*2013/12/16 15:19:04.90 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : UTC 1999/07/09 15:23:45.000 END TIME : UTC 1999/07/09 15:26:11.500 TIME INCREMENT : 0 0 0 0.5 0 ! (day hr min sec ms) NUMBER OF RECORDS : 127 DATA DESCRIPTION : CTD FILE TYPE : ASCII NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- --------------- -------------- -------------- 1 Pressure decibar 1 127 2 Temperature 'deg C (ITS90)' 5.8259 10.5039 3 Salinity PSS-78 23.1178 32.9965 4 Number_of_bin_records n/a 1 5 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -9.9 ' ' 7 F ' ' 1 2 -9.9 ' ' 9 F ' ' 4 3 ' ' ' ' 9 F ' ' 4 4 ' ' ' ' 3 I I 0 $END $REMARKS This file converted from Sea-Bird file: D:\Data\9922-SBE\Process\99220018.cnv $END *ADMINISTRATION MISSION : 1999-22 AGENCY : IOS, Ocean Physics Division, Sidney, B.C. COUNTRY : Canada PROJECT : Line P SCIENTIST : van Hardenberg B. PLATFORM : Sir Wilfrid Laurier *LOCATION GEOGRAPHIC AREA : Gulf of Alaska & Bering Sea STATION : SW-6 EVENT NUMBER : 18 LATITUDE : 59 8.33000 N ! (deg min) LONGITUDE : 148 7.79000 W ! (deg min) WATER DEPTH : 137 *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-19 SERIAL NUMBER : 1030 $TABLE: SENSORS ! Name Abs Depth Serial No ! ---- -------------- ---------- ' ' ' ' ' ' $END $REMARKS SOFTWARE VERSION 4.234 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- SBE_IOS 2.0 2002/02/18 13:28:05 778 778 REMOVECH 6.0 2002/02/18 19:32:31 778 778 CLIP 1.3 2006/01/13 09:27:32 466 405 REMOVECH 7.0 2006/01/16 11:55:42 405 405 FILTERS 4.3 2006/01/17 10:47:43 405 405 CALIB 11.7 2006/01/17 16:05:03 405 405 EXPFILT 1.1 2006/01/19 09:35:01 405 405 FILTERS 4.3 2006/01/19 09:39:36 405 405 DERIVEDQ 3.5 2006/01/19 11:53:58 405 405 SHIFTDAT 3.4 2006/01/19 12:22:02 405 405 CELLTM 1.3 2006/01/19 12:23:55 405 405 DELETE 6.3 2006/01/19 12:34:16 405 294 CALIB 11.7 2006/01/19 12:41:08 294 294 REMOVECH 7.0 2006/01/23 15:01:44 294 294 DERIVEDQ 3.5 2006/01/23 15:07:06 294 294 CLIP 1.3 2006/01/26 11:27:22 294 294 BINAVE 4.1 2006/01/26 13:47:48 294 128 CLIP 1.3 2006/01/30 09:37:37 128 127 REMOVECH 7.0 2006/01/30 09:54:28 127 127 HDREDIT2 2.5.1 2006/03/16 16:16:08 ? ? CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:19:04 127 127 $END $REMARKS -The following CHANNEL(S) were removed from file: Flag -Pressure was corrected using exponential fit to out-of-water data: Pcor(X)= Praw(X) -0.9 -10.4 *exp( -.0065 *X) where X=scan number -The following CLIP parameters were used. Clip by Record Number Limits First Record,Last Record = 61, 465 Time Calculated from Start and Interval: Get Start Time from Header Get Time Increment from Header -REMOVECH 2006/01/16 11:55:42 The following CHANNEL(S) were removed: Scan_Number -The following FILTER parameters were used. Boxcar filter was used. Filter width = 5 The following channel(s) were filtered. Pressure -CALIB parameters: 2006/01/17 16:05:03 Calibration type = Raw Mode: ONLY - calibration specs from Cal File only. Calibration file = D:\9922\Cratio-mS-cm.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 3 Conductivity ratio 10 0.0000000E+00 0.2330240E-01 0.0000000E+00 0.0000000E+00 0.0000000E+00 -The following EXPFILT parameters were used: Channels to Filter: Conductivity Salinity will NOT be Recalculated after Filtering Sampling Interval: 0.500 Filter Time Response: 0.500 Calculated Filter Coeff a= 0.582 -The following FILTER parameters were used. Boxcar filter was used. Filter width = 3 The following channel(s) were filtered. Temperature -The following DERIVEQ parameters were used Reference channel for pressure is: Pressure Reference channel for temperature is: Temperature Reference channel for conductivity ratio is: Conductivity Reference channel for salinity is: Salinity Reference channel for oxygen is: Oxygen:Dissolved:SBE Computed properties Derived Properties Ref Press Temp Type Replace ------------------ --------- --------- ------- Salinity Insitu Insitu YES -The following SHIFT parameters were used. Shift Channel: Temperature # of Records to Advance (-ve for Delay): At REC# 0 Shift= 0.90 Salinity was recalculated after shift -The following CELLTM parameters were used. Value for alpha = 0.0180, Value for tau = 12.0000 Temperature channel: Temperature -The following DELETE parameters were used: Surface Record Removal: Off Pressure filtered over width: 5 Swells deleted. Warning message if pressure difference of 2.00 Drop rates < 0.30m/s (calculated over 5 points) will be deleted. Drop rate applies in the range 1.00 to 122.21 dbars Sample interval (from FILE section of header) = 0.500 seconds. -CALIB parameters: 2006/01/19 12:41:08 Calibration type = Correct Mode: UNION - calibration specs from Header and Cal File. Salinity is computed Calibration file = D:\9922\T-adj.CCF Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 2 Temperature C 10 0.1000000E-01 0.1000000E+01 Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 5 Salinity PSS-78 130 Pressure Temperature Conductivity -REMOVECH 2006/01/23 15:01:44 The following CHANNEL(S) were removed: Temperature [C] Descent_Rate [m/s] Salinity [PSS-78] -The following DERIVEQ parameters were used Reference channel for pressure is: Pressure Reference channel for temperature is: Temperature Reference channel for conductivity ratio is: Conductivity Reference channel for salinity is: Salinity Reference channel for oxygen is: Oxygen:Dissolved:SBE Computed properties Derived Properties Ref Press Temp Type Replace ------------------ --------- --------- ------- Salinity Insitu Insitu YES -The following CLIP parameters were used. Clip by Channel Range Clip Channel: Pressure Min,Max = 0.000, 4000.000 Time Calculated from Start and Interval: Get Start Time from Header Get Time Increment from Header -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 1.00 Minimum bin value = 0.000 Bin value was used Interpolated values were used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CLIP parameters were used. Clip by Channel Range Clip Channel: Pressure Min,Max = 1.000, 2000.000 Time Not Available in File -REMOVECH 2006/01/30 09:54:28 The following CHANNEL(S) were removed: Conductivity [ratio] -HEADER EDITS: 2006/03/16 16:16:08 Applied edit header: O:\Data Processing\Header Comments\Work\1999-22-CTD.TXT Channel 1: Pressure [dbar] Units: DBAR ==> dbar Format: F13.3 ==> F7.1 Channel 2: Temperature [DEG C (ITS90)] Format: F13.4 ==> F9.4 Channel 3: Salinity [PSS-78] Format: F13.4 ==> F9.4 Channel 4: Number_of_bin_records [n/a] Format: I13 ==> I3 $END *COMMENTS SBE HEADER Sea-Bird SBE 19 Data File: FileName = \BON\9922-SBE\sw-601.HEX Software Version 4.234 Temperature SN = 1030 Conductivity SN = 1030 System UpLoad Time = Jul 09 1999 08:31:24 Ship: LAURIER Cruise: 9922 Station: SW-6 Latitude: 59 08.33N Longitude: 148 07.79W remarks: sounder 137m rain - lots of albatrosses ds SEACAT PROFILER V3.1b SN 1030 07/09/99 15:32:26.133 strain gauge pressure sensor: S/N = 189759, range = 5000 psia, tc = -221 clk = 32768.070 iop = 135 vmain = 11.1 vlith = 5.7 mode = PROFILE ncasts = 2 sample rate = 1 scan every 0.5 seconds minimum raw conductivity frequency for pump turn on = 2500 hertz pump delay = 40 seconds samples = 778 free = 85969 lwait = 0 msec SW1 = 88 battery cutoff = 7.3 volts number of voltages sampled = 0 logdata = NO S> cast 1 07/09 15:23:15 samples 0 to 777 sample rate = 1 scan every 0.5 seco nds stop = switch off # nquan = 6 # nvalues = 778 # units = specified # name 0 = scan: Scan Count # name 1 = prSM: Pressure, Strain Gauge [db] # name 2 = t090C: Temperature [ITS-90, deg C] # name 3 = c0mS/cm: Conductivity [mS/cm] # name 4 = dz/dtM: Descent Rate [m/s] # name 5 = flag: 0.000e+00 # span 0 = 1, 778 # span 1 = -11.330, 125.880 # span 2 = 5.8238, 10.6361 # span 3 = 0.070384, 35.683761 # span 4 = -1.530, 1.530 # span 5 = 0.0000e+00, 0.0000e+00 # interval = seconds: 0.5 # start_time = Jul 09 1999 15:23:15 # bad_flag = -9.990e-29 # sensor 0 = Frequency 0 temperature, 1030, 28Aug98 # sensor 1 = Frequency 1 conductivity, 1030, 28Aug98, cpcor = -9.5700e-08 # sensor 2 = Pressure Voltage, 189759, 26Aug98 # datcnv_date = Feb 18 2002 09:42:22, 5.2 # datcnv_in = D:\Data\9922-SBE\HeX\99220018.HEX D:\Data\9922-SBE\HeX\1030-98A.CO N # datcnv_skipover = 0 # file_type = ascii END* *CALIBRATION $TABLE: RAW CHANNELS ! Name Units Fmla Pad Coefficients ! -------------- ------- ---- ------ ------------ Conductivity ratio 10 -99 (0 0.233024E-01 0 0 0) $END $TABLE: CALCULATED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 130 -99 (Pressure Temperature Conductivity) () $END $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ------------- ----- ---- ------ ------------ Temperature C 10 -99 () (0.1E-01 1) $END !--1--- ---2---- ---3---- 4- !Pressu Temperat Salinity Nu !re ure mb ! ~c ! or ! ds !------ -------- -------- -- *END OF HEADER 1.0 10.3851 23.1178 2 2.0 10.4899 31.5351 5 3.0 10.5008 32.0937 4 4.0 10.5039 32.0926 2 5.0 10.5008 32.0919 3 6.0 10.4987 32.0915 3 7.0 10.4991 32.0912 2 8.0 10.4992 32.0910 2 9.0 10.4983 32.0906 2 10.0 10.4970 32.0913 2 11.0 10.4969 32.0922 3 12.0 10.4976 32.0909 2 13.0 10.4979 32.0908 2 14.0 10.4980 32.0908 2 15.0 10.4942 32.0929 2 16.0 10.4827 32.1007 3 17.0 10.4529 32.1142 2 18.0 10.3977 32.1418 3 19.0 10.2289 32.1935 2 20.0 9.9771 32.2543 2 21.0 9.7518 32.2748 2 22.0 9.5826 32.2907 2 23.0 9.4494 32.2954 2 24.0 9.3616 32.2998 3 25.0 9.1801 32.3020 2 26.0 8.9930 32.3074 2 27.0 8.7879 32.3148 2 28.0 8.6062 32.3287 2 29.0 8.3121 32.3297 2 30.0 7.8432 32.3332 4 31.0 7.6573 32.3577 2 32.0 7.6117 32.3592 2 33.0 7.5497 32.3581 2 34.0 7.5181 32.3577 2 35.0 7.5041 32.3586 2 36.0 7.4847 32.3593 3 37.0 7.4370 32.3615 2 38.0 7.3948 32.3654 2 39.0 7.3650 32.3662 2 40.0 7.3606 32.3693 2 41.0 7.3555 32.3745 2 42.0 7.3085 32.3766 3 43.0 7.2402 32.3779 2 44.0 7.1930 32.3798 2 45.0 7.1277 32.3820 2 46.0 7.0635 32.3872 2 47.0 6.9841 32.3947 3 48.0 6.8431 32.4173 2 49.0 6.7136 32.4303 2 50.0 6.6165 32.4379 2 51.0 6.5542 32.4556 2 52.0 6.5064 32.4687 2 53.0 6.4742 32.4769 2 54.0 6.4393 32.4897 3 55.0 6.3871 32.5165 2 56.0 6.3616 32.5358 2 57.0 6.3551 32.5412 1 58.0 6.3451 32.5446 2 59.0 6.3279 32.5513 2 60.0 6.3153 32.5566 3 61.0 6.3089 32.5592 2 62.0 6.3028 32.5616 2 63.0 6.2836 32.5659 2 64.0 6.2654 32.5707 1 65.0 6.2503 32.5771 3 66.0 6.2339 32.5837 2 67.0 6.2165 32.5920 2 68.0 6.1919 32.6025 2 69.0 6.1670 32.6114 2 70.0 6.1449 32.6205 3 71.0 6.1315 32.6261 2 72.0 6.1159 32.6346 2 73.0 6.0961 32.6469 2 74.0 6.0817 32.6568 2 75.0 6.0615 32.6671 3 76.0 6.0470 32.6756 2 77.0 6.0287 32.6848 2 78.0 6.0146 32.6924 2 79.0 5.9969 32.7008 3 80.0 5.9732 32.7122 2 81.0 5.9580 32.7214 1 82.0 5.9482 32.7281 2 83.0 5.9320 32.7408 2 84.0 5.9156 32.7534 3 85.0 5.9102 32.7576 3 86.0 5.9079 32.7594 2 87.0 5.9064 32.7592 2 88.0 5.9019 32.7631 2 89.0 5.8926 32.7725 2 90.0 5.8869 32.7777 2 91.0 5.8844 32.7804 2 92.0 5.8833 32.7817 3 93.0 5.8820 32.7839 2 94.0 5.8795 32.7888 3 95.0 5.8770 32.7917 2 96.0 5.8734 32.7962 2 97.0 5.8703 32.7998 2 98.0 5.8677 32.8029 3 99.0 5.8607 32.8118 3 100.0 5.8571 32.8151 2 101.0 5.8567 32.8191 1 102.0 5.8556 32.8212 2 103.0 5.8531 32.8249 3 104.0 5.8519 32.8256 4 105.0 5.8514 32.8258 2 106.0 5.8507 32.8260 1 107.0 5.8502 32.8261 2 108.0 5.8499 32.8278 3 109.0 5.8506 32.8345 2 110.0 5.8541 32.8389 3 111.0 5.8574 32.8466 2 112.0 5.8588 32.8491 2 113.0 5.8591 32.8528 3 114.0 5.8580 32.8581 2 115.0 5.8536 32.8705 2 116.0 5.8497 32.8795 3 117.0 5.8486 32.8840 2 118.0 5.8456 32.8923 3 119.0 5.8367 32.9207 3 120.0 5.8289 32.9660 2 121.0 5.8271 32.9836 2 122.0 5.8259 32.9908 2 123.0 5.8260 32.9923 2 124.0 5.8260 32.9938 3 125.0 5.8261 32.9937 3 126.0 5.8259 32.9957 3 127.0 5.8271 32.9965 4