*2013/12/16 15:19:04.15 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : UTC 1999/07/08 16:26:37.000 END TIME : UTC 1999/07/08 16:28:35.500 TIME INCREMENT : 0 0 0 0.5 0 ! (day hr min sec ms) NUMBER OF RECORDS : 97 DATA DESCRIPTION : CTD FILE TYPE : ASCII NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- --------------- -------------- -------------- 1 Pressure decibar 1 97 2 Temperature 'deg C (ITS90)' 6.3701 12.2578 3 Salinity PSS-78 30.6173 32.4812 4 Number_of_bin_records n/a 1 11 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -9.9 ' ' 7 F ' ' 1 2 -9.9 ' ' 9 F ' ' 4 3 ' ' ' ' 9 F ' ' 4 4 ' ' ' ' 3 I I 0 $END $REMARKS This file converted from Sea-Bird file: D:\Data\9922-SBE\Process\99220008.cnv $END *ADMINISTRATION MISSION : 1999-22 AGENCY : IOS, Ocean Physics Division, Sidney, B.C. COUNTRY : Canada PROJECT : Line P SCIENTIST : van Hardenberg B. PLATFORM : Sir Wilfrid Laurier *LOCATION GEOGRAPHIC AREA : Gulf of Alaska & Bering Sea STATION : KY-2 EVENT NUMBER : 8 LATITUDE : 59 47.04000 N ! (deg min) LONGITUDE : 144 0.01000 W ! (deg min) WATER DEPTH : 111 *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-19 SERIAL NUMBER : 1030 $TABLE: SENSORS ! Name Abs Depth Serial No ! ---- -------------- ---------- ' ' ' ' ' ' $END $REMARKS SOFTWARE VERSION 4.234 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- SBE_IOS 2.0 2002/02/18 13:27:49 795 795 REMOVECH 6.0 2002/02/18 19:32:18 795 795 CLIP 1.3 2006/01/13 08:43:13 534 394 REMOVECH 7.0 2006/01/16 11:55:38 394 394 FILTERS 4.3 2006/01/17 10:47:41 394 394 CALIB 11.7 2006/01/17 16:05:01 394 394 EXPFILT 1.1 2006/01/19 09:35:00 394 394 FILTERS 4.3 2006/01/19 09:39:34 394 394 DERIVEDQ 3.5 2006/01/19 11:53:55 394 394 SHIFTDAT 3.4 2006/01/19 12:22:00 394 394 CELLTM 1.3 2006/01/19 12:23:52 394 394 DELETE 6.3 2006/01/19 12:34:14 394 239 CALIB 11.7 2006/01/19 12:41:06 239 239 REMOVECH 7.0 2006/01/23 15:01:42 239 239 DERIVEDQ 3.5 2006/01/23 15:07:05 239 239 CLIP 1.3 2006/01/26 11:27:20 239 238 BINAVE 4.1 2006/01/26 13:47:46 238 98 CLIP 1.3 2006/01/30 09:37:35 98 97 REMOVECH 7.0 2006/01/30 09:54:26 97 97 HDREDIT2 2.5.1 2006/03/16 16:16:06 ? ? CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:19:04 97 97 $END $REMARKS -The following CHANNEL(S) were removed from file. Flag -Pressure was corrected using exponential fit to out-of-water data: Pcor(X)= Praw(X) -1.9 -11 *exp( -.0065 *X) where X=scan number -The following CLIP parameters were used. Clip by Record Number Limits First Record,Last Record = 140, 533 Time Calculated from Start and Interval: Get Start Time from Header Get Time Increment from Header -REMOVECH 2006/01/16 11:55:38 The following CHANNEL(S) were removed: Scan_Number -The following FILTER parameters were used. Boxcar filter was used. Filter width = 5 The following channel(s) were filtered. Pressure -CALIB parameters: 2006/01/17 16:05:01 Calibration type = Raw Mode: ONLY - calibration specs from Cal File only. Calibration file = D:\9922\Cratio-mS-cm.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 3 Conductivity ratio 10 0.0000000E+00 0.2330240E-01 0.0000000E+00 0.0000000E+00 0.0000000E+00 -The following EXPFILT parameters were used: Channels to Filter: Conductivity Salinity will NOT be Recalculated after Filtering Sampling Interval: 0.500 Filter Time Response: 0.500 Calculated Filter Coeff a= 0.582 -The following FILTER parameters were used. Boxcar filter was used. Filter width = 3 The following channel(s) were filtered. Temperature -The following DERIVEQ parameters were used Reference channel for pressure is: Pressure Reference channel for temperature is: Temperature Reference channel for conductivity ratio is: Conductivity Reference channel for salinity is: Salinity Reference channel for oxygen is: Oxygen:Dissolved:SBE Computed properties Derived Properties Ref Press Temp Type Replace ------------------ --------- --------- ------- Salinity Insitu Insitu YES -The following SHIFT parameters were used. Shift Channel: Temperature # of Records to Advance (-ve for Delay): At REC# 0 Shift= 0.90 Salinity was recalculated after shift -The following CELLTM parameters were used. Value for alpha = 0.0180, Value for tau = 12.0000 Temperature channel: Temperature -The following DELETE parameters were used: Surface Record Removal: Off Pressure filtered over width: 5 Swells deleted. Warning message if pressure difference of 2.00 Drop rates < 0.30m/s (calculated over 5 points) will be deleted. Drop rate applies in the range 1.00 to 91.66 dbars Sample interval (from FILE section of header) = 0.500 seconds. -CALIB parameters: 2006/01/19 12:41:06 Calibration type = Correct Mode: UNION - calibration specs from Header and Cal File. Salinity is computed Calibration file = D:\9922\T-adj.CCF Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 2 Temperature C 10 0.1000000E-01 0.1000000E+01 Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 5 Salinity PSS-78 130 Pressure Temperature Conductivity -REMOVECH 2006/01/23 15:01:42 The following CHANNEL(S) were removed: Temperature [C] Descent_Rate [m/s] Salinity [PSS-78] -The following DERIVEQ parameters were used Reference channel for pressure is: Pressure Reference channel for temperature is: Temperature Reference channel for conductivity ratio is: Conductivity Reference channel for salinity is: Salinity Reference channel for oxygen is: Oxygen:Dissolved:SBE Computed properties Derived Properties Ref Press Temp Type Replace ------------------ --------- --------- ------- Salinity Insitu Insitu YES -The following CLIP parameters were used. Clip by Channel Range Clip Channel: Pressure Min,Max = 0.000, 4000.000 Time Calculated from Start and Interval: Get Start Time from Header Get Time Increment from Header -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 1.00 Minimum bin value = 0.000 Bin value was used Interpolated values were used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CLIP parameters were used. Clip by Channel Range Clip Channel: Pressure Min,Max = 1.000, 2000.000 Time Not Available in File -REMOVECH 2006/01/30 09:54:26 The following CHANNEL(S) were removed: Conductivity [ratio] -HEADER EDITS: 2006/03/16 16:16:06 Applied edit header: O:\Data Processing\Header Comments\Work\1999-22-CTD.TXT Channel 1: Pressure [dbar] Units: DBAR ==> dbar Format: F13.3 ==> F7.1 Channel 2: Temperature [DEG C (ITS90)] Format: F13.4 ==> F9.4 Channel 3: Salinity [PSS-78] Format: F13.4 ==> F9.4 Channel 4: Number_of_bin_records [n/a] Format: I13 ==> I3 $END *COMMENTS SBE HEADER Sea-Bird SBE 19 Data File: FileName = \BON\9922-SBE\ky-300.HEX Software Version 4.234 Temperature SN = 1030 Conductivity SN = 1030 System UpLoad Time = Jul 08 1999 10:24:13 Ship: LAURIER Cruise: 9922 Station: KY-2 Latitude: 59 47.04N Longitude: 144 0.01W remarks: 2nd download? ds SEACAT PROFILER V3.1b SN 1030 07/08/99 17:25:38.609 strain gauge pressure sensor: S/N = 189759, range = 5000 psia, tc = -221 clk = 32768.094 iop = 136 vmain = 11.5 vlith = 5.7 mode = PROFILE ncasts = 2 sample rate = 1 scan every 0.5 seconds minimum raw conductivity frequency for pump turn on = 2500 hertz pump delay = 40 seconds samples = 1623 free = 85124 lwait = 0 msec SW1 = 88 battery cutoff = 7.3 volts number of voltages sampled = 0 logdata = NO S> cast 0 07/08 16:25:27 samples 0 to 795 sample rate = 1 scan every 0.5 seco nds stop = switch off # nquan = 6 # nvalues = 795 # units = specified # name 0 = scan: Scan Count # name 1 = prSM: Pressure, Strain Gauge [db] # name 2 = t090C: Temperature [ITS-90, deg C] # name 3 = c0mS/cm: Conductivity [mS/cm] # name 4 = dz/dtM: Descent Rate [m/s] # name 5 = flag: 0.000e+00 # span 0 = 1, 795 # span 1 = -13.129, 94.390 # span 2 = 6.3661, 12.2633 # span 3 = 0.305477, 36.208224 # span 4 = -1.440, 1.350 # span 5 = 0.0000e+00, 0.0000e+00 # interval = seconds: 0.5 # start_time = Jul 08 1999 16:25:27 # bad_flag = -9.990e-29 # sensor 0 = Frequency 0 temperature, 1030, 28Aug98 # sensor 1 = Frequency 1 conductivity, 1030, 28Aug98, cpcor = -9.5700e-08 # sensor 2 = Pressure Voltage, 189759, 26Aug98 # datcnv_date = Feb 18 2002 09:41:51, 5.2 # datcnv_in = D:\Data\9922-SBE\HeX\99220008.HEX D:\Data\9922-SBE\HeX\1030-98A.CO N # datcnv_skipover = 0 # file_type = ascii END* *CALIBRATION $TABLE: RAW CHANNELS ! Name Units Fmla Pad Coefficients ! -------------- ------- ---- ------ ------------ Conductivity ratio 10 -99 (0 0.233024E-01 0 0 0) $END $TABLE: CALCULATED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- -------- ---- ------ ------------ Salinity PSS-78 130 -99 (Pressure Temperature Conductivity) () $END $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ------------- ----- ---- ------ ------------ Temperature C 10 -99 () (0.1E-01 1) $END !--1--- ---2---- ---3---- 4- !Pressu Temperat Salinity Nu !re ure mb ! ~c ! or ! ds !------ -------- -------- -- *END OF HEADER 1.0 12.2039 30.6173 8 2.0 12.2064 31.0633 3 3.0 12.2094 31.0667 3 4.0 12.2063 31.0670 2 5.0 12.2044 31.0679 3 6.0 12.2048 31.0669 2 7.0 12.2110 31.0686 3 8.0 12.2181 31.0711 2 9.0 12.2208 31.0728 2 10.0 12.2262 31.0783 2 11.0 12.2324 31.0804 2 12.0 12.2408 31.0858 3 13.0 12.2500 31.0887 2 14.0 12.2578 31.0934 2 15.0 12.0519 31.0935 3 16.0 11.5063 31.0935 2 17.0 11.3547 31.0996 2 18.0 11.2971 31.1697 3 19.0 11.2343 31.2288 2 20.0 11.2040 31.2558 2 21.0 11.1896 31.2826 2 22.0 11.1567 31.3284 2 23.0 11.0783 31.3657 2 24.0 10.9736 31.4185 2 25.0 10.7287 31.5137 3 26.0 10.3588 31.6649 2 27.0 9.8365 31.8411 2 28.0 9.1938 31.9389 2 29.0 8.8286 31.9724 2 30.0 8.6074 31.9809 3 31.0 8.4701 31.9873 2 32.0 8.3906 31.9949 2 33.0 8.2084 31.9987 2 34.0 8.0034 32.0044 1 35.0 7.8522 32.0063 2 36.0 7.7386 32.0116 3 37.0 7.6724 32.0120 2 38.0 7.6165 32.0146 2 39.0 7.5336 32.0139 2 40.0 7.4824 32.0177 2 41.0 7.4583 32.0226 2 42.0 7.4501 32.0276 2 43.0 7.4516 32.0296 3 44.0 7.4723 32.0609 2 45.0 7.4495 32.0704 2 46.0 7.3981 32.0810 2 47.0 7.3712 32.0807 2 48.0 7.3582 32.0915 2 49.0 7.3275 32.1030 2 50.0 7.2746 32.1096 2 51.0 7.2274 32.1153 2 52.0 7.1895 32.1158 2 53.0 7.1501 32.1197 3 54.0 7.1246 32.1255 2 55.0 7.1132 32.1297 2 56.0 7.1024 32.1359 2 57.0 7.0940 32.1493 3 58.0 7.0894 32.1533 2 59.0 7.0960 32.1794 2 60.0 7.0977 32.1915 2 61.0 7.0905 32.1950 2 62.0 7.0604 32.1947 3 63.0 6.9948 32.1927 2 64.0 6.9713 32.2027 2 65.0 6.9790 32.2211 2 66.0 6.9417 32.2239 2 67.0 6.9063 32.2366 2 68.0 6.8923 32.2467 2 69.0 6.8836 32.2526 2 70.0 6.8760 32.2649 2 71.0 6.8379 32.2808 2 72.0 6.7920 32.2994 2 73.0 6.7738 32.3077 3 74.0 6.7622 32.3160 2 75.0 6.7244 32.3343 3 76.0 6.6837 32.3532 2 77.0 6.6631 32.3593 2 78.0 6.6488 32.3645 2 79.0 6.5991 32.3811 2 80.0 6.5350 32.3949 2 81.0 6.5040 32.4096 2 82.0 6.4885 32.4193 2 83.0 6.4713 32.4273 2 84.0 6.4471 32.4289 2 85.0 6.4291 32.4368 3 86.0 6.4227 32.4449 2 87.0 6.4188 32.4465 2 88.0 6.4159 32.4465 3 89.0 6.4148 32.4483 3 90.0 6.4142 32.4506 2 91.0 6.4116 32.4519 2 92.0 6.4083 32.4554 3 93.0 6.4043 32.4613 3 94.0 6.3973 32.4677 3 95.0 6.3822 32.4773 3 96.0 6.3728 32.4812 11 97.0 6.3701 32.4802 6