio is: Conductivity Reference channel for salinity is: Salinity Reference channel for oxygen is: Oxygen:Dissolved:SBE Computed properties Derived Properties Ref Press Temp Type Replace ------------------ --------- --------- ------- Salinity Insitu Insitu YES -The following CLIP parameters were used. Clip by Channel Range Clip Channel: Pressure Min,Max = 0.000, 4000.000 Time Calculated from Start and Interval: Get Start Time from Header Get Time Increment from Header -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 1.00 Minimum bin value = 0.000 Bin value was used Interpolated values were used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CLIP parameters were used. Clip by Channel Range Clip Channel: Pressure Min,Max = 1.000, 2000.000 Time Not Available in File -REMOVECH 2006/01/30 09:54:28 The following CHANNEL(S) were removed: Conductivity [ratio] -HEADER EDITS: 2006/03/16 16:16:08 Applied edit header: O:\Data Processing\Header Comments\Work\1999-22-CTD.TXT Channel 1: Pressure [dbar] Units: DBAR ==> dbar Format: F13.3 ==> F7.1 Channel 2: Temperature [DEG C (ITS90)] Format: F13.4 ==> F9.4 Channel 3: Salinity [PSS-78] Format: F13.4 ==> F9.4 Channel 4: Number_of_bin_records [n/a] Format: I13 ==> I3 $END *COMMENTS SBE HEADER Sea-Bird SBE 19 Data File: FileName = \BON\9922-SBE\sw-500.HEX Software Version 4.234 Temperature SN = 1030 Conductivity SN = 1030 System UpLoad Time = Jul 09 1999 09:42:13 Ship: LAURIER Cruise: 9922 Station: SW-5 Latitude: 59 16.54 N Longitude: 148 17.69 W remarks: Sounding 110m ds SEACAT PROFILER V3.1b SN 1030 07/09/99 16:43:31.658 strain gauge pressure sensor: S/N = 189759, range = 5000 psia, tc = -221 clk = 32768.102 iop = 136 vmain = 11.1 vlith = 5.7 mode = PROFILE ncasts = 1 sample rate = 1 scan every 0.5 seconds minimum raw conductivity frequency for pump turn on = 2500 hertz pump delay = 40 seconds samples = 655 free = 86092 lwait = 0 msec SW1 = 88 battery cutoff = 7.3 volts number of voltages sampled = 0 logdata = NO S> cast 0 07/09 16:28:32 samples 0 to 654 sample rate = 1 scan every 0.5 seco nds stop = switch off # nquan = 6 # nvalues = 655 # units = specified # name 0 = scan: Scan Count # name 1 = prSM: Pressure, Strain Gauge [db] # name 2 = t090C: Temperature [ITS-90, deg C] # name 3 = c0mS/cm: Conductivity [mS/cm] # name 4 = dz/dtM: Descent Rate [m/s] # name 5 = flag: 0.000e+00 # span 0 = 1, 655 # span 1 = -11.330, 98.438 # span 2 = 5.9454, 10.7375 # span 3 = 0.338295, 35.888693 # span 4 = -1.530, 1.440 # span 5 = 0.0000e+00, 0.0000e+00 # interval = seconds: 0.5 # start_time = Jul 09 1999 16:28:32 # bad_flag = -9.990e-29 # sensor 0 = Frequency 0 temperature, 1030, 28Aug98 # sensor 1 = Frequency 1 conductivity, 1030, 28Aug98, cpcor = -9.5700e-08 # sensor 2 = Pressure Voltage, 189759, 26Aug98 # datcnv_date = Feb 18 2002 09:42:23, 5.2 # datcnv_in = D:\Data\9922-SBE\HeX\99220019.HEX D:\Data\9922-SBE\HeX\1030-98A.CO N # datcnv_skipover = 0 # file_type = ascii END* *CALIBRATION $TABLE: RAW CHANNELS ! Name Units Fmla Pad Coefficients ! -------------- ------- ---- ------ ------------ Conductivity ratio 10 -99 (0 0.233024E-01 0 0 0) $END $TABLE: CALCULATED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 130 -99 (Pressure Temperature Conductivity) () $END $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ------------- ----- ---- ------ ------------ Temperature C 10 -99 () (0.1E-01 1) $END !--1--- ---2---- ---3---- 4- !Pressu Temperat Salinity Nu !re ure mb ! ~c ! or ! ds !------ -------- -------- -- *END OF HEADER 1.0 10.2890 27.7675 4 2.0 10.2520 32.3232 4 3.0 10.2359 32.3212 5 4.0 10.2246 32.3225 3 5.0 10.2227 32.3230 2 6.0 10.2243 32.3224 2 7.0 10.2253 32.3235 2 8.0 10.2208 32.3258 3 9.0 10.1919 32.3201 2 10.0 10.1768 32.3170 2 11.0 10.1958 32.3222 3 12.0 10.1962 32.3295 2 13.0 10.1618 32.3227 2 14.0 10.1221 32.3204 2 15.0 10.1082 32.3196 2 16.0 10.1049 32.3274 2 17.0 10.0277 32.3147 3 18.0 9.9397 32.3160 2 19.0 9.8784 32.3074 2 20.0 9.7970 32.3046 3 21.0 9.6569 32.2959 2 22.0 9.5168 32.3011 2 23.0 9.3207 32.3011 3 24.0 9.1899 32.3029 2 25.0 8.9377 32.2994 2 26.0 8.6037 32.3052 3 27.0 8.2295 32.2953 2 28.0 8.0795 32.2874 3 29.0 7.9972 32.2836 2 30.0 7.9378 32.2761 2 31.0 7.9008 32.2768 3 32.0 7.8543 32.2747 3 33.0 7.7952 32.2771 3 34.0 7.7306 32.2733 2 35.0 7.6951 32.2759 2 36.0 7.6474 32.2762 2 37.0 7.5833 32.2707 3 38.0 7.5407 32.2833 3 39.0 7.4714 32.2776 2 40.0 7.3954 32.2857 2 41.0 7.2390 32.2780 2 42.0 7.0577 32.2737 3 43.0 6.9595 32.2799 3 44.0 6.8734 32.2819 3 45.0 6.8134 32.2852 3 46.0 6.7809 32.2902 2 47.0 6.7610 32.2967 3 48.0 6.7469 32.2976 2 49.0 6.7201 32.3013 2 50.0 6.6538 32.3043 2 51.0 6.5770 32.3086 3 52.0 6.5585 32.3200 3 53.0 6.5743 32.3432 3 54.0 6.5605 32.3502 2 55.0 6.5234 32.3521 3 56.0 6.5005 32.3570 2 57.0 6.4943 32.3591 2 58.0 6.4990 32.3607 3 59.0 6.5806 32.4190 3 60.0 6.6227 32.4325 2 61.0 6.6132 32.4514 3 62.0 6.5863 32.4623 2 63.0 6.5814 32.4739 2 64.0 6.5485 32.4858 3 65.0 6.5093 32.4921 2 66.0 6.4725 32.4941 3 67.0 6.4054 32.4894 2 68.0 6.3734 32.4965 3 69.0 6.3531 32.4984 2 70.0 6.3385 32.4990 2 71.0 6.3219 32.5037 2 72.0 6.2667 32.5342 3 73.0 6.2341 32.5531 3 74.0 6.2331 32.5527 2 75.0 6.2171 32.5643 2 76.0 6.1827 32.5854 3 77.0 6.1638 32.5964 2 78.0 6.1480 32.6081 2 79.0 6.1374 32.6147 2 80.0 6.1278 32.6202 3 81.0 6.1148 32.6297 3 82.0 6.1062 32.6353 2 83.0 6.1025 32.6382 1 84.0 6.0977 32.6419 3 85.0 6.0865 32.6505 2 86.0 6.0705 32.6626 2 87.0 6.0514 32.6795 3 88.0 6.0357 32.6941 2 89.0 6.0271 32.7021 2 90.0 6.0206 32.7077 3 91.0 6.0161 32.7113 2 92.0 6.0111 32.7155 2 93.0 6.0044 32.7221 3 94.0 5.9964 32.7300 2 95.0 5.9895 32.7366 3 96.0 5.9813 32.7449 2 97.0 5.9729 32.7540 3 98.0 5.9637 32.7650 4 99.0 5.9559 32.7739 5 100.0 5.9500 32.7812 5