*2013/12/16 15:19:04.18 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : UTC 1999/07/08 17:17:37.500 END TIME : UTC 1999/07/08 17:19:53.000 TIME INCREMENT : 0 0 0 0.5 0 ! (day hr min sec ms) NUMBER OF RECORDS : 116 DATA DESCRIPTION : CTD FILE TYPE : ASCII NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- --------------- -------------- -------------- 1 Pressure decibar 1 116 2 Temperature 'deg C (ITS90)' 6.0752 11.1403 3 Salinity PSS-78 29.7665 32.6381 4 Number_of_bin_records n/a 1 6 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -9.9 ' ' 7 F ' ' 1 2 -9.9 ' ' 9 F ' ' 4 3 ' ' ' ' 9 F ' ' 4 4 ' ' ' ' 3 I I 0 $END $REMARKS This file converted from Sea-Bird file: D:\Data\9922-SBE\Process\99220009.cnv $END *ADMINISTRATION MISSION : 1999-22 AGENCY : IOS, Ocean Physics Division, Sidney, B.C. COUNTRY : Canada PROJECT : Line P SCIENTIST : van Hardenberg B. PLATFORM : Sir Wilfrid Laurier *LOCATION GEOGRAPHIC AREA : Gulf of Alaska & Bering Sea STATION : KY-3 EVENT NUMBER : 9 LATITUDE : 59 39.89000 N ! (deg min) LONGITUDE : 144 0.08000 W ! (deg min) WATER DEPTH : 127 *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-19 SERIAL NUMBER : 1030 $TABLE: SENSORS ! Name Abs Depth Serial No ! ---- -------------- ---------- ' ' ' ' ' ' $END $REMARKS SOFTWARE VERSION 4.234 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- SBE_IOS 2.0 2002/02/18 13:27:49 825 825 REMOVECH 6.0 2002/02/18 19:32:18 825 825 CLIP 1.3 2006/01/13 08:43:45 532 420 REMOVECH 7.0 2006/01/16 11:55:38 420 420 FILTERS 4.3 2006/01/17 10:47:41 420 420 CALIB 11.7 2006/01/17 16:05:01 420 420 EXPFILT 1.1 2006/01/19 09:35:00 420 420 FILTERS 4.3 2006/01/19 09:39:34 420 420 DERIVEDQ 3.5 2006/01/19 11:53:55 420 420 SHIFTDAT 3.4 2006/01/19 12:22:00 420 420 CELLTM 1.3 2006/01/19 12:23:52 420 420 DELETE 6.3 2006/01/19 12:34:14 420 272 CALIB 11.7 2006/01/19 12:41:06 272 272 REMOVECH 7.0 2006/01/23 15:01:42 272 272 DERIVEDQ 3.5 2006/01/23 15:07:05 272 272 CLIP 1.3 2006/01/26 11:27:20 272 272 BINAVE 4.1 2006/01/26 13:47:46 272 117 CLIP 1.3 2006/01/30 09:37:35 117 116 REMOVECH 7.0 2006/01/30 09:54:26 116 116 HDREDIT2 2.5.1 2006/03/16 16:16:06 ? ? CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:19:04 116 116 $END $REMARKS -The following CHANNEL(S) were removed from file. Flag -Pressure was corrected using exponential fit to out-of-water data: Pcor(X)= Praw(X) -0.9 -10.6 *exp( -.0065 *X) where X=scan number -The following CLIP parameters were used. Clip by Record Number Limits First Record,Last Record = 112, 531 Time Calculated from Start and Interval: Get Start Time from Header Get Time Increment from Header -REMOVECH 2006/01/16 11:55:38 The following CHANNEL(S) were removed: Scan_Number -The following FILTER parameters were used. Boxcar filter was used. Filter width = 5 The following channel(s) were filtered. Pressure -CALIB parameters: 2006/01/17 16:05:01 Calibration type = Raw Mode: ONLY - calibration specs from Cal File only. Calibration file = D:\9922\Cratio-mS-cm.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 3 Conductivity ratio 10 0.0000000E+00 0.2330240E-01 0.0000000E+00 0.0000000E+00 0.0000000E+00 -The following EXPFILT parameters were used: Channels to Filter: Conductivity Salinity will NOT be Recalculated after Filtering Sampling Interval: 0.500 Filter Time Response: 0.500 Calculated Filter Coeff a= 0.582 -The following FILTER parameters were used. Boxcar filter was used. Filter width = 3 The following channel(s) were filtered. Temperature -The following DERIVEQ parameters were used Reference channel for pressure is: Pressure Reference channel for temperature is: Temperature Reference channel for conductivity ratio is: Conductivity Reference channel for salinity is: Salinity Reference channel for oxygen is: Oxygen:Dissolved:SBE Computed properties Derived Properties Ref Press Temp Type Replace ------------------ --------- --------- ------- Salinity Insitu Insitu YES -The following SHIFT parameters were used. Shift Channel: Temperature # of Records to Advance (-ve for Delay): At REC# 0 Shift= 0.90 Salinity was recalculated after shift -The following CELLTM parameters were used. Value for alpha = 0.0180, Value for tau = 12.0000 Temperature channel: Temperature -The following DELETE parameters were used: Surface Record Removal: Off Pressure filtered over width: 5 Swells deleted. Warning message if pressure difference of 2.00 Drop rates < 0.30m/s (calculated over 5 points) will be deleted. Drop rate applies in the range 1.00 to 110.89 dbars Sample interval (from FILE section of header) = 0.500 seconds. -CALIB parameters: 2006/01/19 12:41:06 Calibration type = Correct Mode: UNION - calibration specs from Header and Cal File. Salinity is computed Calibration file = D:\9922\T-adj.CCF Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 2 Temperature C 10 0.1000000E-01 0.1000000E+01 Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 5 Salinity PSS-78 130 Pressure Temperature Conductivity -REMOVECH 2006/01/23 15:01:42 The following CHANNEL(S) were removed: Temperature [C] Descent_Rate [m/s] Salinity [PSS-78] -The following DERIVEQ parameters were used Reference channel for pressure is: Pressure Reference channel for temperature is: Temperature Reference channel for conductivity ratio is: Conductivity Reference channel for salinity is: Salinity Reference channel for oxygen is: Oxygen:Dissolved:SBE Computed properties Derived Properties Ref Press Temp Type Replace ------------------ --------- --------- ------- Salinity Insitu Insitu YES -The following CLIP parameters were used. Clip by Channel Range Clip Channel: Pressure Min,Max = 0.000, 4000.000 Time Calculated from Start and Interval: Get Start Time from Header Get Time Increment from Header -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 1.00 Minimum bin value = 0.000 Bin value was used Interpolated values were used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CLIP parameters were used. Clip by Channel Range Clip Channel: Pressure Min,Max = 1.000, 2000.000 Time Not Available in File -REMOVECH 2006/01/30 09:54:26 The following CHANNEL(S) were removed: Conductivity [ratio] -HEADER EDITS: 2006/03/16 16:16:06 Applied edit header: O:\Data Processing\Header Comments\Work\1999-22-CTD.TXT Channel 1: Pressure [dbar] Units: DBAR ==> dbar Format: F13.3 ==> F7.1 Channel 2: Temperature [DEG C (ITS90)] Format: F13.4 ==> F9.4 Channel 3: Salinity [PSS-78] Format: F13.4 ==> F9.4 Channel 4: Number_of_bin_records [n/a] Format: I13 ==> I3 $END *COMMENTS SBE HEADER Sea-Bird SBE 19 Data File: FileName = \BON\9922-SBE\ky-301.HEX Software Version 4.234 Temperature SN = 1030 Conductivity SN = 1030 System UpLoad Time = Jul 08 1999 10:26:09 Ship: LAURIER Cruise: 9922 Station: KY-3 Latitude: 59 39.89N Longitude: 144 0.08W remarks: 121m sounding ds SEACAT PROFILER V3.1b SN 1030 07/08/99 17:25:38.609 strain gauge pressure sensor: S/N = 189759, range = 5000 psia, tc = -221 clk = 32768.094 iop = 136 vmain = 11.5 vlith = 5.7 mode = PROFILE ncasts = 2 sample rate = 1 scan every 0.5 seconds minimum raw conductivity frequency for pump turn on = 2500 hertz pump delay = 40 seconds samples = 1623 free = 85124 lwait = 0 msec SW1 = 88 battery cutoff = 7.3 volts number of voltages sampled = 0 logdata = NO S> cast 1 07/08 17:16:42 samples 796 to 1622 sample rate = 1 scan every 0.5 s econds stop = switch off # nquan = 6 # nvalues = 825 # units = specified # name 0 = scan: Scan Count # name 1 = prSM: Pressure, Strain Gauge [db] # name 2 = t090C: Temperature [ITS-90, deg C] # name 3 = c0mS/cm: Conductivity [mS/cm] # name 4 = dz/dtM: Descent Rate [m/s] # name 5 = flag: 0.000e+00 # span 0 = 1, 825 # span 1 = -11.780, 114.633 # span 2 = 6.0672, 11.4109 # span 3 = 0.318294, 35.348370 # span 4 = -1.440, 1.440 # span 5 = 0.0000e+00, 0.0000e+00 # interval = seconds: 0.5 # start_time = Jul 08 1999 17:16:42 # bad_flag = -9.990e-29 # sensor 0 = Frequency 0 temperature, 1030, 28Aug98 # sensor 1 = Frequency 1 conductivity, 1030, 28Aug98, cpcor = -9.5700e-08 # sensor 2 = Pressure Voltage, 189759, 26Aug98 # datcnv_date = Feb 18 2002 09:41:53, 5.2 # datcnv_in = D:\Data\9922-SBE\HeX\99220009.HEX D:\Data\9922-SBE\HeX\1030-98A.CO N # datcnv_skipover = 0 # file_type = ascii END* *CALIBRATION $TABLE: RAW CHANNELS ! Name Units Fmla Pad Coefficients ! -------------- ------- ---- ------ ------------ Conductivity ratio 10 -99 (0 0.233024E-01 0 0 0) $END $TABLE: CALCULATED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 130 -99 (Pressure Temperature Conductivity) () $END $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ------------- ----- ---- ------ ------------ Temperature C 10 -99 () (0.1E-01 1) $END !--1--- ---2---- ---3---- 4- !Pressu Temperat Salinity Nu !re ure mb ! ~c ! or ! ds !------ -------- -------- -- *END OF HEADER 1.0 10.9533 29.7665 5 2.0 10.9284 30.8771 3 3.0 10.9286 30.8775 4 4.0 10.9298 30.8782 3 5.0 10.9292 30.8787 2 6.0 10.9222 30.8784 3 7.0 10.9138 30.8789 3 8.0 10.9095 30.8804 2 9.0 10.9023 30.8830 3 10.0 10.8865 30.8828 2 11.0 10.8798 30.8854 2 12.0 10.8823 30.8897 2 13.0 10.8857 30.8989 3 14.0 10.8900 30.9146 2 15.0 10.8878 30.9341 3 16.0 10.9281 30.9542 2 17.0 11.0623 31.0074 2 18.0 11.1403 31.1312 3 19.0 10.7887 31.2283 2 20.0 10.5187 31.3263 2 21.0 10.2579 31.4340 2 22.0 9.8758 31.5361 2 23.0 9.6033 31.6888 2 24.0 9.4083 31.7683 3 25.0 8.9176 31.8523 2 26.0 8.2315 31.8666 2 27.0 7.8866 31.9025 2 28.0 7.8054 31.9089 2 29.0 7.7830 31.9211 2 30.0 7.6934 31.9414 3 31.0 7.6017 31.9448 2 32.0 7.5833 31.9471 2 33.0 7.5676 31.9499 3 34.0 7.5387 31.9566 2 35.0 7.5096 31.9646 2 36.0 7.4866 31.9729 2 37.0 7.4478 31.9882 3 38.0 7.4286 31.9964 2 39.0 7.4242 31.9978 2 40.0 7.4174 32.0013 2 41.0 7.4030 32.0074 2 42.0 7.3808 32.0141 2 43.0 7.3642 32.0207 2 44.0 7.3569 32.0248 2 45.0 7.3484 32.0306 3 46.0 7.3239 32.0414 2 47.0 7.2898 32.0512 2 48.0 7.2569 32.0642 2 49.0 7.2408 32.0719 3 50.0 7.2285 32.0770 2 51.0 7.2140 32.0836 2 52.0 7.1923 32.0942 2 53.0 7.1689 32.1049 2 54.0 7.1590 32.1157 2 55.0 7.1615 32.1303 2 56.0 7.1613 32.1431 2 57.0 7.1569 32.1523 3 58.0 7.1603 32.1651 2 59.0 7.1515 32.1794 2 60.0 7.1257 32.1858 3 61.0 7.1095 32.1925 2 62.0 7.0970 32.1944 2 63.0 7.0854 32.1960 1 64.0 7.0623 32.2011 3 65.0 7.0258 32.2124 2 66.0 6.9856 32.2314 3 67.0 6.9313 32.2535 2 68.0 6.8600 32.2572 2 69.0 6.7901 32.2622 2 70.0 6.7406 32.2691 3 71.0 6.7297 32.2941 2 72.0 6.7265 32.2962 1 73.0 6.7111 32.2951 2 74.0 6.6962 32.2942 2 75.0 6.6861 32.2959 2 76.0 6.6833 32.2971 2 77.0 6.6986 32.3024 3 78.0 6.7284 32.3157 2 79.0 6.7363 32.3232 3 80.0 6.7347 32.3335 2 81.0 6.7271 32.3423 2 82.0 6.7102 32.3529 2 83.0 6.6886 32.3587 2 84.0 6.6806 32.3640 2 85.0 6.6799 32.3681 2 86.0 6.6754 32.3695 2 87.0 6.6626 32.3780 2 88.0 6.6323 32.3911 3 89.0 6.6145 32.4000 2 90.0 6.5946 32.4098 2 91.0 6.5630 32.4202 2 92.0 6.5394 32.4306 2 93.0 6.4964 32.4333 2 94.0 6.4499 32.4453 3 95.0 6.4305 32.4511 2 96.0 6.4218 32.4555 2 97.0 6.4114 32.4627 2 98.0 6.3975 32.4721 2 99.0 6.3826 32.4908 3 100.0 6.3820 32.5059 2 101.0 6.3860 32.5106 2 102.0 6.3806 32.5213 3 103.0 6.3714 32.5285 2 104.0 6.3510 32.5334 2 105.0 6.3204 32.5415 2 106.0 6.2941 32.5506 2 107.0 6.2751 32.5582 3 108.0 6.2576 32.5633 2 109.0 6.2362 32.5714 2 110.0 6.2133 32.5816 2 111.0 6.1896 32.5884 3 112.0 6.1560 32.5991 2 113.0 6.1176 32.6154 3 114.0 6.0887 32.6287 2 115.0 6.0752 32.6365 4 116.0 6.0760 32.6381 6