*2013/12/16 15:19:04.23 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : UTC 1999/07/08 18:32:18.500 END TIME : UTC 1999/07/08 18:34:18.000 TIME INCREMENT : 0 0 0 0.5 0 ! (day hr min sec ms) NUMBER OF RECORDS : 101 DATA DESCRIPTION : CTD FILE TYPE : ASCII NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- --------------- -------------- -------------- 1 Pressure decibar 1 101 2 Temperature 'deg C (ITS90)' 6.4486 11.4121 3 Salinity PSS-78 30.7389 32.3949 4 Number_of_bin_records n/a 1 10 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -9.9 ' ' 7 F ' ' 1 2 -9.9 ' ' 9 F ' ' 4 3 ' ' ' ' 9 F ' ' 4 4 ' ' ' ' 3 I I 0 $END $REMARKS This file converted from Sea-Bird file: D:\Data\9922-SBE\Process\99220010.cnv $END *ADMINISTRATION MISSION : 1999-22 AGENCY : IOS, Ocean Physics Division, Sidney, B.C. COUNTRY : Canada PROJECT : Line P SCIENTIST : van Hardenberg B. PLATFORM : Sir Wilfrid Laurier *LOCATION GEOGRAPHIC AREA : Gulf of Alaska & Bering Sea STATION : CS2 MOOR EVENT NUMBER : 10 LATITUDE : 59 38.19000 N ! (deg min) LONGITUDE : 144 0.23000 W ! (deg min) WATER DEPTH : 117 *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-19 SERIAL NUMBER : 1030 $TABLE: SENSORS ! Name Abs Depth Serial No ! ---- -------------- ---------- ' ' ' ' ' ' $END $REMARKS SOFTWARE VERSION 4.234 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- SBE_IOS 2.0 2002/02/18 13:27:50 884 884 REMOVECH 6.0 2002/02/18 19:32:19 884 884 CLIP 1.3 2006/01/13 08:44:19 632 367 REMOVECH 7.0 2006/01/16 11:55:38 367 367 FILTERS 4.3 2006/01/17 10:47:41 367 367 CALIB 11.7 2006/01/17 16:05:01 367 367 EXPFILT 1.1 2006/01/19 09:35:00 367 367 FILTERS 4.3 2006/01/19 09:39:34 367 367 DERIVEDQ 3.5 2006/01/19 11:53:55 367 367 SHIFTDAT 3.4 2006/01/19 12:22:00 367 367 CELLTM 1.3 2006/01/19 12:23:52 367 367 DELETE 6.3 2006/01/19 12:34:14 367 247 CALIB 11.7 2006/01/19 12:41:06 247 247 REMOVECH 7.0 2006/01/23 15:01:42 247 247 DERIVEDQ 3.5 2006/01/23 15:07:05 247 247 CLIP 1.3 2006/01/26 11:27:20 247 240 BINAVE 4.1 2006/01/26 13:47:46 240 102 CLIP 1.3 2006/01/30 09:37:35 102 101 REMOVECH 7.0 2006/01/30 09:54:26 101 101 HDREDIT2 2.5.1 2006/03/16 16:16:06 ? ? CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:19:04 101 101 $END $REMARKS -The following CHANNEL(S) were removed from file: Flag -Pressure was corrected using exponential fit to out-of-water data: Pcor(X)= Praw(X) -0.7 -10.6 *exp( -.0065 *X) where X=scan number -The following CLIP parameters were used. Clip by Record Number Limits First Record,Last Record = 265, 631 Time Calculated from Start and Interval: Get Start Time from Header Get Time Increment from Header -REMOVECH 2006/01/16 11:55:38 The following CHANNEL(S) were removed: Scan_Number -The following FILTER parameters were used. Boxcar filter was used. Filter width = 5 The following channel(s) were filtered. Pressure -CALIB parameters: 2006/01/17 16:05:01 Calibration type = Raw Mode: ONLY - calibration specs from Cal File only. Calibration file = D:\9922\Cratio-mS-cm.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 3 Conductivity ratio 10 0.0000000E+00 0.2330240E-01 0.0000000E+00 0.0000000E+00 0.0000000E+00 -The following EXPFILT parameters were used: Channels to Filter: Conductivity Salinity will NOT be Recalculated after Filtering Sampling Interval: 0.500 Filter Time Response: 0.500 Calculated Filter Coeff a= 0.582 -The following FILTER parameters were used. Boxcar filter was used. Filter width = 3 The following channel(s) were filtered. Temperature -The following DERIVEQ parameters were used Reference channel for pressure is: Pressure Reference channel for temperature is: Temperature Reference channel for conductivity ratio is: Conductivity Reference channel for salinity is: Salinity Reference channel for oxygen is: Oxygen:Dissolved:SBE Computed properties Derived Properties Ref Press Temp Type Replace ------------------ --------- --------- ------- Salinity Insitu Insitu YES -The following SHIFT parameters were used. Shift Channel: Temperature # of Records to Advance (-ve for Delay): At REC# 0 Shift= 0.90 Salinity was recalculated after shift -The following CELLTM parameters were used. Value for alpha = 0.0180, Value for tau = 12.0000 Temperature channel: Temperature -The following DELETE parameters were used: Surface Record Removal: Off Pressure filtered over width: 5 Swells deleted. Warning message if pressure difference of 2.00 Drop rates < 0.30m/s (calculated over 5 points) will be deleted. Drop rate applies in the range 1.00 to 96.30 dbars Sample interval (from FILE section of header) = 0.500 seconds. -CALIB parameters: 2006/01/19 12:41:06 Calibration type = Correct Mode: UNION - calibration specs from Header and Cal File. Salinity is computed Calibration file = D:\9922\T-adj.CCF Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 2 Temperature C 10 0.1000000E-01 0.1000000E+01 Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 5 Salinity PSS-78 130 Pressure Temperature Conductivity -REMOVECH 2006/01/23 15:01:42 The following CHANNEL(S) were removed: Temperature [C] Descent_Rate [m/s] Salinity [PSS-78] -The following DERIVEQ parameters were used Reference channel for pressure is: Pressure Reference channel for temperature is: Temperature Reference channel for conductivity ratio is: Conductivity Reference channel for salinity is: Salinity Reference channel for oxygen is: Oxygen:Dissolved:SBE Computed properties Derived Properties Ref Press Temp Type Replace ------------------ --------- --------- ------- Salinity Insitu Insitu YES -The following CLIP parameters were used. Clip by Channel Range Clip Channel: Pressure Min,Max = 0.000, 4000.000 Time Calculated from Start and Interval: Get Start Time from Header Get Time Increment from Header -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 1.00 Minimum bin value = 0.000 Bin value was used Interpolated values were used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CLIP parameters were used. Clip by Channel Range Clip Channel: Pressure Min,Max = 1.000, 2000.000 Time Not Available in File -REMOVECH 2006/01/30 09:54:26 The following CHANNEL(S) were removed: Conductivity [ratio] -HEADER EDITS: 2006/03/16 16:16:06 Applied edit header: O:\Data Processing\Header Comments\Work\1999-22-CTD.TXT Channel 1: Pressure [dbar] Units: DBAR ==> dbar Format: F13.3 ==> F7.1 Channel 2: Temperature [DEG C (ITS90)] Format: F13.4 ==> F9.4 Channel 3: Salinity [PSS-78] Format: F13.4 ==> F9.4 Channel 4: Number_of_bin_records [n/a] Format: I13 ==> I3 $END *COMMENTS SBE HEADER Sea-Bird SBE 19 Data File: FileName = \BON\9922-SBE\ky-402.HEX Software Version 4.234 Temperature SN = 1030 Conductivity SN = 1030 System UpLoad Time = Jul 08 1999 12:40:59 Ship: LAURIER Cruise: 9922 Station: KY-CS2 mooring Latitude: 59 38.19N Longitude: 144 0.23W remarks: 111m sounding ds SEACAT PROFILER V3.1b SN 1030 07/08/99 19:41:19.559 strain gauge pressure sensor: S/N = 189759, range = 5000 psia, tc = -221 clk = 32768.070 iop = 136 vmain = 11.2 vlith = 5.7 mode = PROFILE ncasts = 4 sample rate = 1 scan every 0.5 seconds minimum raw conductivity frequency for pump turn on = 2500 hertz pump delay = 40 seconds samples = 5256 free = 81491 lwait = 0 msec SW1 = 88 battery cutoff = 7.3 volts number of voltages sampled = 0 logdata = NO S> cast 2 07/08 18:30:03 samples 1623 to 2511 sample rate = 1 scan every 0.5 seconds stop = switch off # nquan = 6 # nvalues = 884 # units = specified # name 0 = scan: Scan Count # name 1 = prSM: Pressure, Strain Gauge [db] # name 2 = t090C: Temperature [ITS-90, deg C] # name 3 = c0mS/cm: Conductivity [mS/cm] # name 4 = dz/dtM: Descent Rate [m/s] # name 5 = flag: 0.000e+00 # span 0 = 1, 884 # span 1 = -10.880, 100.688 # span 2 = 6.4443, 12.0812 # span 3 = 0.343385, 36.131162 # span 4 = -1.620, 1.440 # span 5 = 0.0000e+00, 0.0000e+00 # interval = seconds: 0.5 # start_time = Jul 08 1999 18:30:03 # bad_flag = -9.990e-29 # sensor 0 = Frequency 0 temperature, 1030, 28Aug98 # sensor 1 = Frequency 1 conductivity, 1030, 28Aug98, cpcor = -9.5700e-08 # sensor 2 = Pressure Voltage, 189759, 26Aug98 # datcnv_date = Feb 18 2002 09:41:55, 5.2 # datcnv_in = D:\Data\9922-SBE\HeX\99220010.HEX D:\Data\9922-SBE\HeX\1030-98A.CO N # datcnv_skipover = 0 # file_type = ascii END* *CALIBRATION $TABLE: RAW CHANNELS ! Name Units Fmla Pad Coefficients ! -------------- ------- ---- ------ ------------ Conductivity ratio 10 -99 (0 0.233024E-01 0 0 0) $END $TABLE: CALCULATED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 130 -99 (Pressure Temperature Conductivity) () $END $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ------------- ----- ---- ------ ------------ Temperature C 10 -99 () (0.1E-01 1) $END !--1--- ---2---- ---3---- 4- !Pressu Temperat Salinity Nu !re ure mb ! ~c ! or ! ds !------ -------- -------- -- *END OF HEADER 1.0 11.0383 30.7389 5 2.0 11.0083 30.8825 1 3.0 11.0085 30.8829 4 4.0 11.0056 30.8824 2 5.0 11.0030 30.8825 3 6.0 10.9992 30.8822 3 7.0 10.9950 30.8822 2 8.0 10.9850 30.8822 3 9.0 10.9979 30.8888 2 10.0 11.0254 30.8962 2 11.0 11.0617 30.9040 3 12.0 11.1489 30.9237 2 13.0 11.2231 31.0293 2 14.0 11.1900 31.2137 3 15.0 11.3412 31.5397 2 16.0 11.4121 31.6388 2 17.0 11.3865 31.7115 3 18.0 11.1418 31.7789 2 19.0 10.2079 31.8002 2 20.0 9.1838 31.8259 2 21.0 8.6516 31.8922 3 22.0 8.5021 31.9244 2 23.0 8.4555 31.9442 2 24.0 8.4164 31.9647 2 25.0 8.3818 31.9774 3 26.0 8.3456 31.9819 2 27.0 8.3062 31.9781 2 28.0 8.2638 31.9950 2 29.0 8.2011 32.0019 3 30.0 8.1591 32.0173 2 31.0 8.1103 32.0173 2 32.0 8.0603 32.0270 2 33.0 7.9159 32.0084 3 34.0 7.8139 32.0111 2 35.0 7.7344 32.0144 2 36.0 7.6528 32.0150 2 37.0 7.6055 32.0180 2 38.0 7.5972 32.0251 2 39.0 7.6031 32.0286 2 40.0 7.6045 32.0371 2 41.0 7.5830 32.0420 3 42.0 7.5174 32.0527 2 43.0 7.4512 32.0734 3 44.0 7.3845 32.0889 2 45.0 7.3364 32.0948 3 46.0 7.3022 32.0979 2 47.0 7.2856 32.0996 1 48.0 7.2772 32.1008 2 49.0 7.2655 32.1003 3 50.0 7.2450 32.1073 2 51.0 7.2277 32.1106 2 52.0 7.2172 32.1159 2 53.0 7.1942 32.1178 2 54.0 7.1709 32.1204 2 55.0 7.1538 32.1361 3 56.0 7.1090 32.1518 2 57.0 7.0700 32.1621 2 58.0 7.0214 32.1806 3 59.0 6.9664 32.1810 2 60.0 6.9513 32.1825 2 61.0 6.9360 32.1889 2 62.0 6.9121 32.1918 2 63.0 6.8975 32.1957 3 64.0 6.8888 32.1984 2 65.0 6.8838 32.1987 2 66.0 6.8834 32.2014 2 67.0 6.8823 32.2038 3 68.0 6.8779 32.2068 2 69.0 6.8775 32.2099 2 70.0 6.8793 32.2155 3 71.0 6.8712 32.2215 2 72.0 6.8561 32.2233 2 73.0 6.8191 32.2285 3 74.0 6.7722 32.2320 2 75.0 6.7583 32.2371 2 76.0 6.7854 32.2478 3 77.0 6.7829 32.2511 2 78.0 6.7487 32.2540 2 79.0 6.7309 32.2629 2 80.0 6.7130 32.2693 2 81.0 6.7089 32.2781 2 82.0 6.7000 32.2804 3 83.0 6.6555 32.2812 2 84.0 6.6259 32.2856 2 85.0 6.6095 32.2878 2 86.0 6.5998 32.2903 2 87.0 6.5952 32.2944 2 88.0 6.5915 32.2965 2 89.0 6.5922 32.2979 2 90.0 6.5930 32.3016 2 91.0 6.5826 32.3052 2 92.0 6.5673 32.3096 2 93.0 6.5592 32.3153 2 94.0 6.5519 32.3232 2 95.0 6.5529 32.3413 2 96.0 6.5521 32.3487 2 97.0 6.5318 32.3509 2 98.0 6.5077 32.3585 2 99.0 6.4838 32.3716 3 100.0 6.4558 32.3885 3 101.0 6.4486 32.3949 10